Other edible products of animal origin n.e.c.

1. Scope and Applicability

This residual method covers one concrete edible animal-origin good not classified elsewhere in CPC 3.0. Each lot requires a named product and animal source, legal provenance, human-food eligibility, sold state, classification decision and actual gate. Edible bird nests, turtle eggs, royal jelly and propolis are possible examples only after individual classification and legal review; none stands for the whole class. The method does not assert their legality in any jurisdiction. Exclude non-living edible insects (02931), natural honey, ordinary bird eggs, raw milk, meat, snails, non-food goods and differently classified finished food. A species-free average or universal yield is invalid.

A compatible source-specific upstream record carries source production and its biological phases. Foreground collection is an independent interface; first preparation and preservation are performed only when real, followed by food grading and protective handover. Purchased goods enter at their actual later node with upstream burdens; do not invent another harvest. The gate is the real production or first-collection handoff, excluding distribution, retail and further food manufacture.

2. Product Category Identity

Field	Value
canonical_pcr_id	pcr.agriculture-forestry-and-fishery-products.live-animals-and-animal-products-excluding-meat.other-edible-products-of-animal-origin-n-e-c
classification_refs	CPC 3.0 02939; check each named good against more specific positions.
covered_products	One lawful, human-edible residual animal-origin good with confirmed product classification.
excluded_products	Insects, natural honey, ordinary eggs, raw milk, meat, snails, non-food goods and differently classified prepared foods.
representative_product	One named, source-qualified good in one sold state; examples do not define a universal representative.
production_route	Actual lawful source collection, performed first preparation/preservation, grading and protective handover.
market_state	Net edible product with source, legality, food status, moisture, grade, package tare and gate.

3. Reference Flow

Field	Value
What	One named, classification-confirmed residual edible animal-origin product.
How much	1 kg net saleable product excluding package and separately removed inedible matter.
How well	Declare animal species/source, legal and food status, grade, moisture, physical state and gate.
How long or cycle	Link source establishment, productive/termination periods, collection and shared services to real lots once.
reference_flow_link	sold

Field	Value
Reference amount	1
Reference product flow	Source-, state- and gate-qualified other edible animal-origin good
Reference flow property	Mass 93a60a56-a3c8-11da-a746-0800200b9a66
Reference unit group	Mass units 93a60a57-a4c8-11da-a746-0800200c9a66
Reference unit	kg
Required qualifiers	named good; animal species/source; lawful provenance; CPC and food status; moisture; grade; sold state; net/tare; gate; period

4. Measurement and Unit Rules

rule_id	Applies to	Required property	Required unit	Rule
m_net	sold lot	Mass	kg	Calibrated gross minus package tare and separately removed inedible matter; disclose retained moisture.
m_states	each performed node	Mass	kg	Reconcile before/after state and actual additions/removals; never apply a cross-product yield.
m_period	source and shared assets	Time	period	Assign source, collection, replacement and shared-service events to their actual period once.
inventory_reference_normalization	all inventory rows	Actual flow property	exchange unit per reference flow	The inventory and collection aggregation fields below express final amounts per declared reference flow. Keep all raw collection records, original denominator qualifiers, route/period strata, unit conversions and allocation requirements. For each flow, first obtain its attributable amount in its own numerator unit using the existing rules; then divide by the measured accepted reference-output quantity of the same scope and multiply by the declared reference quantity. Do not mix species, states, gates or incompatible routes; count transfers and shared burdens once. A missing, zero or untraceable accepted-output denominator is a blocking data-quality issue. Keep provisional QA ranges on their explicitly stated bases; they are not conversion factors or production defaults. These are final foreground-package contributions, not replacements for stage quantitative references or stage-native unit-process datasets. Retain stage records separately. Compute normalized amount = attributable raw amount * declared reference quantity / measured accepted final reference-output quantity. Apply normalization exactly once.
stage_throughput_linkage	stage records and final package contributions	Actual flow property and its stated raw basis	retain native numerator and stage denominator units	Keep the original lot, event, cohort, period and stage denominators with their units. Reconstruct the attributable numerator A with measured stage quantity Q_stage and documented attribution before final normalization. If a quoted amount a_B corresponds to an explicit stage basis B_stage (for example, 1000 kg), use A = a_B * Q_stage / B_stage. If r_stage is already an intensity in exchange-unit per stage-unit, instead use A = r_stage * Q_stage, with no second division by B_stage. A raw attributable total is used directly. Final contribution = A * declared reference quantity / measured accepted final output. Convert compatible units explicitly and apply each attribution/allocation share exactly once; never treat a quoted amount or intensity as a raw total. Link stage transfers, losses, rejects, stocks, shared services and allocation to the same actual route, period and final-output stratum. For a 1000 kg basis retain 1000 kg explicitly. Do not assume unit yield, equal fresh/dried mass, equal head mass, equal dose quality or interchangeable gates. Missing links, unsupported unit conversion, zero denominators and untraceable allocation block dataset production. Stage-native datasets retain their own stage reference; package contributions are a separate projection.

