Blankets and travelling rugs (except electric blankets)

1. Scope and Applicability

This PCR applies to the gate-to-gate manufacture of non-electric blankets and travelling rugs classified to CPC 3.0 subclass 27110. It covers products made from woven, knitted, non-woven, pile, fleece, quilted, or felted textile constructions when they are supplied as blankets or travelling rugs for warmth or covering.

Electric blankets and any product incorporating an electrical device or electrical circuit are excluded. Textile floor coverings, sleeping bags, bed linen, quilts whose primary classification is not CPC 27110, and upstream fibre, yarn, and fabric manufacture are outside this category unless explicitly added to the declared study boundary. The producing data package must identify fibre composition, construction, finishing route, dimensions, mass, and market state so a consumer can judge representativeness. un-stats-cpc-3-2025 supports the classification boundary; eu-ecolabel-textiles-2014 supports the exclusion of electrical textile products and the disclosure of fibre and component composition.

2. Product Category Identity

Field	Value
canonical_pcr_id	pcr.food-products-beverages-and-tobacco-textiles-apparel-and-leather-products.textile-articles-other-than-apparel.blankets-and-travelling-rugs-except-electric-blankets
classification_refs	CPC 3.0: 27110 — Blankets and travelling rugs (except electric blankets)
covered_products	non-electric blankets and travelling rugs made from textile materials, including pile, fleece, woven, knitted, non-woven, felted, or quilted constructions
excluded_products	electric blankets; textile floor coverings; sleeping bags; bed linen; upstream fibres, yarns, and fabrics sold as intermediates; products classified outside CPC 27110
representative_product	one finished, saleable non-electric blanket at the factory gate
production_route	receipt and conditioning of ready-to-make textile material; cutting and make-up; conditional wet finishing and drying; inspection, folding, labelling, and packaging
market_state	finished, dry, quality-released, packaged or otherwise saleable at the manufacturing gate

3. Reference Flow

Field	Value
What	provide a finished non-electric textile blanket or travelling rug for warmth or covering
How much	1 kg net mass of finished saleable product
How well	conforms to the declared fibre composition, construction, dimensions, mass per item, finishing route, and applicable fitness-for-use specification
How long or cycle	factory-gate product; service life is not asserted by this mass-based production reference
reference_flow_link	the reference amount is the dry net mass of the quality-released product before optional transport packaging

Field	Value
Reference amount	1 kg
Reference product flow	Blanket b7478885-d1a2-4ced-9240-4737fc0b8020
Reference flow property	Mass 93a60a56-a3c8-11da-a746-0800200b9a66
Reference unit group	Units of mass 93a60a57-a4c8-11da-a746-0800200c9a66
Reference unit	kg
Required qualifiers	fibre composition by mass; textile construction; finishing route and applied functional finishes; finished dimensions; mass per item; moisture-conditioning basis; packaging state; production geography and reference year

When constructing a foreground data package, the items listed in Required qualifiers must be declared in dataset metadata, process notes, reference flow comment, product description, or an equivalent data package field. Missing required qualifiers make the reference flow definition incomplete for that data package.

4. Measurement and Unit Rules

rule_id	Applies to	Required property	Required unit	Rule
reference_mass	reference product and all mass-normalized exchanges	Mass 93a60a56-a3c8-11da-a746-0800200b9a66	kg	Use dry net mass of quality-released blankets; exclude removable transport packaging from the reference product mass and report its mass in separate packaging exchanges.
item_to_mass	records kept as blanket count	Mass 93a60a56-a3c8-11da-a746-0800200b9a66	kg	Convert count to mass with measured net mass by product SKU and production lot; retain count, sampled item masses, sampling plan, and conversion calculation.
moisture_basis	received textile and finished product	Mass 93a60a56-a3c8-11da-a746-0800200b9a66	kg	Record the conditioning method and moisture basis; do not mix wet-process mass with conditioned finished mass without a documented conversion.
energy_preservation	electricity and thermal energy	declared energy property	kWh or MJ	Preserve the meter unit and conversion factor; do not represent electricity, steam, and natural gas as one combined exchange.

