声明农场门或初级整理门的新鲜菠萝
- 生命周期状态
- 候选
- 内容成熟度
- 已编写方法学
- 当前版本
- 尚未发布版本最后更新
- 使用就绪度
- 尚待评审
方法学与翻译状态由源文件记录;网站发布不会改变其评审状态。
内容语言
查看状态、分类与来源详情
使用就绪度
- 提示项 methodology_not_reviewed Authored methodology is candidate guidance and still requires methodology review.
分类映射
源文件
1. 范围与适用性
本 PCR 用于 CPC 3.0 01318“Pineapples”对应的完整新鲜菠萝前景数据包。范围包括建植和生产管理、繁殖材料、养分、灌溉、作物保护、田间能源、土地占用、管理土壤排放、采收、田间交接,以及当声明门位于清洗、分选、修整或短期冷却之后时的可选初级整理。
默认门是农场门或田间交接门。数据包可以在所代表的路线包含初级整理时声明初级整理门,并必须声明植株或宿根/再生周期、作物年度、重要时的品种、地理位置、灌溉和水源状态、成熟度或质量类别、合格比例、损失和声明门。果汁、罐藏、干燥、冷冻、发酵、切分、加糖或其他加工产品,零售和消费者使用,独立苗圃系统以及声明门之后物流均不在范围内。
2. 产品类别识别
| 字段 | 值 |
|---|---|
| canonical_pcr_id | pcr.agriculture-forestry-and-fishery-products.products-of-agriculture-horticulture-and-market-gardening.pineapples |
| classification_refs | CPC 3.0 01318,Pineapples; mapping relation: exact |
| covered_products | 声明植株或宿根/再生作物在农场门、田间交接门或可选初级整理门的完整新鲜菠萝 |
| excluded_products | 果汁;罐藏、干燥、冷冻、发酵、切分、加糖或配制产品;零售成品;消费者使用;独立商业苗圃繁殖 |
| representative_product | 在声明成熟度、质量、处理状态及农场门或初级整理门的完整新鲜菠萝 |
| production_route | 菠萝建植、植株或宿根/再生生产、采收、田间交接以及可选初级整理或冷却 |
| market_state | 记录重要时的品种、成熟度或等级、周期、地理位置和声明门的散装或声明包装完整新鲜菠萝 |
3. 参考流
| 字段 | 值 |
|---|---|
| What | 声明农场门、田间交接门或初级整理门的完整新鲜菠萝 |
| How much | 1 kg |
| How well | 重要时的品种;植株或宿根/再生周期;成熟度或质量类别;地理位置;作物年度;灌溉和水源状态;合格比例;处理状态;以及声明门 |
| How long or cycle | 一个声明的生产周期和作物年度;披露种植、宿根/再生、重植和生产年限处理 |
| reference_flow_link | reference_product_at_declared_handoff |
| 字段 | 值 |
|---|---|
| 参考数量 | 1 |
| 参考产品流 | 声明门的完整新鲜菠萝\ |
| 参考流属性 | 质量 93a60a56-a3c8-11da-a746-0800200b9a66 |
| 参考单位组 | 质量单位组 93a60a57-a4c8-11da-a746-0800200c9a66 |
| 参考单位 | kg |
| 必需限定信息 | 完整新鲜果实;重要时的品种;植株或宿根/再生周期;作物年度;地理位置;成熟度或质量类别;灌溉和水源状态;合格比例;处理状态;声明门;产品身份绑定状态 |
构建前景数据包时,必需限定信息 必须在数据包中声明。没有明确门声明时,不得从整理后果实身份推定农场门身份。
每份前景数据包须声明实际路线、终端产品状态和交接门,保留原始称量、质量平衡及批次追溯记录。以该门的唯一交接参考输出归一化,前序工序采用实测转移数量。
唯一参考输出为 reference_product_at_declared_handoff,由下列实际路线在声明交接门的产品承接。原路线输出编号用于追溯实际来源和物理状态,不再分别固定为参考数量。
4. 计量与单位规则
| rule_id | 适用对象 | 必需流属性 | 必需单位 | 规则 |
|---|---|---|---|---|
reference_mass | 参考产品 | 质量 | kg | 参考流以声明门完整新鲜菠萝的净 kg 表示,并保留收货基准。 |
cycle_and_yield_basis | 生产和产出 | 质量和时间 | kg 和周期标识 | 分别记录植株及每个宿根/再生或重植周期,并按同一周期和合格产出基准归一化。 |
nutrient_product_basis | 肥料和土壤改良剂 | 质量 | kg 产品和 kg 养分 | 每种实际肥料或改良剂产品单独列卡,保留实物质量、配方、养分组成和施用记录;养分量不是同一产品的另一次投入,不使用集合或分组标识代替具体流身份。 |
water_and_energy_basis | 灌溉、取水、燃料和电力 | 体积、质量或能量 | m3、L、kg、MJ 或 kWh | 水源取水、输送灌溉、泵送能源、田间燃料和电力在归一化前保持区分。 |
output_quality_basis | 采收、整理和损失 | 质量和质量 | kg 和声明质量基准 | 以同一声明基准核对采收果实、合格果实、次品、残余物、损失和整理产出。 |
5. 系统边界
边界概化
| 字段 | 值 |
|---|---|
| declared_starting_condition | planting_material_and_declared_pineapple_crop_cycle |
| starting_condition_role | crop_establishment_or_ratoon_cycle_start |
| product_classification_scope | CPC 3.0 01318 对应的完整新鲜菠萝;加工和苗圃产品不在范围内 |
| recursive_input_rule | 同类菠萝用作种植或宿根/再生材料时,记录来源、批次、周期及上游披露作为繁殖投入,不得默认为新鲜参考产品。 |
| upstream_dataset_requirement | 为繁殖材料、肥料和改良剂、作物保护、电力、燃料、水、运输、整理、废物处理和排放因子确定数据集或记录。 |
| disclosure | 声明周期、种植和宿根/再生处理、地理位置、品种、作物年度、面积、产量、质量基准、路线、门、产出归宿、分配和身份证据缺口。 |
边界规则
| rule_id | 适用对象 | 规则 | source_ids |
|---|---|---|---|
boundary_crop_establishment_and_maintenance | 田间生产 | 包括建植、土壤和田间准备、养分和改良剂、灌溉、作物保护、田间作业、土地占用及采收前管理土壤排放。 | fao-gap-framework-2003;fao-gap-framework-2003;ipcc-2019-refinement |
boundary_harvest_and_field_delivery | 采收和田间交接 | 当属于前景范围时,包括采收、收集、内部搬运以及至声明农场门或田间交接门的运输。 | fao-gap-framework-2003;fao-postharvest-handling-ae075e |
boundary_primary_conditioning | 可选整理 | 只有声明门位于这些操作之后时,才包括清洗、分选、修整、冷却、整理能源、废水和次品。 | codex-cxs-182-1993;fao-postharvest-handling-ae075e |
boundary_downstream_exclusion | 下游加工和使用 | 排除果汁、罐藏、干燥、冷冻、发酵、切分、加糖、零售、消费者使用及声明门后的物流。 | codex-cxs-182-1993;iso-14067 |
boundary_input_completeness | 所有路线 | 对繁殖材料、养分、作物保护、水、土地、能源、采收、运输、排放、产出归宿和整理投入给出数值、合理为零或文件化排除。 | fao-gap-framework-2003;ipcc-2019-refinement;mass-balance-identity |
6. 过程清单结构
过程图
| process_id | 过程名称 | 纳入状态 | 纳入条件 | 建模角色 | 定量参考 |
|---|---|---|---|---|---|
pineapple_crop_production | 菠萝建植与生产管理 | required | foreground | 周期投入和采收果实产出 | |
pineapple_harvest_and_delivery | 菠萝采收与田间交接 | required | foreground | 农场门或田间交接门的完整果实 | |
pineapple_primary_conditioning | 菠萝初级整理与声明门 | conditional | 声明门位于清洗、分选、修整、包装或冷却之后时纳入 | foreground | 所选门的整理后果实 |
| declared_reference_handoff | 声明交接门的产品计量 | required | foreground | reference_product_at_declared_handoff |
过程:菠萝建植与生产管理(pineapple_crop_production)
输入
产品流
种植或宿根/再生繁殖材料(propagation_material_input)
记录种植苗、冠芽、吸芽或保留的宿根/再生材料及来源和周期。
-
选定流:建植用菠萝繁殖材料(unmapped)
-
流属性/单位:质量或换算为声明质量的数量 / kg 或 count
-
数量规则:实测数量和质量,保留换算依据
