Parts and accessories for the goods of subclass 48314

1. Scope and Applicability

This PCR covers finished parts and accessories specifically identifiable for binoculars, monoculars, optical telescopes, non-radio astronomical instruments, and compound optical microscopes. It supports foreground production datasets for mechanical housings, mounts, stages, focusing or alignment mechanisms, structural supports, and other non-optical parts or accessories supplied at the factory gate. The representative route is precision machining of primary aluminium-alloy sheet, cleaning where required, dry assembly, inspection, and packaging.

Complete instruments, radio-astronomy instruments, separately classified lenses, prisms, mirrors and other optical elements, generic fasteners or materials without a documented target-instrument relationship, use, maintenance, and end-of-life are outside this PCR. A producer using another material or manufacturing route shall retain the category identity and reference-flow rules but replace the representative-route inventory with atomic, route-specific foreground exchanges.

2. Product Category Identity

Field	Value
canonical_pcr_id	pcr.metal-products-machinery-and-equipment.medical-appliances-precision-and-optical-instruments-watches-and-clocks.parts-and-accessories-for-the-goods-of-subclass-48314
classification_refs	CPC 3.0: 48351, Parts and accessories for the goods of subclass 48314
covered_products	Finished non-optical parts and accessories specifically designed or documented for binoculars, monoculars, optical telescopes, non-radio astronomical instruments, or compound optical microscopes
excluded_products	Complete CPC 48314 instruments; radio-astronomy instruments; lenses, prisms, mirrors and other separately classified optical elements; generic materials and hardware without a target-instrument relationship
representative_product	A finished, inspected and packaged precision-machined aluminium-alloy mechanical part or accessory for a declared CPC 48314 parent instrument
production_route	Receipt of primary aluminium-alloy sheet; precision machining and finishing; conditional aqueous alkaline cleaning; dry assembly and dimensional or functional inspection; protective packaging
market_state	Saleable finished part or accessory at the manufacturing site gate, including packaging declared by the producer

3. Reference Flow

Field	Value
What	Supply of a mechanical support, positioning, focusing, alignment, enclosure, or mounting function for the declared CPC 48314 parent instrument
How much	1 kg net mass of saleable finished parts or accessories, excluding packaging mass
How well	Conforms to the declared drawing revision, material specification, dimensional tolerances, surface condition, cleanliness requirement, and acceptance test
How long or cycle	One delivered production lot at the factory gate; service life is reported separately and is not part of the mass-based reference amount
reference_flow_link	The reference product output finished_optical_instrument_part normalized to 1 kg net finished-product mass

Field	Value
Reference amount	1 kg net finished-product mass
Reference product flow	Finished optical-instrument part or accessory (Tiangong UUID unresolved)
Reference flow property	Mass 93a60a56-a3c8-11da-a746-0800200b9a66
Reference unit group	Units of mass 93a60a57-a4c8-11da-a746-0800200c9a66
Reference unit	kg
Required qualifiers	part number and drawing revision; parent-instrument type and model; part or accessory function; principal material and grade; manufacturing route; surface treatment and cleanliness state; net product mass; packaging inclusion; site and geography; production period; acceptance criteria and test result

When constructing a foreground data package, every required qualifier shall be declared in dataset metadata, process notes, the reference-flow comment, the product description, or an equivalent data-package field. Missing qualifiers make the reference-flow definition incomplete.

4. Measurement and Unit Rules

rule_id	Applies to	Required property	Required unit	Rule
reference_product_mass	Reference product and accepted output	Mass 93a60a56-a3c8-11da-a746-0800200b9a66	kg	Measure net conforming product mass after final inspection; report packaging separately and normalize all inventory exchanges to 1 kg net finished product.
material_mass_balance	Aluminium input, product, internal transfers, scrap and rejects	Mass or Aluminium content as identified by the selected flow	kg	Use one consistent dry or as-received basis per flow and reconcile input aluminium with aluminium in accepted product, internal work in progress, scrap, rejects and documented losses.
electricity_conversion	Purchased electricity	Net calorific value 93a60a56-a3c8-11da-a746-0800200b9a66	MJ	Preserve meter readings and conversion factors; when source records are in kWh, convert using 1 kWh = 3.6 MJ and do not mix electricity with fuel or purchased heat.
solution_mass	Cutting fluid, process water, sodium hydroxide and spent liquid wastes	Mass 93a60a56-a3c8-11da-a746-0800200b9a66	kg	Record delivered or discharged mass; if volume is measured, retain temperature, density source and concentration used for conversion.