5. System Boundary

Boundary Abstraction

Field	Value
declared_starting_condition	ready-to-make blanket body textile and auxiliary materials received at the blanket manufacturing site
starting_condition_role	foreground gate-to-gate starting condition; upstream fibre, yarn, fabric formation, dyeing, and finishing burdens remain in linked supplier datasets unless performed on site
product_classification_scope	CPC 3.0 subclass 27110 only; electrical products and other made-up textile categories are excluded
recursive_input_rule	a purchased blanket or travelling rug already in CPC 27110 is an upstream product input and must use a separately declared supplier dataset; it must not be re-created recursively inside this foreground process
upstream_dataset_requirement	link each received textile, thread, chemical, fuel, water, electricity, and packaging material to a representative upstream dataset with geography, technology, and reference year disclosed
disclosure	declare which cutting, sewing, brushing/raising, washing, finishing, drying, inspection, and packaging operations are on site or outsourced, and identify any omitted operation with justification

rule_id	Applies to	Rule	source_ids
boundary_required_operations	foreground blanket manufacture	Include receipt/conditioning, cutting and make-up, inspection, reference-product output, and packaging exchanges; include washing, dyeing, printing, finishing, drying, direct heating, and wastewater treatment whenever performed for the declared product.	jrc-textiles-bref-2023; eu-textiles-bat-2022
boundary_input_output_inventory	each included process	Maintain an operation-specific inventory of material, chemical, water, energy, product, waste, wastewater, and direct elementary exchanges; do not hide wet processing or on-site combustion in a generic utility total.	eu-textiles-bat-2022; ifc-textile-ehs-2007
boundary_outsourcing	outsourced operations	Disclose outsourced operations and link their datasets; an outsourced operation is not a valid cut-off solely because it occurs off site.	iso-14044-2006

6. Process Inventory Structure

Process Map

process_id	process_name	inclusion	inclusion_condition	role	quantitative_reference
material_receipt_conditioning	Material receipt and conditioning	required	always	foreground material preparation	kg conditioned blanket body textile released to cutting
cutting_makeup	Cutting and make-up	required	always	foreground product assembly	kg unfinished blanket output
wet_finishing_drying	Wet finishing and drying	conditional	include when washing, dyeing, printing, softening, functional finishing, rinsing, or drying is performed for the product	foreground wet processing and conditioning	kg dry finished blanket intermediate
onsite_heat_generation	On-site natural-gas heat generation	conditional	include when natural gas is combusted on site for direct or indirect process heat	foreground energy conversion and direct emissions	MJ gross calorific value of natural gas consumed
inspection_packaging	Inspection and packaging	required	always	foreground quality release and packing	1 kg net finished blanket output

Process: Material receipt and conditioning (material_receipt_conditioning)

Inputs

Product flows

Ready-to-make blanket body textile (blanket_body_textile_input)

Record the specific received textile that becomes the blanket body, including fibre composition, construction, finish, supplier lot, and conditioned mass. Its UUID remains unresolved because generic fabric records do not preserve these qualifiers.

• Selected flow: Ready-to-make blanket body textile
• Flow property / unit: Mass / kg
• Amount rule: weigh or reconcile supplier-certified conditioned textile mass received for the declared product lots
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg conditioned blanket body textile released to cutting
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_material_mass_balance
• Sources: eu-ecolabel-textiles-2014

Waste flows

Elementary flows

Outputs

Product flows

Conditioned blanket body textile (conditioned_blanket_body_output)

This intermediate is the measured textile released after quarantine, identification, and conditioning; it is distinct from generic fabric and therefore remains UUID-unresolved.