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_propagation_and_cycle_records -
来源:
fao-gap-framework-2003
尿素肥料(pineapple_crop_production_agricultural_nutrient_inputs_urea)
pineapple_crop_production_agricultural_nutrient_inputs 的采集范围与适用性。 下列具体身份分别列卡,仅在原有过程范围内有实际使用或产生记录时启用;不是必用材料清单或默认配方。未发生须有依据,缺少记录不得记为零。其他实际材料必须另建具体身份卡,不能套用以下名称或 UUID。保留原有归属和边界,避免与包含这些投入的外包服务双计。
逐一采集每种肥料产品。保留每种实际产品的身份、数量、配方、养分组成、施用事件和分配关系;复合产品不得重复计数。 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出.
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:尿素
3f8850c0-f718-4c4b-8fcb-8fd42e03aa8e - 流属性 / 单位:质量 / kg
- 数量规则:依
cp_fertilizer_and_amendment_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_fertilizer_and_amendment_records - 来源:
fao-gap-framework-2003;ipcc-2019-refinement;fao-fertilizer-identities
仅当实际配方及等级兼容时使用此产品身份。保留供应商组成及质量记录,不以养分质量、稀释溶液质量或服务活动替代产品质量。UUID本身不提供剂量或排放因子。
硫酸铵肥料(pineapple_crop_production_agricultural_nutrient_inputs_ammonium_sulfate)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:硫酸铵
8c6f0cbb-16d7-4dc9-8d55-e8dea17d7faf - 流属性 / 单位:质量 / kg
- 数量规则:依
cp_fertilizer_and_amendment_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_fertilizer_and_amendment_records - 来源:
fao-gap-framework-2003;ipcc-2019-refinement;fao-fertilizer-identities
仅当实际配方及等级兼容时使用此产品身份。保留供应商组成及质量记录,不以养分质量、稀释溶液质量或服务活动替代产品质量。UUID本身不提供剂量或排放因子。
重过磷酸钙肥料(pineapple_crop_production_agricultural_nutrient_inputs_triple_superphosphate)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:重过磷酸钙肥料
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_fertilizer_and_amendment_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_fertilizer_and_amendment_records - 来源:
fao-gap-framework-2003;ipcc-2019-refinement;fao-fertilizer-identities
氯化钾肥料(pineapple_crop_production_agricultural_nutrient_inputs_potassium_chloride)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:氯化钾肥料
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_fertilizer_and_amendment_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_fertilizer_and_amendment_records - 来源:
fao-gap-framework-2003;ipcc-2019-refinement;fao-fertilizer-identities
作为肥料施用的牛粪(pineapple_crop_production_agricultural_nutrient_inputs_cattle_manure)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:作为肥料施用的牛粪
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_fertilizer_and_amendment_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_fertilizer_and_amendment_records - 来源:
fao-gap-framework-2003;ipcc-2019-refinement;fao-organic-nutrients
施入土壤的植物残体堆肥(pineapple_crop_production_agricultural_nutrient_inputs_plant_compost)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:施入土壤的植物残体堆肥
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_fertilizer_and_amendment_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_fertilizer_and_amendment_records - 来源:
fao-gap-framework-2003;ipcc-2019-refinement;fao-organic-nutrients
灌溉供水(irrigation_water_input)
将输送的灌溉水、源头取水和泵送能源分别记录。
-
选定流:灌溉供水(unmapped 或 parameterized)
-
流属性/单位:体积 / m3
-
数量规则:按田块和事件计量或记录的输送灌溉量
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_irrigation_and_withdrawal_records -
来源:
fao-crop-evapotranspiration-56;fao-gap-framework-2003
柴油 (field_machinery_fuel_diesel)
仅适用于本作业有记录的柴油机械。保留燃料牌号及配方,体积按实测或供应商支持的密度换算。其他动力系统按实际载能体记录,不用柴油当量替代。执行field_machinery_fuel_specific_input,本示例不是必用投入。不重复计入机械服务包含项,也不对现场发电内部转移的电力再计外购供电;实际燃料燃烧及发电排放仍须单独核算。
- 选定流:柴油
9d258d75-6792-4f1c-9856-81602ed8f816 - 流属性 / 单位:质量
93a60a56-a3c8-11da-a746-0800200b9a66/ kg - 数量规则:按
cp_field_energy_records采集pineapple_crop_production的该载能体用量。共用量仅归属一次,归属原始量乘声明参考数量,再除以相同产品单位下匹配的最终合格产出数量;保留实测阶段吞吐及原有分配规则,不对已归一化量再次归一化。 - 数值来源模式:
calculated_value - 适用范围:
site_specific - 归一化基准:per declared reference flow
- 基准类型:
reference_flow - 证据类型:
calculated_from_collection - 采集协议:
cp_field_energy_records - 来源:
route-energy-fao
废物流
基本流
菠萝生产土地占用(pineapple_land_occupation)
记录菠萝生产周期所代表的占用面积和持续时间。
-
选定流:农业土地占用
-
流属性/单位:面积-时间 / ha-year
-
数量规则:实测面积乘占用时间并分配至周期
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:由采集计算(
calculated_from_collection) -
采集协议:
cp_land_and_cycle_records -
来源:
fao-gap-framework-2003
水源取水(water_source_withdrawal)
将水源取水与作物实际灌溉供水分开记录,并保留水源和事件依据。
-
选定流:水资源取水
-
流属性/单位:体积 / m3
-
数量规则:按田块、水源和事件计量或记录水源取水
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_irrigation_and_withdrawal_records -
来源:
fao-crop-evapotranspiration-56
输出
产品流
可采收菠萝作物产出(harvestable_pineapple_crop)
记录从栽培转入采收的作物质量,并保留等级和采收时间。
-
选定流:采收交接的完整新鲜菠萝作物(unmapped)
-
流属性/单位:质量 / kg
-