5. System Boundary

rule_id	Applies to	Rule	source_ids
boundary_factory_gate	foreground_system_boundary	Start at receipt of semi-finished material, process chemicals and purchased components; include precision fabrication, applicable cleaning or finishing, assembly, inspection, internal rework and packaging through saleable product at the manufacturing site gate.	us-epa-2003-mpm-development
boundary_upstream_inputs	upstream_datasets	Represent production and delivery of every purchased material, chemical, electricity and packaging flow with a geographically and technologically appropriate upstream dataset; do not absorb these burdens into an unspecified material input.	eu-2021-2279-pef
boundary_conditional_operations	route_specific_operations	Include aqueous cleaning, sodium-hydroxide use, cutting-oil discharge and each packaging material only when records show that the operation or exchange occurred; declare not-applicable rows rather than substituting a combined utility, chemical, waste or packaging label.	ec-jrc-2006-stm-bref; us-epa-2003-mpm-development
boundary_exclusions	excluded_life_cycle_stages	Exclude parent-instrument assembly after the part leaves the site, distribution beyond the factory gate, use, maintenance and end-of-life unless the study explicitly expands the boundary and reports those stages separately.	un-cpc-3-0-structure-2025

Boundary Abstraction

Field	Value
declared_starting_condition	Semi-finished material, process chemicals, purchased components and packaging received at the foreground manufacturing site
starting_condition_role	received_input
product_classification_scope	Finished parts and accessories specifically for the CPC 48314 instruments identified by CPC 3.0 code 48351
recursive_input_rule	A purchased input already within this PCR category is recorded once as a product input with its own upstream dataset and declared completion state; do not recursively reapply this foreground route to that same input.
upstream_dataset_requirement	Each purchased input requires a supplier-specific dataset where available, otherwise a documented regional and technological proxy whose product state and delivery boundary match the received input.
disclosure	Declare material grade, received form, parent-instrument relationship, fabrication route, outsourced operations, cleaning or surface treatment, packaging, geography, production period, recycled-content claims and any expanded life-cycle stages.

6. Process Inventory Structure

Process Map

process_id	process_name	inclusion	inclusion_condition	role	quantitative_reference
precision_fabrication	Precision machining, finishing and cleaning	required	Cleaning exchanges apply only when aqueous alkaline cleaning occurs; the representative route otherwise retains machining exchanges and records cleaning rows as not applicable.	Foreground shaping and surface preparation	Mass of machined and cleaned component transferred to final assembly and inspection
finalization	Assembly, inspection and packaging	required	Assembly records may be zero for a single-piece part; each packaging row applies only when that material is delivered with the product.	Foreground completion, quality acceptance and factory-gate preparation	1 kg net accepted finished product

Process: Precision machining, finishing and cleaning (precision_fabrication)

Inputs

Product flows

Primary aluminium-alloy sheet (primary_aluminium_alloy_sheet)

Primary aluminium-alloy sheet crosses the site boundary as the representative-route workpiece stock. Grade, temper, thickness, supplier and received mass are retained with the batch record.

• Selected flow: Primary aluminum alloy sheet 2a9549cc-dc9e-43a7-9379-7a0c0a0e4832
• Flow property / unit: Mass / kg
• Amount rule: measured sheet mass issued to the production lot minus documented unused sheet returned to controlled stock
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per 1 kg net accepted finished product
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_material_and_packaging
• Sources: us-epa-2003-mpm-development

Purchased electricity for precision fabrication (fabrication_electricity)

Electricity powers machining, finishing, cleaning and directly attributable support equipment in this process. Facility electricity is allocated only under the rules in section 7.