• Selected flow: Conditioned blanket body textile
• Flow property / unit: Mass / kg
• Amount rule: measured conditioned mass released to cutting
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg conditioned blanket body textile released to cutting
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_material_mass_balance
• Sources:

Waste flows

Elementary flows

Process: Cutting and make-up (cutting_makeup)

Inputs

Product flows

Conditioned blanket body textile (conditioned_blanket_body_input)

Record the conditioned material issued to cutting by product lot; the unresolved UUID must match the output identity declared by the preceding process.

• Selected flow: Conditioned blanket body textile
• Flow property / unit: Mass / kg
• Amount rule: measured conditioned textile issued to cutting
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg unfinished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_cutting_mass_balance
• Sources:

Sewing thread (sewing_thread_input)

Record each actual sewing-thread material and linear-density specification separately in the foreground package; this card represents the single sewing-thread exchange used for the declared product.

• Selected flow: Sewing thread
• Flow property / unit: Mass / kg
• Amount rule: weigh issued thread less returned usable thread, or convert verified length by supplier linear density
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg unfinished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_cutting_mass_balance
• Sources:

Purchased electricity for cutting and sewing (purchased_electricity_cutting)

Record metered purchased electricity for cutting, sewing, trimming, and local extraction. The UUID is unresolved until voltage level and supply geography are matched to one compatible public flow.

• Selected flow: Purchased grid electricity, medium voltage
• Flow property / unit: Energy / kWh
• Amount rule: submetered electricity; otherwise reconciled site-meter electricity allocated by documented machine runtime and rated load
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per kg unfinished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_energy_records
• Sources: eu-textiles-bat-2022

Waste flows

Elementary flows

Outputs

Product flows

Unfinished assembled blanket (unfinished_blanket_output)

Record the mass of assembled blanket output before any declared wet finishing and final packaging; no exact public intermediate identity was verified.

• Selected flow: Unfinished assembled blanket
• Flow property / unit: Mass / kg
• Amount rule: measured accepted output from cutting and make-up
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg unfinished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_cutting_mass_balance
• Sources:

Waste flows

Textile cutting offcuts (textile_cutting_offcuts)

Record separately weighed blanket-body offcuts leaving cutting as a waste flow; reusable components returned to production are internal loops, not waste outputs.

• Selected flow: Waste fiber fabric cd3a2b81-3287-457e-9501-2a39f59cec99
• Flow property / unit: Mass / kg
• Amount rule: measured offcut mass by lot and destination
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg unfinished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_cutting_mass_balance
• Sources:

Elementary flows

Process: Wet finishing and drying (wet_finishing_drying)

Inputs

Product flows

Unfinished assembled blanket (unfinished_blanket_input)

Record the unfinished blanket entering the specific wet-finishing route; the intermediate UUID remains unresolved.

• Selected flow: Unfinished assembled blanket
• Flow property / unit: Mass / kg
• Amount rule: measured dry mass charged to the wet-finishing route
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg dry wet-finished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_wet_process_batch
• Sources: jrc-textiles-bref-2023

Process water (process_water_input)

Record water entering washing, preparation, finishing, and rinsing from meters or batch recipes, without merging it with wastewater output.

• Selected flow: Process Water 94a04f7e-2d5c-41f0-b182-d54a3b373a02
• Flow property / unit: Mass / kg
• Amount rule: metered or tank-volume water charged to included wet operations
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per kg dry wet-finished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_wet_process_batch
• Sources: eu-textiles-bat-2022; ifc-textile-ehs-2007

Liquid detergent (liquid_detergent_input)

Record the formulated liquid detergent charged to the blanket washing operation; other chemicals must be added as separate atomic exchanges.

• Selected flow: Liquid Detergent c1214ed0-28a4-4273-a8c9-a4f29351747a
• Flow property / unit: Mass / kg
• Amount rule: batch issue or dosing-system mass for the declared product lots
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg dry wet-finished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_chemical_dosing
• Sources: eu-ecolabel-textiles-2014; eu-textiles-bat-2022

Textile finishing agent (textile_finishing_agent_input)

Record the single formulated finishing agent used for the declared blanket route, with product name, function, composition disclosure, and batch dose; additional agents require additional cards in the foreground package.