数量规则:进入采收的实测或核算作物质量
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_harvest_and_output_records -
来源:
fao-gap-framework-2003;mass-balance-identity
废物流
输出
基本流
直接土壤氧化亚氮排放(direct_soil_n2o_emission)
根据记录的养分、残余物和土壤管理投入,使用一种选定的因子方法计算声明的直接土壤排放。
-
选定流:排放至空气的氧化亚氮(unmapped 或 parameterized)
-
流属性/单位: Mass / kg N2O
-
数量规则:根据肥料、改良剂、残余物和土壤氮投入计算
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:方法公式(
method_formula) -
采集协议:
cp_fertilizer_and_amendment_records -
来源:
ipcc-2019-refinement
最终交换为 kg N2O。该物种的元素氮活动量以及按氮计的因子/范围保留在独立计算台账。归一化前将该物种的氮质量乘 44/28,仅换算一次;化合物质量不得再次换算,按氮计的范围不得直接校验化合物质量。未经有据拆分,不得将总氮损失作为该物种。保留实际接收环境与方法边界;未知身份或活动量不等于零。
过程:菠萝采收与田间交接(pineapple_harvest_and_delivery)
输入
产品流
进入采收的作物(crop_received_for_harvest)
记录进入采收作业的作物质量,并保留用于核算的田块、批次、质量和时间信息。
-
选定流:进入采收的完整新鲜菠萝作物(unmapped)
-
流属性/单位:质量 / kg
-
数量规则:采收入口的实测作物质量
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_harvest_and_output_records -
来源:
fao-gap-framework-2003
柴油 (harvest_machinery_fuel_diesel)
仅适用于本作业有记录的柴油机械。保留燃料牌号及配方,体积按实测或供应商支持的密度换算。其他动力系统按实际载能体记录,不用柴油当量替代。执行harvest_machinery_fuel_specific_input,本示例不是必用投入。不重复计入机械服务包含项,也不对现场发电内部转移的电力再计外购供电;实际燃料燃烧及发电排放仍须单独核算。
- 选定流:柴油
9d258d75-6792-4f1c-9856-81602ed8f816 - 流属性 / 单位:质量
93a60a56-a3c8-11da-a746-0800200b9a66/ kg - 数量规则:按
cp_harvest_energy_records采集pineapple_harvest_and_delivery的该载能体用量。共用量仅归属一次,归属原始量乘声明参考数量,再除以相同产品单位下匹配的最终合格产出数量;保留实测阶段吞吐及原有分配规则,不对已归一化量再次归一化。 - 数值来源模式:
calculated_value - 适用范围:
site_specific - 归一化基准:per declared reference flow
- 基准类型:
reference_flow - 证据类型:
calculated_from_collection - 采集协议:
cp_harvest_energy_records - 来源:
route-energy-fao
采收到声明门的公路运输服务(harvest_road_transport)
记录从采收交接到声明门的运输服务,包括距离、载荷和承运依据。
-
选定流:公路货运运输服务
-
流属性/单位:质量-距离 / tonne-km 或声明服务单位
-
数量规则:采收到声明门的载荷、距离和路线
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_harvest_transport_records -
来源:
fao-postharvest-handling-ae075e
废物流
输出
产品流
农场门或田间交接门的完整新鲜菠萝(fresh_pineapple_farm_gate_output)
记录在声明农场门或田间交接门交付的合格新鲜菠萝,并与采收投入和损失核对。
-
选定流:声明农场门或田间交接门的完整新鲜菠萝(unmapped)
-
流属性/单位:质量 / kg 原始产出计量与核对要求:按批次记录净合格果实质量并保留质量基准和门
-
数量规则:实测净转移质量,保留批次、实际产品状态和含水率基准;在声明交接门对账至最终参考输出。
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:声明门每 1,000 kg 合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_harvest_and_output_records -
来源:
codex-cxs-182-1993;mass-balance-identity
废物流
采收次品和田间损失(harvest_culls_and_losses)
将次品和采收损失与合格水果分开记录,并保留声明的去向或处理方式。
-
选定流:有声明归宿的菠萝次品或采收损失(unmapped)
-
流属性/单位:质量 / kg
-
数量规则:按批次和归宿记录次品及损失质量
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_harvest_and_output_records -
来源:
mass-balance-identity;fao-postharvest-handling-ae075e
基本流
过程:菠萝初级整理与声明门(pineapple_primary_conditioning)
输入
产品流
进入初级整理的果实(fruit_received_for_conditioning)
记录进入初级整理的新鲜水果批次及其门点、质量和质量基础。
-
选定流:进入初级整理的完整新鲜菠萝(unmapped)
-
流属性/单位:质量 / kg
-
数量规则:整理入口的批次实测质量
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_conditioning_and_gate_records -
来源:
fao-postharvest-handling-ae075e
整理用水(conditioning_water_input)
将清洗或初级整理用水与水源取水分开记录,并保留事件依据。
-
选定流:工艺用水
-
流属性/单位:体积 / m3
-
数量规则:按批次计量或记录的整理用水
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_conditioning_water_records -
来源:
fao-postharvest-handling-ae075e
整理用电(conditioning_electricity_input)
记录初级整理设备使用的电力,并关联到整理批次或运行期间。
-
选定流:电力供应
-
流属性/单位:能量 / kWh
-
数量规则:按仪表或设备记录分配到果实批次
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_conditioning_energy_records -
来源:
fao-postharvest-handling-ae075e
废物流
基本流
输出
产品流
整理后的完整新鲜菠萝(conditioned_pineapple_gate_output)
记录声明初级整理边界后的合格完整新鲜菠萝,并保留其质量基础。
-
选定流:声明初级整理后的完整新鲜菠萝(unmapped)
-
流属性/单位:质量 / kg 原始产出计量与核对要求:整理后的合格产出实测质量
-
数量规则:实测净转移质量,保留批次、实际产品状态和含水率基准;在声明交接门对账至最终参考输出。
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:声明门每 1,000 kg 合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_conditioning_and_gate_records -
来源:
codex-cxs-182-1993;mass-balance-identity
废物流
整理损失(conditioning_loss)
在相同质量和质量基础上核对整理输入、合格输出和移出物料。
-
选定流:有声明归宿的整理损失(unmapped)
-
流属性/单位:质量 / kg
-
数量规则:在同一质量和质量基准上核对投入和产出
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 声明门合格新鲜菠萝产出. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:由采集计算(
calculated_from_collection) -
采集协议:
cp_conditioning_and_gate_records -
来源:
mass-balance-identity
基本流
过程:声明边界的产品交接计量(declared_reference_handoff)
该节点记录既有系统边界上的实际交接数量,用于对账和参考数量归一化。它不代表新增物理工序,不自动引入干燥、冷却、储存、包装或运输。每份数据包须声明一条实际路线、一个终端产品状态、含水率或干物质基准及交接门。仅将该路线在此交接门的合格产品传入本节点;其他路线不得作为额外投入,联产品另行记录并按第 7 节处理。前序工序的投入、损失和排放只计一次。以实际交接净质量作为归一化分母;计量对账节点不改变质量、产率或分配结果。
输入
产品流
实际路线的交接产品(actual_route_product_for_handoff)
记录实际终端路线交付的合格产品;与交接门称重和批次记录对账。