• Selected flow: Electricity 890a70b7-b677-4e2a-8a1b-7d017e0a10ae
• Flow property / unit: Net calorific value / MJ
• Amount rule: measured process electricity plus a documented allocation of shared electricity, converted to MJ
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per 1 kg net accepted finished product
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_energy
• Sources: ec-jrc-2006-stm-bref

Cutting fluid (cutting_fluid)

Cutting fluid is recorded when supplied to machining, including make-up fluid but excluding fluid recovered and reused within the same foreground process loop.

• Selected flow: Cutting Fluid 576d250f-4f36-4385-939d-0f03b8f95a10
• Flow property / unit: Mass / kg
• Amount rule: opening inventory plus purchases and make-up minus closing inventory and unused transfers, net of onsite closed-loop reuse
• Value mode: Calculated value (calculated_value)
• Specificity: Technology-specific (technology_specific)
• Normalization basis: per 1 kg net accepted finished product
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_process_chemicals
• Sources: us-epa-2003-mpm-development

Process water for aqueous cleaning (process_water)

Process water is recorded only when aqueous rinsing or cleaning occurs. Water recirculated within the same process loop is disclosed but is not counted again as a boundary input.

• Selected flow: Process Water 94a04f7e-2d5c-41f0-b182-d54a3b373a02
• Flow property / unit: Mass / kg
• Amount rule: metered or tank-balance make-up water crossing the foreground boundary
• Value mode: Foreground record (foreground_record)
• Specificity: Technology-specific (technology_specific)
• Normalization basis: per 1 kg net accepted finished product; not applicable when no aqueous cleaning occurs
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_water
• Sources: ec-jrc-2006-stm-bref; us-epa-2003-mpm-development

Sodium hydroxide for alkaline cleaning (sodium_hydroxide)

Sodium hydroxide is recorded only when it is added as a discrete alkaline-cleaning chemical. Report purchased solution mass and concentration so active chemical mass can be distinguished from carrier water.

• Selected flow: Sodium hydroxide e0abcced-0611-4c24-9290-5a2c5a0c4169
• Flow property / unit: Mass / kg
• Amount rule: measured sodium-hydroxide product added to the cleaning bath, net of unopened material returned to stock
• Value mode: Foreground record (foreground_record)
• Specificity: Technology-specific (technology_specific)
• Normalization basis: per 1 kg net accepted finished product; not applicable when sodium-hydroxide cleaning is absent
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_process_chemicals
• Sources: ec-jrc-2006-stm-bref; us-epa-2003-mpm-development

Waste flows

Elementary flows

Outputs

Product flows

Machined and cleaned optical-instrument component (machined_cleaned_component_output)

This internal intermediate is the measured component transferred from fabrication to final assembly and inspection. Its foreground flow identity must preserve drawing, material, surface and cleanliness state.

• Selected flow: Machined and cleaned optical-instrument component (Tiangong UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: measured mass released from fabrication to finalization, including pieces later rejected in final inspection
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per production lot and normalized per 1 kg net accepted finished product
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_internal_transfer
• Sources: us-epa-2003-mpm-development

Waste flows

Aluminium-alloy machining chips and swarf (metal_machining_scrap)

Chips and swarf removed from the declared aluminium-alloy stock are recorded at the point they leave controlled onsite reuse. Fluid contamination and recovery destination are reported separately.

• Selected flow: Metal machining scrap beebbc0a-d5fe-44aa-a686-2cf0756973b1
• Flow property / unit: Aluminium content / kg
• Amount rule: measured aluminium content of machining scrap dispatched offsite or transferred to a separately modelled recovery process
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per 1 kg net accepted finished product
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_wastes_and_rejects
• Sources: us-epa-2003-mpm-development

Waste cutting oil (waste_cutting_oil)

Waste cutting oil is recorded only for an oil-based cutting-fluid route when spent oil crosses the process boundary. Aqueous coolant waste requires its own specific flow and is not combined with this row.