• Selected flow: Textile finishing agent 2289d57c-b3aa-4288-a69c-c0f7aa016702
• Flow property / unit: Mass / kg
• Amount rule: batch issue or calibrated dosing-system mass
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg dry wet-finished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_chemical_dosing
• Sources: eu-ecolabel-textiles-2014; eu-textiles-bat-2022

Purchased steam (purchased_steam_input)

Record purchased steam crossing the site boundary for wet processing or drying; exclude steam generated inside the separately modelled on-site heat process.

• Selected flow: Steam 293f9fd9-5182-4d35-8aa5-ce73d4f322b7
• Flow property / unit: Mass / kg
• Amount rule: metered steam mass supplied to the included wet-finishing and drying operations
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per kg dry wet-finished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_energy_records
• Sources: eu-textiles-bat-2022

Waste flows

Elementary flows

Outputs

Product flows

Wet-finished blanket (wet_finished_blanket_output)

Record the dry, conditioned blanket leaving the declared wet-finishing route; the UUID remains unresolved until an exact intermediate record exists.

• Selected flow: Wet-finished blanket
• Flow property / unit: Mass / kg
• Amount rule: measured dry conditioned output accepted for inspection
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg dry wet-finished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_wet_process_batch
• Sources:

Waste flows

Textile process wastewater (textile_process_wastewater)

Record wastewater transferred to on-site or off-site treatment, preserving the discharge/treatment route and the batch or meter link.

• Selected flow: Wastewater, textile process (to water) 48438fa9-4988-405c-ba44-646f134e2ecc
• Flow property / unit: Mass / kg
• Amount rule: measured wastewater mass or measured volume converted with documented density
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per kg dry wet-finished blanket output
• Basis kind: Process output (process_output)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_wastewater_records
• Sources: jrc-textiles-bref-2023; eu-textiles-bat-2022; ifc-textile-ehs-2007

Elementary flows

Process: On-site natural-gas heat generation (onsite_heat_generation)

Inputs

Product flows

Natural gas combusted on site (natural_gas_input)

Record natural gas consumed for direct or indirect process heat from calibrated fuel meters or reconciled invoices; do not combine it with purchased steam.

• Selected flow: Natural gas 4bfd1abb-9106-495a-a291-ce410f205691
• Flow property / unit: Gross calorific value / MJ
• Amount rule: metered gas quantity converted with the supplier gross calorific value for the reporting period
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per MJ gross calorific value natural gas consumed
• Basis kind: Fuel inventory (fuel_inventory)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_fuel_combustion
• Sources: eu-textiles-bat-2022

Waste flows

Elementary flows

Outputs

Product flows

Waste flows

Elementary flows

Fossil carbon dioxide to air (fossil_co2_to_air)

Record direct fossil carbon dioxide from the same natural-gas inventory using a measured stack result or an explicitly documented accepted combustion-factor calculation.

• Selected flow: carbon dioxide (fossil), emissions to air unspecified 08a91e70-3ddc-11dd-923d-0050c2490048
• Flow property / unit: Mass / kg
• Amount rule: measured emission or calculated from metered fuel and a documented accepted factor
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per MJ gross calorific value natural gas consumed
• Basis kind: Fuel inventory (fuel_inventory)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_fuel_combustion
• Sources: eu-textiles-bat-2022

Process: Inspection and packaging (inspection_packaging)

Inputs

Product flows

Finished blanket before packaging (wet_finished_blanket_input)

Record the dry blanket released to final inspection; for routes without wet finishing this is the accepted unfinished blanket after any dry finishing.

• Selected flow: Wet-finished blanket
• Flow property / unit: Mass / kg
• Amount rule: measured net mass entering final inspection
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg net finished blanket output
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_packaging_release
• Sources:

Purchased electricity for inspection and packaging (purchased_electricity_packaging)

Record electricity for inspection, folding, labelling, sealing, and packing; the UUID remains unresolved until voltage and geography are exact.