- 选定流:声明门的完整新鲜菠萝\
- 流属性 / 单位:质量 / kg
- 数量规则:实际交接门的实测合格产品净质量,按参考数量归一化;不得汇总前序各阶段数量,不得计入其他路线或联产品。
- 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:过程输出(
process_output) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_declared_reference_handoff - 数量范围:交接数量归一化恒等式
- 范围角色:QA 校验(
qa_guardrail) - 下限:1
- 上限:1
- 单位:kg/kg 同状态交接净质量
- 基准:同一交接状态的实测净质量归一化;不表示物理工序的产率
- 基准类型:过程输出(
process_output) - 证据类型:方法公式(
method_formula) - 来源:
declared-handoff-measurement-definition
- 范围角色:QA 校验(
废物流
该计量节点不产生新的废物投入。
基本流
该计量节点不产生新的资源投入。
输出
产品流
声明交接门的参考产品(reference_product_at_declared_handoff)
- 选定流:声明门的完整新鲜菠萝\
- 流属性 / 单位:质量 / kg
- 数量规则:1 kg
- 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:过程输出(
process_output) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_declared_reference_handoff实际状态的产品 UUID 须独立核实;当前未确认时保持待核实,不继承前序或其他路线的 UUID。 - 数量范围:交接数量归一化恒等式
- 范围角色:QA 校验(
qa_guardrail) - 下限:1
- 上限:1
- 单位:kg/kg 同状态交接净质量
- 基准:同一交接状态的实测净质量归一化;不表示物理工序的产率
- 基准类型:过程输出(
process_output) - 证据类型:方法公式(
method_formula) - 来源:
declared-handoff-measurement-definition
- 范围角色:QA 校验(
废物流
实际损失已在发生工序记录;不得在此重复记录。
基本流
实际排放已在发生工序记录;不得在此重复记录。
7. 分配与共产品处理
| rule_id | 适用对象 | 规则 | source_ids |
|---|---|---|---|
allocation_subdivision_priority | 生产、采收和整理 | 当记录支持独立节点时,优先拆分植株、宿根/再生、采收、田间交接、整理和储存责任。 | iso-14044;fao-gap-framework-2003 |
allocation_plant_and_ratoon_cycles | 共享田间和基础设施负荷 | 使用声明周期、持续时间和合格产出基准分配共享建植及多周期负荷;信息不完整时披露敏感性。 | iso-14044;fao-gap-framework-2003 |
allocation_fruit_and_nonreference_outputs | 合格果实、次品、残余物和损失 | 分别记录预期产出、残余物、次品和废物及归宿;不能拆分时采用声明的物理或经济方法并披露替代方案。 | iso-14044;mass-balance-identity |
具体身份卡不继承原集合卡的数量范围。实际数量由原始记录、库存/计量对账及声明参考流计算;在取得对应身份、单位、期间和边界一致的证据前,不提供默认量或数值筛查范围。缺少范围是质量披露项,并非零投入或完整性证明。
| rule_id | Applies to | Rule | source_ids |
|---|---|---|---|
allocation_residual_precedence | 未规定主方法分支的剩余共同负担 | 本 PCR 要求研究作联产品分配决策但未规定主方法的地方,统一执行以下优先顺序;已明确规定的类别专属主方法保持有效。先直接归属可分开的产出专属作业。剩余共同负担 B 只有在实测作业或生物服务记录证明驱动量 d_i 代表因果消耗时,才采用该物理驱动。产品可称量、有价值或等级较低本身均不构成因果依据,不能在面积、时间、质量和收入间任意切换。可比等级接受相同共同搬运服务时,仅在服务需求、状态及水分基准可比且有据时采用实测处理质量。份额 a_i=d_i/sum(d_j),B_i=Ba_i。该共同作业没有可辩护的因果物理驱动时,采用同交接点、同期间经济份额 a_i=(q_ip_i)/sum(q_j*p_j),纳入全部独立预期产出,匹配数量/价格单位、币种和代表性价格,使用产出专属下游加工之前的价值。缺价格或分母证据使分配结果不完整,不能把产品价格记零或改称单一产出系统。披露合计为一的份额和重要替代方法敏感性;敏感性方法不是可任意替换的主结果。废物、留存残余和内部转移不获得联产品份额,其应归属的生产/处理负担仍保留在产出可售产品的路线中。未分配物理数量和质量平衡另行保留。本分支不自动给予替代信用;单独界定的替代情景须保留总清单及实际被替代功能证据。 | ghg-protocol-product-standard-2011 |
8. 前景数据采集、计算与质量规则
完成数据集前确认具体投入身份
依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。
| requirement_id | collection_protocol_id | 保留的采集范围 |
|---|---|---|
crop_protection_input_specific_input | cp_crop_protection_records | 作业 pineapple_crop_production: 原数量方法:按有效成分和施用事件记录产品质量 |
field_machinery_fuel_specific_input | cp_field_energy_records | 作业 pineapple_crop_production:记录燃料类型、数量、机械或服务商、田间作业和报告期间。 原数量方法:按作业和周期的燃料实测或承包商记录 |
harvest_machinery_fuel_specific_input | cp_harvest_energy_records | 作业 pineapple_harvest_and_delivery:记录采收及相关机械作业或承包服务使用的燃料或能源。 原数量方法:按批次或事件记录采收作业能源 |
先按各采集协议保留原始场址、批次、周期及阶段数量与分母,并完成库存、损失、含水率和共产品归属核对;随后按实际归属的验收交付产品量归一化:归一化交换量 = 归属原始交换量 × 声明参考数量 / 同一边界和计量基准的验收产品量。多年生建植和共享作业先执行各自分摊规则,不得把内部转移数量设为最终参考数量。每声明的参考流指第 3 节的数量、单位和产品状态;数据包必须声明实际路线和门。
数据采集协议
| protocol_id | process_id | flow_role | record_type | raw_fields | collection_method | unit | frequency | temporal_coverage | site_scope | aggregation_rule | quality_evidence |
|---|---|---|---|---|---|---|---|---|---|---|---|
cp_propagation_and_cycle_records | pineapple_crop_production | propagation and cycle | planting or ratoon record | material; source; lot; count; mass; date; field; cycle | supplier record, planting log, or survey;原始汇总与分配:sum by field and cycle and retain conversion | count, kg, date | per establishment or cycle | represented crop cycle | field or farm | 每声明的参考流 | supplier document, field log |
cp_fertilizer_and_amendment_records | pineapple_crop_production | fertilizer and amendment | purchase and application record | product; nutrient; product mass; nutrient mass; date; field | invoice, analysis, log, or applicator record;原始汇总与分配:sum by product and nutrient and normalize | kg product and kg nutrient | per application | crop cycle | field or farm | 每声明的参考流 | invoice, label, analysis, log |
cp_irrigation_and_withdrawal_records | pineapple_crop_production | irrigation and withdrawal | meter or pumping record | source; meter; readings; volume; pumping energy; date; field | calibrated meter, pumping log, or invoice;原始汇总与分配:keep withdrawal and delivered irrigation distinct | m3 and energy | per event or period | irrigation season | field and source | 每声明的参考流 | calibration, readings, invoice |