• Selected flow: Waste cutting oil 80d926e3-0f76-4a19-9b1e-ffec9deb1216
• Flow property / unit: Mass / kg
• Amount rule: measured spent cutting oil shipped for treatment or recovery, net of oil recovered and returned to the same process
• Value mode: Foreground record (foreground_record)
• Specificity: Technology-specific (technology_specific)
• Normalization basis: per 1 kg net accepted finished product; not applicable when no oil-based cutting fluid is discarded
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_wastes_and_rejects
• Sources: us-epa-2003-mpm-development

Waste alkaline liquor (waste_alkaline_liquor)

Waste alkaline liquor is recorded only when a spent sodium-hydroxide cleaning bath leaves the foreground process. Rinse water and externally neutralized waste are not merged into this flow.

• Selected flow: Waste Alkaline Liquor ce738ef0-a711-4650-a38b-34479efd7559
• Flow property / unit: Mass / kg
• Amount rule: measured mass of spent alkaline bath solution dispatched to onsite treatment or an offsite recipient
• Value mode: Foreground record (foreground_record)
• Specificity: Technology-specific (technology_specific)
• Normalization basis: per 1 kg net accepted finished product; not applicable when no alkaline bath is discharged
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_wastes_and_rejects
• Sources: ec-jrc-2006-stm-bref; us-epa-2003-mpm-development

Elementary flows

Process: Assembly, inspection and packaging (finalization)

Inputs

Product flows

Machined and cleaned optical-instrument component (machined_cleaned_component_input)

This is the same site-specific internal intermediate released by precision_fabrication; quantity and identity shall reconcile exactly between the two processes.

• Selected flow: Machined and cleaned optical-instrument component (Tiangong UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: measured mass received from fabrication, including pieces subsequently rejected
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per production lot and normalized per 1 kg net accepted finished product
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_internal_transfer
• Sources: us-epa-2003-mpm-development

Purchased electricity for assembly and inspection (final_assembly_electricity)

Electricity powers assembly tools, dimensional or functional inspection and directly attributable packaging equipment.

• Selected flow: Electricity 890a70b7-b677-4e2a-8a1b-7d017e0a10ae
• Flow property / unit: Net calorific value / MJ
• Amount rule: measured process electricity plus a documented allocation of shared electricity, converted to MJ
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per 1 kg net accepted finished product
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_energy
• Sources: us-epa-2003-mpm-development

Corrugated-board box (corrugated_board_boxes)

Corrugated-board boxes are recorded when delivered with the saleable product. Their mass is excluded from net reference-product mass and reported as a separate exchange.

• Selected flow: corrugated board boxes 4f197bec-7b3b-11dd-ad8b-0800200c9a66
• Flow property / unit: Mass / kg
• Amount rule: measured box mass issued to accepted product shipments, net of unused boxes returned to stock
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per 1 kg net accepted finished product; not applicable when no corrugated-board box is supplied
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_material_and_packaging
• Sources:

Low-density polyethylene protective film (ldpe_protective_film)

Low-density polyethylene foil is recorded when used as a discrete protective wrap or bag delivered with the product. It is not combined with other plastics or cushioning.

• Selected flow: Low-density polyethylene foil (PE-LD) 2cecd3a7-d90e-44b4-aec5-1d9dfb907477
• Flow property / unit: Mass / kg
• Amount rule: measured PE-LD film mass issued to accepted product shipments, net of unused film returned to stock
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per 1 kg net accepted finished product; not applicable when no PE-LD film is supplied
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_material_and_packaging
• Sources:

Waste flows

Elementary flows

Outputs

Product flows

Finished optical-instrument part or accessory (finished_optical_instrument_part)

This is the conforming, saleable reference product after assembly where applicable, inspection and packaging. The UUID remains unresolved because no exact public state-100 target-category flow was found.

• Selected flow: Finished optical-instrument part or accessory (Tiangong UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: fixed at 1 kg net accepted finished-product mass for the reference flow
• Value mode: Calculated value (calculated_value)
• Specificity: Product-specific (product_specific)
• Normalization basis: 1 kg net accepted finished product
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_finished_output
• Sources:

Waste flows

Rejected optical-instrument part (rejected_optical_instrument_part)

A finished or near-finished target-category part failing documented acceptance criteria is recorded as this discrete waste output when it leaves controlled rework. Material-specific recycling fractions are disclosed separately.