• Selected flow: Purchased grid electricity, medium voltage
• Flow property / unit: Energy / kWh
• Amount rule: submetered electricity; otherwise reconciled site-meter electricity allocated by documented runtime and load
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per kg net finished blanket output
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_energy_records
• Sources: eu-textiles-bat-2022

Corrugated board box (corrugated_box_input)

Record the mass of corrugated board boxes consumed for the declared saleable packaging configuration.

• Selected flow: corrugated board boxes 4f197bec-7b3b-11dd-ad8b-0800200c9a66
• Flow property / unit: Mass / kg
• Amount rule: issued packaging mass less unused returns, reconciled to packed units
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg net finished blanket output
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_packaging_release
• Sources:

Polyethylene packaging film (polyethylene_packaging_film)

Record the single polyethylene film exchange used for bags, sleeves, or wrapping; its UUID is withheld because the retrieved candidate had a non-packaging CPC identity.

• Selected flow: Polyethylene packaging film
• Flow property / unit: Mass / kg
• Amount rule: issued film mass less unused returns, reconciled to packed units
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg net finished blanket output
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_packaging_release
• Sources:

Paper packaging label (paper_label_input)

Record paper labels attached to or packed with the declared product, converting label count with verified supplier mass when necessary.

• Selected flow: Packaging label, paper d5890643-6859-42b5-9e05-556b072c6a8c
• Flow property / unit: Mass / kg
• Amount rule: issued label count multiplied by verified mass per label, less unused returns
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: per kg net finished blanket output
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_packaging_release
• Sources:

Waste flows

Elementary flows

Outputs

Product flows

Quality-released blanket (reference_blanket_output)

This is the declared reference product after final inspection, at dry net mass and with its packaging state separately disclosed.

• Selected flow: Blanket b7478885-d1a2-4ced-9240-4737fc0b8020
• Flow property / unit: Mass / kg
• Amount rule: measured dry net mass of quality-released blanket output
• Value mode: Foreground record (foreground_record)
• Specificity: Product-specific (product_specific)
• Normalization basis: 1 kg net finished blanket output
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_packaging_release
• Sources: un-stats-cpc-3-2025

Waste flows

Elementary flows

7. Allocation and Co-product Handling

rule_id	Applies to	Rule	source_ids
allocation_avoid	all shared foreground operations	First avoid allocation by submetering, batch segregation, line-level mass balances, and subdivision of independently operated processes.	iso-14044-2006
allocation_causal	shared utilities and common services	Where subdivision is not practicable, allocate with a documented physical causal driver such as machine runtime and load, steam demand, water meter, processed mass, or occupied batch capacity.	iso-14044-2006
allocation_multi_product	facilities producing several blanket SKUs or other textile products	Do not use revenue allocation unless a physical relationship cannot be established and the study explicitly justifies the alternative; disclose the allocation base, totals, assigned amounts, and sensitivity.	iso-14044-2006
allocation_recycling	offcuts, rejects, recovered chemicals, and reusable packaging	Record the actual destination and keep internal reuse as an internal loop; do not credit recycling, reuse, or avoided production without an explicitly declared downstream modelling convention.	iso-14044-2006