cp_crop_protection_records | pineapple_crop_production | crop protection | application record | product; active ingredient; rate; date; field | farm log, invoice, and label;原始汇总与分配:sum by product and active ingredient crop_protection_input_specific_input: 作业 pineapple_crop_production: 原数量方法:按有效成分和施用事件记录产品质量 依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。 | kg product and kg active ingredient | per application | crop cycle | field or farm | 每声明的参考流 | label, invoice, log |
cp_field_energy_records | pineapple_crop_production | field energy | machine or contractor record | machine; operation; carrier; quantity; date; field | fuel log, meter, telematics, or invoice;原始汇总与分配:aggregate by operation and normalize field_machinery_fuel_specific_input: 作业 pineapple_crop_production:记录燃料类型、数量、机械或服务商、田间作业和报告期间。 原数量方法:按作业和周期的燃料实测或承包商记录 依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。 | L, kg, MJ, or kWh | per operation or period | crop cycle | field and farm | 每声明的参考流 | invoice, meter, telematics |
cp_land_and_cycle_records | pineapple_crop_production | land and cycle | field record | field; area; planting date; ratoon status; duration; year | field map and production register;原始汇总与分配:reconcile area and duration before allocation | ha, date, year | per field and cycle | represented cycle | field or farm | 每声明的参考流 | field map, register |
cp_harvest_and_output_records | pineapple_harvest_and_delivery | harvest and outputs | harvest and delivery record | field; lot; date; mass; quality; culls; losses; fate; gate | calibrated scale, harvest log, delivery ticket;原始汇总与分配:reconcile inputs and outputs by lot | kg, date, quality | per event | crop cycle | field to gate | 每声明的参考流 | calibration, log, ticket |
cp_harvest_energy_records | pineapple_harvest_and_delivery | harvest energy | machine or contractor record | machine; operation; carrier; quantity; mass; period | fuel log, telematics, meter, or invoice;原始汇总与分配:allocate by harvested mass harvest_machinery_fuel_specific_input: 作业 pineapple_harvest_and_delivery:记录采收及相关机械作业或承包服务使用的燃料或能源。 原数量方法:按批次或事件记录采收作业能源 依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。 | L, kg, MJ, or kWh | per event or period | crop cycle | harvest operation | 每声明的参考流 | invoice, telematics, meter |
cp_harvest_transport_records | pineapple_harvest_and_delivery | field delivery | transport record | vehicle; payload; distance; route; date; lot; gate | weighbridge, route log, and invoice;原始汇总与分配:sum payload-distance by lot and route | tonne-km or service unit | per movement | crop cycle | harvest to gate | 每声明的参考流 | weighbridge, route record |
cp_conditioning_and_gate_records | pineapple_primary_conditioning | fruit, outputs, and gate | conditioning batch record | input; water; electricity; culls; wastewater; output; quality; gate | batch sheet, meters, scale, treatment record;原始汇总与分配:reconcile input, output, culls, wastewater, and loss | kg, m3, kWh, quality | per batch | conditioning period | conditioning site | 每声明的参考流 | calibration, batch and treatment records |
cp_conditioning_water_records | pineapple_primary_conditioning | conditioning water | meter or batch record | source; meter; batch; volume; date; lot | calibrated meter or batch sheet;原始汇总与分配:sum by source and batch | m3 | per batch or period | conditioning period | conditioning site | 每声明的参考流 | calibration, batch record |
cp_conditioning_energy_records | pineapple_primary_conditioning | conditioning energy | meter or equipment record | equipment; operation; electricity; period; lot; mass | meter, equipment log, or invoice;原始汇总与分配:allocate by lot mass and operation | kWh or MJ | per batch or period | conditioning period | conditioning site | 每声明的参考流 | meter, log, invoice |
cp_declared_reference_handoff | declared_reference_handoff | reference_product_at_declared_handoff | 交接计量与验收记录 | route, terminal_output_row_id, product_state, gate, lot, net_mass_kg, moisture_basis, acceptance, tare | 采用校准衡器或可追溯称重记录,将实际终端工序交接批次与验收净质量、产品状态及含水率对账;剔除包装皮重,不汇总前序阶段数量。 | kg | 每交接批次 | 声明报告期 | 声明交接门 | 每声明的参考流 | 校准或称重凭证、验收和批次追溯 |
计算规则
| rule_id | Applies to | Formula or rule | Inputs | Output | source_ids |
|---|---|---|---|---|---|
calc_reference_normalization | all inventory rows | normalized amount = recorded amount / accepted fresh pineapple output × 1 kg | recorded amount; accepted output; gate and cycle | amount per 1 kg accepted output | mass-balance-identity |