• Selected flow: Rejected optical-instrument part (Tiangong UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: measured rejected-part mass leaving controlled rework, calculated from reject disposition records
• Value mode: Calculated value (calculated_value)
• Specificity: Product-specific (product_specific)
• Normalization basis: per 1 kg net accepted finished product
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_wastes_and_rejects
• Sources: us-epa-2003-mpm-development

Elementary flows

7. Allocation and Co-product Handling

rule_id	Applies to	Rule	source_ids
allocation_avoid	shared_processes	First avoid allocation by subdividing meters, material issues, work orders and waste records to the product lot; use system expansion only when the additional function and expanded result are explicitly reported.	eu-2021-2279-pef
allocation_physical	unavoidable_shared_burdens	When subdivision is not feasible, allocate shared machine electricity by metered operating time or machine time, cleaning burdens by treated surface area or bath loading, and other shared burdens by a documented causal physical relationship; justify and disclose the selected driver.	eu-2021-2279-pef
allocation_scrap	machining_scrap_and_rejects	Report scrap and rejected parts as waste outputs at the point they leave controlled rework; do not subtract an avoided-material credit inside the foreground process unless an explicitly expanded recycling model is supplied and reported separately.	eu-2021-2279-pef

8. Foreground Data Collection, Calculation, and Quality Rules

Data Collection Protocols

protocol_id	process_id	flow_role	record_type	raw_fields	collection_method	unit	frequency	temporal_coverage	site_scope	aggregation_rule	quality_evidence
cp_material_and_packaging	precision_fabrication; finalization	Aluminium stock and discrete packaging inputs	Purchase, receiving, bill-of-material and issue/return records	material identity; grade; supplier; received mass; issued mass; returned mass; packaging component; lot	Reconcile calibrated scale records and inventory transactions to production lots	kg	Each receipt and production lot	At least one representative continuous 12-month period or the full campaign for campaign production	All foreground production and packaging operations at the declared site	Sum net issues by flow and divide by net accepted product mass	Scale calibration, supplier specification, transaction trace and lot reconciliation
cp_energy	precision_fabrication; finalization	Purchased electricity	Submeter, machine controller and facility meter records	meter id; opening and closing reading; unit; timestamp; machine time; allocation driver; conversion factor	Prefer process submetering; otherwise reconcile machine-level records to the facility meter and document allocation	kWh and MJ	Per lot or shift, aggregated monthly	Same period as production output	All directly attributable equipment plus disclosed shared services	Convert kWh to MJ and divide attributable energy by net accepted product mass	Meter calibration or utility invoice reconciliation and allocation worksheet
cp_process_chemicals	precision_fabrication	Cutting fluid and sodium hydroxide	Purchase, batch make-up, replenishment, recovery and inventory records	product identity; formulation; concentration; opening stock; additions; recovery; closing stock	Mass balance each chemical over the production period	kg	Each addition and month-end inventory	Same period as production output	Machining and alkaline-cleaning systems serving the declared product	Net boundary input divided by net accepted product mass	Supplier specification, calibrated scale or delivery record, and signed bath log
cp_water	precision_fabrication	Process water	Submeter or tank-balance records	meter id; readings; make-up; recirculation; discharge; density; timestamp	Meter make-up water or calculate a reconciled tank balance without double-counting recirculation	kg	Per lot or daily, aggregated monthly	Same period as production output	Aqueous cleaning and rinse operations for the declared product	Net make-up water divided by net accepted product mass	Meter calibration, tank-volume check and water-balance reconciliation
cp_internal_transfer	precision_fabrication; finalization	Machined and cleaned component transfer	Traveller, work-order and scale records	part id; drawing revision; material; surface state; cleanliness state; piece count; transfer mass; timestamp	Record release from fabrication and receipt by finalization under the same transfer id	kg	Each transfer lot	Same period as production output	Inter-process transfers within the foreground site	Reconcile output and input transfer mass exactly before normalization	Signed traveller and calibrated scale record
cp_wastes_and_rejects	precision_fabrication; finalization	Machining scrap, spent liquids and rejected parts	Waste container, shipment, treatment and reject-disposition records	waste identity; source operation; gross and tare mass; aluminium content where applicable; contamination; recovery; destination; reject reason	Weigh each dispatched waste or controlled internal treatment transfer and reconcile rejects to inspection records	kg	Each container or shipment and each reject disposition	Same period as production output	All foreground waste and reject points for the declared product	Sum net waste mass by atomic flow and divide by net accepted product mass	Scale calibration, waste manifest, treatment receipt and nonconformance record
cp_finished_output	finalization	Accepted reference product	Final inspection, packing and shipment records	part id; parent instrument; drawing revision; accepted count; net mass; packaging mass; test result; shipment id	Weigh accepted product separately from packaging and link acceptance records to shipment	kg	Each lot and shipment	Same period as inventory inputs	All final inspection and packing stations for the declared product	Sum net accepted mass and use it as the normalization denominator	Calibrated scale, signed inspection report and shipment reconciliation