8. Foreground Data Collection, Calculation, and Quality Rules

Data Collection Protocols

protocol_id	process_id	flow_role	record_type	raw_fields	collection_method	unit	frequency	temporal_coverage	site_scope	aggregation_rule	quality_evidence
cp_material_mass_balance	material_receipt_conditioning	received and conditioned textile mass	weighbridge, scale, receipt, and lot release records	material identity, fibre composition, construction, supplier lot, gross mass, tare, conditioned mass, moisture basis, release status	calibrated weighing and lot reconciliation	kg	each receipt and release lot	representative reporting year	all supplying stores and conditioning areas serving the product	sum accepted lot mass and reconcile opening stock plus receipts minus issues and closing stock	scale calibration, supplier specification, lot traceability, stock reconciliation
cp_cutting_mass_balance	cutting_makeup	textile, thread, output, and offcut mass	issue, return, scale, and production records	SKU, lot, issued textile, returned textile, thread issue/return, accepted output, offcuts, rejects	calibrated weighing; verified thread length-to-mass conversion only where weighing is impracticable	kg	each production lot	representative reporting year	all cutting and make-up lines	reconcile material inputs with accepted output, offcuts, rejects, and inventory change	scale calibration, batch reconciliation, exception log
cp_wet_process_batch	wet_finishing_drying	blanket and process-water balance	batch sheet, water meter, tank level, and conditioned mass records	route, batch, textile charge, water meter start/end, tank volume, dry output, moisture basis	batch-linked meters and calibrated weighing	kg	each wet-process batch	representative reporting year	all included wet-finishing and drying equipment	sum batch records and normalize by accepted dry output	meter calibration, recipe version, mass/water reconciliation
cp_chemical_dosing	wet_finishing_drying	detergent and finishing-agent dose	recipe, issue, return, and dosing-system records	product name, supplier, function, composition/SDS reference, batch, dose, returned quantity	calibrated dosing system or issue-minus-return weighing	kg	each batch	representative reporting year	all chemical preparation and dosing points	sum net dose by named chemical and product route	calibration, approved recipe, purchase/stock reconciliation, SDS
cp_wastewater_records	wet_finishing_drying	wastewater to treatment	flow meter, batch discharge, treatment transfer, and sampling records	route, volume or mass, density if converted, destination, sampling time, monitored parameters	continuous meter or batch tank measurement linked to discharge route	kg	each batch or continuous meter interval	representative reporting year	all included wet-process discharges	sum by treatment destination; convert volume only with documented density	meter calibration, sample chain of custody, influent/effluent reconciliation
cp_energy_records	cutting_makeup	purchased electricity and steam	utility meters, invoices, runtime, and load records	meter start/end, carrier, voltage or steam condition, runtime, load, allocation driver, product output	submeter; otherwise reconciled site meter with documented causal allocation	kWh or kg	meter interval and monthly reconciliation	representative reporting year	all included equipment and utility headers	sum direct readings; allocate documented shared remainder and reconcile to invoice/site meter	meter calibration, invoice reconciliation, allocation worksheet
cp_fuel_combustion	onsite_heat_generation	natural gas and direct fossil CO2	fuel meter, supplier calorific value, stack measurement, and calculation record	gas quantity, unit, gross calorific value, meter period, equipment, operating hours, measured emission or factor identity	calibrated fuel meter plus stack result or documented accepted factor calculation	MJ and kg	meter interval and reporting period	representative reporting year	all on-site combustion serving included operations	convert each period to MJ GCV and link emissions to the same fuel inventory	meter calibration, supplier certificate, stack report or factor provenance, reconciliation
cp_packaging_release	inspection_packaging	packaging inputs and reference output	packaging issue/return, label count, scale, inspection, and release records	SKU, lot, blanket count, net product mass, box mass, film mass, label count/mass, rejected units, packaging state	calibrated weighing plus count-to-mass conversion from verified component mass	kg	each packing lot	representative reporting year	all inspection and packing lines	reconcile net released product and each packaging material separately	scale calibration, component specification, release record, packaging reconciliation