calc_cycle_allocation | plant and ratoon cycles | 按声明周期持续时间和合格产出分配共享田间及建植记录,并披露基准和敏感性。 | area; duration; output; shared input | cycle-attributed input or emission | iso-14044;fao-gap-framework-2003 |
calc_nutrient_basis | fertilizer and amendments | nutrient mass = product mass × declared nutrient fraction;分别保留产品和养分。 | product mass; label or analysis fraction | kg nutrient and kg product | fao-gap-framework-2003 |
calc_managed_soil_emission | soil emissions | 将选定方法层级应用于养分、改良剂、残余物和土壤投入;仅在需要时换算 N2O-N 并披露因子。 | inputs; factor; conversion | emission by substance and compartment | ipcc-2019-refinement;emep-eea-2023-guidebook |
calc_output_reconciliation | harvest and conditioning | input mass = accepted output + culls + residues + measured loss,先统一声明基准。 | input; output; culls; residues; loss | mass-balance result and discrepancy | mass-balance-identity |
conditioning_culls_and_wastewater_specific_exchanges | pineapple_primary_conditioning | 将菠萝拒收果、分离固体残余物和处理废水分别枚举为实际物流。逐流计量,保留各自组成、状态、原生单位、批次/期间及去向;每个具体物流和边界角色建立一张独立卡。区分废物转移、外购处理服务及具体物质排放,不得把处理服务作为废水本身,也不得重复处理负荷。分别保留库存、返工、销售降级品及弃置废物;物理混合物流只计一次,不得再将其组分作为额外输出重复计入。 保留相连采集协议和实际过程归属,按原始阶段基准恢复各自可归属的原始分子量,再按匹配的合格参考产出归一化一次。缺少身份、数量、单位或去向会阻止数据集完整性通过;确认不存在必须有依据,不得默认零值。 | cp_conditioning_and_gate_records | 逐项独立交换;完成前必须补齐 | fao-postharvest-handling-ae075e; mass-balance-identity |
chemical_species_mass_accounting | elementary_nutrient_emissions | 最终基本交换使用已识别物质的质量和一个实际接收环境,养分/活动台账另存:该物种的 N2O-N × 44/28 为 N2O,NH3-N × 17/14 为 NH3,硝酸盐氮 × 62/14 为硝酸盐,磷酸盐磷 × 95/31 为磷酸盐。若选定流为元素磷,则报告 kg P,仅在物种口径有据时将磷酸盐质量乘 31/95。只有方法输出按元素计时才换算一次,实测化合物质量不得再换算。总养分损失不得无据归于单一物种,土壤残余/留存养分不是排放。保留直接/间接路径台账,不重复所选方法或上游清单已经包含的路径。因子不确定性范围只按其声明基准检查因子,不是最终化合物数量或场址排放的允许界限。用合格参考数量和匹配实测产出,将可归属化合物质量归一化一次。活动量、身份或接收环境未知时保留证据缺口,不得宣称完整。 | cp_fertilizer_and_amendment_records; 物种特定活动量台账、方法路径和因子基准、匹配合格产出 | 按身份区分的交换和对账活动记录 |
数据质量要求
| requirement_id | 适用对象 | Requirement | Evidence |
|---|---|---|---|
quality_reference_identity | 参考流 | 确认门、产品状态、属性、单位和身份状态;时持续披露。 | reference-flow metadata and identity review |
quality_cycle_completeness | 生产周期 | 覆盖所选初植或宿根周期及全部应归属建植/重植记录、匹配产出和跨周期归属。不虚构未代表的其他周期,但不能因事件早于报告期而漏掉有关共享建植负荷。 | crop-cycle register and field records |
quality_input_traceability | 生产投入 | 每项投入关联田块、批次、事件、日期、数量和来源记录。 | invoices, labels, meters, logs |
quality_water_separation | 灌溉和取水 | 确认取水、输送水、泵送能源和消耗结果未重复或错误标注。 | meter reconciliation and source record |
quality_output_mass_balance | 采收和整理 | 核对合格果实、次品、残余物、废水和损失并解释差异。 | scale records and mass-balance worksheet |
quality_factor_and_uncertainty | 排放和外部因子 | 披露方法层级、来源、地理位置、时期、不确定性和敏感性。 | factor register and calculation review |
9. 校验规则
| rule_id | 适用对象 | 规则 | source_ids |
|---|---|---|---|
validation_reference_flow | 参考产品 | 确认一个 1 kg 参考流对应声明门的完整新鲜菠萝,并记录限定信息和身份状态。 | codex-cxs-182-1993 |
validation_cycle_coverage | 过程图 | 确认植株、宿根/再生、重植和作物年度处理明确且未重复计算。 | fao-gap-framework-2003;iso-14044 |
validation_input_completeness | 生产和采收 | 确认繁殖材料、养分、作物保护、水、土地、能源、运输和排放有数值、合理为零或文件化排除。 | fao-gap-framework-2003;ipcc-2019-refinement |
validation_water_and_energy | 灌溉和整理 | 确认取水、输送水、泵送能源、田间燃料和整理电力保持区分并有基准。 | fao-crop-evapotranspiration-56;fao-postharvest-handling-ae075e |
validation_mass_balance | 采收和整理 | 确认投入、合格果实、次品、残余物、废水和损失核对,并为非参考产出声明归宿。 | mass-balance-identity |
validation_allocation_and_disclosure | 共享负荷和产出 | 确认周期分配、多产出处理、门、质量、地理位置、作物年度和敏感性已披露。 | iso-14044;iso-14067 |
10. 发布数据集画像
| 字段 | 值 |
|---|---|
| dataset_role | unit_process |
| downstream_use | secondary_dataset;background_dataset |
| allowed_use | 与声明门、作物周期、地理位置、灌溉状态、质量和时期相匹配的完整新鲜菠萝 LCA 建模 |
| excluded_use | 加工产品;苗圃系统;缺少周期、门、质量、水或产出归宿披露的数据集;边界外下游物流或消费者研究 |
| required_metadata | canonical PCR id;CPC reference;田块或农场范围;品种;植株或宿根/再生周期;作物年度;地理位置;灌溉和水源;养分和作物保护基准;产量;合格和剔除果实;整理状态;门;分配;因子层级;身份证据记录;协议覆盖 |
| required_quality_disclosure | 所代表周期和年份;原始记录覆盖;秤和仪表校准;水处理;质量平衡容差;因子来源和方法;parameterized 和 unmapped 流;排除项;不确定性和敏感性 |
| update_trigger | 周期模型、品种、路线、水源、养分或作物保护实践、产量、整理边界、身份分类、排放方法或代表性时期变化 |
证据适用性:引用的一般农场记录和采后框架不提供作物特定的产量、寿命、交接截止点或 LCA 分配默认值。这些属于本 PCR 的方法选择,应按实际物种、路线和期间限定,取得兼容的农艺证据后才能声称完整。作者暂定范围仅为筛查辅助,不是经验验收限值,也不能替代实测。
11. 数据源
| Source id | Type | Reference | Used for |
|---|---|---|---|
codex-cxs-182-1993 | standard | Codex Alimentarius CXS 182-1993, Standard for Pineapples | 新鲜范围、质量描述和加工排除 |
fao-crop-evapotranspiration-56 | official_guidance | FAO Irrigation and drainage paper 56, Crop evapotranspiration | 灌溉记录和水平衡区分 |