Calculation Rules

rule_id	Applies to	Formula or rule	Inputs	Output	source_ids
calc_net_material_input	primary_aluminium_alloy_sheet; cutting_fluid; sodium_hydroxide; packaging	Net boundary input = opening stock + receipts + make-up - closing stock - unused material returned outside the lot - material recovered and reused within the same foreground loop.	inventory records; receipts; issue and return records; recovery records	net input mass by atomic flow per kg reference product	us-epa-2003-mpm-development
calc_electricity	fabrication_electricity; final_assembly_electricity	Attributable electricity in MJ = metered kWh × 3.6; where only a shared meter exists, multiply by the disclosed causal allocation share before normalization.	meter readings; machine time or other approved physical driver; net accepted product mass	MJ electricity per kg reference product	eu-2021-2279-pef
calc_scrap_balance	metal_machining_scrap	Reconcile aluminium issued = aluminium in accepted product + aluminium in internal work in progress + aluminium content of scrap + aluminium in rejected parts + quantified residual difference. Investigate and disclose any material residual.	material issues; accepted product; internal transfer; scrap aluminium content; rejects	reconciled aluminium mass balance	us-epa-2003-mpm-development
calc_reference_normalization	all_inventory_rows	Normalized exchange = attributable exchange amount during the period / net mass of accepted finished parts during the same period.	attributable exchange amount; accepted net product mass	exchange per 1 kg net finished product

Data Quality Requirements

requirement_id	Applies to	Requirement	Evidence
dq_identity	Product and every inventory flow	Preserve part number, drawing revision, parent-instrument relationship, material grade, process state, selected Tiangong UUID when confirmed, and explicit unresolved status otherwise.	Drawing, bill of materials, traveller, supplier specification and UUID audit
dq_temporal	All foreground records	Inputs, outputs and allocation drivers shall cover the same representative period; explain shutdowns, prototypes, abnormal rework and campaign boundaries.	Period reconciliation and production log
dq_completeness	Material, energy, water, chemicals, wastes and rejects	Reconcile purchase, inventory, meter, production and waste records; do not replace missing atomic exchanges with umbrella labels.	Mass, energy and record-completeness checks
dq_measurement	Mass, electricity and liquid conversions	Retain calibration status, original unit, conversion factor, density and concentration where applicable, and the person or system responsible for the record.	Calibration certificates, meter records and conversion worksheet
dq_technology_geography	Upstream datasets and foreground route	Match product state, material grade, electricity geography, supplier route and treatment destination; document each proxy and its effect on representativeness.	Supplier dataset, geography and technology comparison
dq_source_traceability	External rules and source-based process choices	Retain the exact source title, stable locator, retrieval date and the rule or process choice supported; do not treat search snippets as final evidence.	Source register and archived original document reference