Calculation Rules

rule_id	Applies to	Formula or rule	Inputs	Output	source_ids
calc_normalize_reference	all inventory exchanges	normalized exchange = total exchange assigned to conforming product / dry net kg of quality-released blanket	assigned exchange; dry net released product mass	exchange per kg reference product	iso-14044-2006
calc_item_mass	count-based product or label records	mass = verified count multiplied by representative measured mass per item from the same SKU and applicable lot or sampling period	item count; measured item masses; sampling record	kg	iso-14048-2002
calc_water_volume_mass	water and wastewater records	mass = measured volume multiplied by documented density at the applicable condition; retain original volume	volume; density; temperature or declared condition	kg	iso-14048-2002
calc_natural_gas_energy	natural gas input	energy = metered gas quantity multiplied by supplier gross calorific value for the same reporting period	gas quantity; gross calorific value	MJ GCV	eu-textiles-bat-2022
calc_mass_balance	material and wet-process batches	reconcile inputs = accepted outputs + wastes + emissions/transfers + inventory change; investigate and disclose unresolved imbalance	measured inputs; outputs; wastes; transfers; inventory change	batch balance and unexplained difference	eu-textiles-bat-2022; iso-14044-2006

Data Quality Requirements

requirement_id	Applies to	Requirement	Evidence
dq_identity	reference product and intermediates	Preserve product SKU, fibre composition, construction, finishing route, dimensions, mass per item, moisture basis, and lot through all process records.	product specification, bill of materials, lot traveller, release certificate
dq_temporal	all foreground records	Use a representative continuous 12-month period where practicable; disclose shutdowns, start-ups, campaigns, and substitutions that affect representativeness.	dated meter series, production calendar, exception log
dq_completeness	each process	Reconcile materials, water, chemicals, energy, products, waste, wastewater, and direct emissions; document every missing stream and estimation.	signed mass/energy reconciliation and completeness checklist
dq_measurement	measured exchanges	Identify meter/scale, unit, calibration status, reading interval, and conversion factor; preserve source records and calculation lineage.	calibration certificate, raw reading, invoice, calculation worksheet
dq_supplier	upstream inputs	Record supplier, production geography, technology/route, reference year, and dataset match for significant textile, chemical, energy, and packaging inputs.	supplier declaration, SDS, certificate, linked dataset metadata
dq_chemical	wet finishing chemicals	Keep product identity, function, composition or SDS reference, batch dose, and applicable restricted-substance or substitution assessment.	approved recipe, SDS, purchase and dosing record, compliance declaration

9. Validation Rules

rule_id	Applies to	Rule	source_ids
validate_reference_identity	reference flow	Require flow UUID b7478885-d1a2-4ced-9240-4737fc0b8020, public state 100 Product flow evidence, exact CPC 27110 scope, Mass UUID 93a60a56-a3c8-11da-a746-0800200b9a66, Units of mass UUID 93a60a57-a4c8-11da-a746-0800200c9a66, and kg.	un-stats-cpc-3-2025
validate_required_qualifiers	reference product metadata	Fail completeness when any required qualifier is missing or when the product contains an electrical device or circuit.	eu-ecolabel-textiles-2014
validate_atomic_inventory	process inventory	Require each inventory card to represent one exchange, retain only a directly verified UUID, and preserve an explicit unresolved reason for every UUID-free row.	iso-14048-2002
validate_process_route	process boundary	Require all required processes and every applicable conditional operation; reconcile outsourced operations to linked datasets.	jrc-textiles-bref-2023; eu-textiles-bat-2022
validate_foreground_values	inventory amounts	Require every published amount to originate from a foreground record or an identified calculation over foreground records; this candidate PCR supplies no AI-authored numerical ranges or defaults.	iso-14044-2006; iso-14048-2002
validate_mass_balance	each production stage and reporting period	Require documented reconciliation of material inputs, accepted outputs, wastes, transfers, and inventory change, with investigated and disclosed residuals.	eu-textiles-bat-2022; iso-14044-2006
validate_allocation	shared operations	Require subdivision or a documented causal physical allocation driver, complete totals, assigned quantities, and sensitivity where allocation materially affects results.	iso-14044-2006
validate_source_traceability	data package	Require raw-record lineage, calibration/quality evidence, source ids for normative rules, and linked upstream dataset metadata.	iso-14048-2002