ipcc-2019-refinement | method_factor | 2019 IPCC Refinement to the 2006 IPCC Guidelines | 管理土壤和残余物排放计算 |
emep-eea-2023-guidebook | method_factor | EMEP/EEA air pollutant emission inventory guidebook, agricultural chapters | 农业排放方法选择 |
iso-14044 | standard | ISO 14044, Environmental management — LCA requirements and guidelines | 分配层级、共产品处理和校验 |
iso-14067 | standard | ISO 14067, Greenhouse gases — Carbon footprint of products | 产品边界披露和质量报告 |
mass-balance-identity | method_factor | Conservation of mass applied as a PCR calculation identity | 采收和整理产出核对 |
| source_id | type | reference | used_for |
|---|---|---|---|
declared-handoff-measurement-definition | method_factor | 本 PCR 第 3、6、8 节的净质量归一化定义:同一状态、同一交接门的实测净质量作为自身归一化分母,质量比为 1;交接计量不增加物理工序。 | 同阶段和交接计量恒等式;属于定义,不是实测产率、经验默认值或外部文献。 |
fao-gap-framework-2003 | official_guidance | FAO Committee on Agriculture, COAG/2003/6, Development of a Framework for Good Agricultural Practices, section IV paragraphs 24–26 and Annex, https://www.fao.org/4/y8704e/y8704e.htm | 仅为一般监测和农场记录背景;作物特定路线、寿命、数量范围及 LCA 分配属于 PCR 选择,须补充适用证据。 |
fao-postharvest-handling-ae075e | official_guidance | Kitinoja and Kader, Small-Scale Postharvest Handling Practices: A Manual for Horticultural Crops, 4th edition (2002), FAO-hosted original, https://www.fao.org/4/ae075e/ae075e00.htm | 仅为一般采后处理、冷却和损失记录背景;作物特定参数及本 PCR 截止点和归属须另行证据支持。 |
fao-fertilizer-identities | official_guidance | FAO Fertilizer Specifications, https://www.fao.org/agriculture/crops/thematic-sitemap/theme/spi/plantnutrition/fertspecs/en/ | 条件性具体身份和方法依据;不证明场址使用,也不设定用量 |
fao-organic-nutrients | official_guidance | FAO How to Make and Use Compost, https://www.fao.org/4/i2230e/i2230e.pdf | 条件性具体身份和方法依据;不证明场址使用,也不设定用量 |
route-energy-fao | official_guidance | FAO, Energy-smart food for people and climate (2011), Annex 2; and Energy use in agriculture and industry, Annex IV. https://www.fao.org/4/i2454e/i2454e00.pdf ; https://www.fao.org/4/Q1085e/q1085e0d.htm | 仅支持设备及载能体可能性,适用性由现场记录确定;不采用能耗强度、燃料比例或默认组合。 |
ghg-protocol-product-standard-2011 | standard | WRI/WBCSD, Product Life Cycle Accounting and Reporting Standard (2011), Chapter 9, https://ghgprotocol.org/sites/default/files/standards/Product-Life-Cycle-Accounting-Reporting-Standard_041613.pdf | 一般分配优先顺序及可比交接点经济价值基准。适用条件和明确的剩余分支是本 PCR 的方法约定;该来源不规定本产品因果系数、价格或产出数量。 |
原始下载
以下文件与仓库中该修订的规范化文件逐字节一致,可自行校验哈希。
结构化规则索引
以下索引来自经过校验的 structured.yaml。规则文本保留英文规范源的语言;中文方法学正文见上方。
系统边界规则 · 5
| 规则 ID | 适用对象 | 规则 | 来源 ID |
|---|---|---|---|
boundary_crop_establishment_and_maintenance | field production | Include establishment, soil and field preparation, nutrient and amendment inputs, irrigation, crop protection, field operations, land occupation, and managed-soil emissions through harvest. | fao-gap-framework-2003, ipcc-2019-refinement |
boundary_harvest_and_field_delivery | harvest and field hand-off | Include harvest, collection, internal handling, and transport to the declared farm or field-delivery hand-off when foreground. | fao-gap-framework-2003, fao-postharvest-handling-ae075e |
boundary_primary_conditioning | optional conditioning | Include washing, sorting, trimming, cooling, conditioning energy, wastewater, and culls only when the gate follows them. | codex-cxs-182-1993, fao-postharvest-handling-ae075e |
boundary_downstream_exclusion | downstream conversion and use | Exclude juice, canning, drying, freezing, fermentation, cutting, sweetening, retail, consumer use, and logistics beyond the gate. | codex-cxs-182-1993, iso-14067 |
boundary_input_completeness | all routes | Address propagation material, nutrients, crop protection, water, land, energy, harvest, transport, emissions, output fates, and conditioning inputs with a value, justified zero, or documented exclusion. | fao-gap-framework-2003, ipcc-2019-refinement, mass-balance-identity |
分配规则 · 5
| 规则 ID | 适用对象 | 规则 | 来源 ID |
|---|---|---|---|
allocation_subdivision_priority | crop, harvest, and conditioning | First subdivide plant, ratoon, harvest, field delivery, conditioning, and storage responsibilities when records support separate nodes. | iso-14044, fao-gap-framework-2003 |
allocation_plant_and_ratoon_cycles | shared field and infrastructure burdens | Attribute shared establishment and multi-cycle burdens using declared cycle, duration, and accepted-output bases; disclose sensitivity when incomplete. | iso-14044, fao-gap-framework-2003 |