9. Validation Rules

rule_id	Applies to	Rule	source_ids
validate_identity	reference_product	Fail if the dataset does not identify the finished part or accessory, its CPC 48314 parent instrument, drawing revision, function, material, completion state and net reference mass, or if it substitutes a complete instrument or separately classified optical element.	un-cpc-3-0-structure-2025
validate_inventory_atomicity	process_inventory	Fail if electricity is combined with fuels or heat, chemicals are combined, packaging materials are combined, wastes are combined, or a row is a selector rather than one physical exchange.
validate_internal_transfer	machined_cleaned_component_output; machined_cleaned_component_input	Fail unless the internal intermediate has the same identity and reconciled mass at release and receipt, subject only to a separately recorded and explained loss.
validate_mass_balance	aluminium_and_output_balance	Fail if aluminium input, accepted output, machining scrap, rejected parts, work in progress and quantified residual are not reconciled for the same period.	us-epa-2003-mpm-development
validate_energy	electricity	Fail if kWh-to-MJ conversion, meter scope, shared-energy allocation or double counting between the two foreground processes is absent or inconsistent.	eu-2021-2279-pef
validate_conditionals	cleaning_wastes_and_packaging	Fail if a conditional row has a positive amount without evidence that the operation or material occurred, or is omitted without an explicit not-applicable declaration.	ec-jrc-2006-stm-bref; us-epa-2003-mpm-development
validate_uuid_and_sources	identity_and_evidence	Fail if an unresolved UUID is presented as confirmed, if a UUID-bearing Chinese selected-flow name differs from the direct-read TianGong Chinese baseName, or if a source-backed rule cannot be traced to verified original text.

10. Published Dataset Profile

Field	Value
dataset_role	Foreground production dataset for finished CPC 48351 parts and accessories at the manufacturing site gate
downstream_use	secondary_dataset; background_dataset after independent review and replacement or acceptance of unresolved identities and range evidence needs
allowed_use	Product carbon footprint and LCA modelling of a declared finished optical-instrument part or accessory when material, route, parent instrument, geography, period, allocation and packaging are representative
excluded_use	Complete instruments; optical elements; radio-astronomy equipment; generic metal parts without a parent-instrument relationship; use-stage performance or end-of-life without explicit boundary expansion
required_metadata	PCR id and version; part number and drawing revision; parent-instrument type and model; function; principal material and grade; site and geography; production period; route and outsourced operations; surface and cleanliness state; net product mass; packaging; electricity mix; allocation; waste destinations; UUID status
required_quality_disclosure	Foreground-versus-proxy share, data age, meter and scale coverage, allocation drivers, mass-balance residual, reject and rework treatment, density and concentration conversions, unresolved UUIDs, missing range evidence and source verification status
update_trigger	Change in part design or material, manufacturing or cleaning route, site, electricity supply, packaging, allocation driver, waste destination, acceptance criteria, representative period, or resolution of a UUID or evidence need

11. Data Sources

Source id	Type	Reference	Used for
un-cpc-3-0-structure-2025	Official guidance (official_guidance)	United Nations Statistics Division, Central Product Classification Version 3.0 structure, 30 June 2025, https://unstats.un.org/unsd/classifications/Econ/Download/In%20Text/CPC_Ver_3.0_Structure_30Jun2025.csv (retrieved 2026-09-07)	CPC 48351 identity, its relationship to CPC 48314, and exclusions of complete parent instruments from the parts reference product
us-epa-2003-mpm-development	Official guidance (official_guidance)	U.S. EPA, Development Document for the Final Effluent Limitations Guidelines and Standards for the Metal Products & Machinery Point Source Category, EPA-821-B-03-001, February 2003, https://www.epa.gov/sites/default/files/2015-11/documents/mp-m_dd_2003.pdf (retrieved 2026-09-07)	Machining, cleaning, assembly and testing process decomposition; cutting-fluid, chip, spent-fluid and rinse-water record requirements
ec-jrc-2006-stm-bref	Official guidance (official_guidance)	European Commission Joint Research Centre, Reference Document on Best Available Techniques for the Surface Treatment of Metals and Plastics, August 2006, https://bureau-industrial-transformation.jrc.ec.europa.eu/sites/default/files/2019-11/stm_bref_0806.pdf (retrieved 2026-09-07)	Conditional surface preparation and treatment; separate water, electricity, acid, alkali, rinse and spent-solution tracking
eu-2021-2279-pef	Official guidance (official_guidance)	Commission Recommendation (EU) 2021/2279, Annex I Product Environmental Footprint Method, consolidated 30 December 2021, https://eur-lex.europa.eu/eli/reco/2021/2279/2021-12-30/eng (retrieved 2026-09-07)	Upstream dataset completeness, allocation hierarchy, subdivision, physical allocation and recycling disclosure