10. Published Dataset Profile

Field	Value
dataset_role	foreground blanket-manufacturing dataset eligible for secondary_dataset or background_dataset use after review and publication
downstream_use	construction of product process datasets and downstream lifecyclemodel systems for non-electric blankets or travelling rugs matching the declared qualifiers
allowed_use	gate-to-gate blanket manufacturing, or a linked manufacturing stage in a broader cradle-to-gate or cradle-to-grave model, when product, geography, technology, and time are representative
excluded_use	electric blankets; floor coverings; sleeping bags; upstream textile production; use-phase service claims; products with materially different construction or finishing routes without adaptation
required_metadata	canonical PCR id; CPC 27110; reference UUID/property/unit group; required qualifiers; process inclusions; geography; reference year; technology; allocation; data sources; unresolved identities; packaging state
required_quality_disclosure	primary-data share; meter and scale coverage; calibration status; temporal coverage; supplier-data coverage; mass-balance residuals; allocation shares; missing or estimated exchanges; outsourced operation coverage
update_trigger	change in fibre composition, construction, finishing chemistry or route, energy system, wastewater treatment, packaging configuration, production geography, supplier dataset, reference-flow identity, or a material data-quality finding

11. Data Sources

Source id	Type	Reference	Used for
un-stats-cpc-3-2025	Official guidance (official_guidance)	United Nations Statistics Division, Central Product Classification Version 3.0 structure, subclass 27110, official structure dated 30 June 2025, https://unstats.un.org/unsd/classifications/Econ/Download/In%20Text/CPC_Ver_3.0_Structure_30Jun2025.csv (retrieved 2026-08-12)	official product-category title and scope anchor
jrc-textiles-bref-2023	Official guidance (official_guidance)	European Commission Joint Research Centre, Best Available Techniques Reference Document for the Textiles Industry, 2023, https://bureau-industrial-transformation.jrc.ec.europa.eu/sites/default/files/2023-01/TXT_BREF_2023_for_publishing%20ISSN%201831-9424_final_1_revised.pdf (retrieved 2026-08-12)	textile process decomposition, wet processing, finishing, and emissions-control context
eu-textiles-bat-2022	Official guidance (official_guidance)	Commission Implementing Decision (EU) 2022/2508 establishing BAT conclusions for the textiles industry, CELEX 32022D2508, https://eur-lex.europa.eu/eli/dec_impl/2022/2508/oj/eng (retrieved 2026-08-12)	input/output inventories, water and energy management, chemical management, wastewater and air-emission monitoring, process boundary
eu-ecolabel-textiles-2014	Official guidance (official_guidance)	Commission Decision 2014/350/EU establishing EU Ecolabel criteria for textile products, consolidated text, CELEX 32014D0350, https://eur-lex.europa.eu/eli/dec/2014/350/oj/eng (retrieved 2026-08-12)	textile-product scope, electrical exclusion, fibre/component disclosure, chemicals, processing, and fitness-for-use context
ifc-textile-ehs-2007	Official guidance (official_guidance)	World Bank Group / IFC, Environmental, Health, and Safety Guidelines for Textile Manufacturing, 30 April 2007, https://www.ifc.org/content/dam/ifc/doc/2000/2007-textiles-manufacturing-ehs-guidelines-en.pdf (retrieved 2026-08-12)	water, chemicals, wastewater, waste, and air-emission collection and control context
iso-14044-2006	Standard (standard)	ISO 14044:2006, Environmental management — Life cycle assessment — Requirements and guidelines, including Amendments 1:2017 and 2:2020, https://www.iso.org/standard/38498.html (retrieved 2026-08-12)	goal and scope, inventory, allocation, completeness, reporting, and review rules
iso-14048-2002	Standard (standard)	ISO/TS 14048:2002, Environmental management — Life cycle assessment — Data documentation format, confirmed 2025, https://www.iso.org/standard/29872.html (retrieved 2026-08-12)	transparent data fields, collection, calculation, quality, and exchange documentation