allocation_fruit_and_nonreference_outputs | accepted fruit, culls, residues, and losses | Record intended outputs, residues, culls, and waste with separate fates. If subdivision is unavailable, use a declared physical or economic method and disclose the alternative. | iso-14044, mass-balance-identity |
allocation_rule_4 | foreground_burden_allocation | Concrete cards do not inherit numerical ranges from the former aggregate card. Determine quantities from original records, stock/meter reconciliation and the declared reference flow; no default quantity or numeric screen is supplied without evidence matching the identity, unit, period and boundary. Missing range evidence is a quality disclosure, not zero use or proof of completeness. | |
allocation_residual_precedence | remaining common burden with no specified primary branch | Resolve any study-specific joint-product instruction in this PCR that has no specified primary branch using this precedence; retain an already explicitly prescribed category-specific primary method. First directly assign separable output-specific activities. For the remaining common burden B, use a physical driver d_i only when measured operation or biological-service records demonstrate the causal consumption represented by that driver. A product being weighable, valuable or lower grade alone is insufficient; do not switch arbitrarily between area, time, mass and revenue. For comparable grades receiving the same common handling, measured processed mass is applicable only with the same service demand, state and moisture basis demonstrated. Share a_i=d_i/sum(d_j); B_i=B*a_i. If no defensible causal physical driver exists for that common operation, use gate- and period-matched economic shares a_i=(q_i*p_i)/sum(q_j*p_j), with the complete independently intended output set, compatible quantity/price units, currency, representative prices and values before output-specific downstream processing. Missing price or denominator evidence makes the allocated result incomplete, not a zero-priced product or a single-output system. Report shares summing to one and sensitivity to a material alternative; an alternative is not an interchangeable primary result. Waste, retained residues and internal transfers receive no co-product share, while their attributable production/handling burdens remain with the producing saleable route. Retain unallocated physical quantities and mass balances separately. This branch gives no automatic substitution credit; any separately scoped substitution analysis retains the gross inventory and its actual displaced-function evidence. | ghg-protocol-product-standard-2011 |
校验规则 · 6
| 规则 ID | 适用对象 | 规则 | 来源 ID |
|---|---|---|---|
validation_reference_flow | reference product | Confirm one 1 kg reference flow uses whole fresh pineapple at the declared gate, with qualifiers and identity status recorded. | codex-cxs-182-1993 |
validation_cycle_coverage | process map | Confirm plant, ratoon, replant, and crop-year treatment is explicit and not double counted. | fao-gap-framework-2003, iso-14044 |
validation_input_completeness | production and harvest | Confirm propagation material, nutrients, crop protection, water, land, energy, transport, and emissions have a value, justified zero, or documented exclusion. | fao-gap-framework-2003, ipcc-2019-refinement |
validation_water_and_energy | irrigation and conditioning | Confirm withdrawal, delivered water, pumping energy, field fuel, and conditioning electricity remain distinct and have a declared basis. | fao-crop-evapotranspiration-56, fao-postharvest-handling-ae075e |
validation_mass_balance | harvest and conditioning | Confirm input, accepted fruit, culls, residues, wastewater, and losses reconcile and each non-reference output has a fate. | mass-balance-identity |
validation_allocation_and_disclosure | shared burdens and outputs | Confirm cycle allocation, multi-output treatment, gate, quality, geography, crop year, and sensitivity are disclosed. | iso-14044, iso-14067 |
过程与输入输出 · 4
| 过程 ID | 过程名称 | 输入流数量 | 输出流数量 |
|---|---|---|---|
pineapple_crop_production | Pineapple Crop Establishment and Maintenance | 11 | 2 |
pineapple_harvest_and_delivery | Pineapple Harvest and Field Delivery | 3 | 2 |
pineapple_primary_conditioning | Pineapple Primary Conditioning and Declared Gate | 3 | 2 |
declared_reference_handoff | Product Measurement at Declared Handoff | 1 | 1 |
完整字段检查器
按需加载该记录的完整 manifest 与结构化投影;字段值不做截断。需要 JavaScript。