5. System Boundary

Boundary Abstraction

Field	Value
declared_starting_condition	A named lawful animal, colony or nest-source good at actual collection, or documented purchased material in its entering state.
starting_condition_role	Compatible source-specific upstream dataset carries source production, phases and actual co-products; foreground begins at independent collection or purchased handoff.
product_classification_scope	CPC 02939 only after checking exclusions and all more specific CPC positions for the named good.
recursive_input_rule	Purchased same-category goods retain upstream burden and enter their true later node, never a second fictitious collection.
upstream_dataset_requirement	Source/species, legal chain, source periods, real output set, incoming state and burden coverage.
disclosure	Named good, classification rationale, legal/food status, actual route, periods, output set, gate and unresolved identities.

Boundary Rules

rule_id	Applies to	Rule	source_ids
b_identity	each lot	Require concrete good, lawful provenance, food eligibility and residual CPC classification; examples do not prove 02939.	un-cpc-3;eu-residual
b_collect	source collection	Distinguish actual animal, colony or nest production from independent removal, incidental losses and collected handoff; purchased goods bypass collection.	eu-residual
b_prepare	first preparation	Include actual first cleaning/separation, water or service inputs, collected/prepared handoff and non-food rejects; bypass when absent.	eu-residual
b_preserve	preservation	Identify usable before/after state, actual energy and services, residues, evaporation and rejects; bypass when absent.	eu-residual
b_grade	grades and gate	Enumerate accepted, separately saleable downgrade and ineligible reject with distinct destinations; protect to actual gate, excluding freight.	un-cpc-3

6. Process Inventory Structure

Process Map

process_id	process_name	inclusion	inclusion_condition	role	quantitative_reference
collect	Source-qualified collection	conditional	actual new lawful source; purchased material bypasses collection	Independent source-to-collected handoff; incidental loss separate	kg output of node
prepare	First hygienic preparation	conditional	actual cleaning or separation	Raw collected to prepared state; water and rejects recorded	kg output of node
stabilize	Optional preservation	conditional	actual permitted stabilizing intervention	Usable before/after states, energy and reject recorded	kg output of node
grade	Food-grade sorting	required	concrete edible lot	Accepted, saleable lower grade and ineligible reject have separate destinations	kg output of node
handover	Protective presentation and handover	required	saleable food-qualified lot	Actual package/reuse role, net product and source/first-collection gate	kg output of node

One concrete source route is required. Nest, secretion and egg collection have no common biological operation or yield. Enumerate every real marketed source output at its own handoff, plus incidental residues; make a source-specific attribution decision. Each conditional node has a measured entering and leaving state and is bypassed if not performed. Shared collection, cleaning, chilling, sorting and packing assets attach to actual nodes and periods once. A downgraded grade is a second Product only when independently saleable and food-eligible; ineligible rejects are never food outputs.

Process: Source-qualified collection (collect)

Inputs

Product flows

Lawful source-held material (source)

One concrete edible animal-origin good at a documented animal, colony or nest source; upstream source production is not recounted.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Source-qualified animal-origin material (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_collect
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Waste flows

Elementary flows

Outputs

Product flows

Collected qualifying product (collected)

Hand off the weighed collected state once, including source and actual period.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Collected source-qualified edible product (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_collect
• Range: Measured normalization identity
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Collected record (collected_record)

Waste flows

Collection incidental and reject (collection_reject)

Separate unusable material from marketed co-products and document its destination.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Non-food collection residue (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_reject
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Elementary flows

Process: First hygienic preparation (prepare)

Inputs

Product flows

Collected material for first preparation (preparation_in)

Conditional on actual cleaning or separation; otherwise bypass to grading.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Collected edible animal-origin material (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_prepare
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Conditional cleaning water (cleaning_water)

Meter Product water only if wet cleaning is performed; trace wastewater destination.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Actual supplied cleaning water (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_prepare
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Waste flows

Elementary flows

Outputs

Product flows

First-prepared qualifying product (prepared)

Record measured prepared state and next handoff; no cross-product yield.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: First-prepared source-qualified edible product (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_prepare
• Range: Measured normalization identity
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Collected record (collected_record)

Waste flows

First-preparation reject (preparation_reject)

Classify inedible contamination, debris and actual destination; do not call it edible output.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Non-food preparation residue (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_reject
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Elementary flows

Process: Optional preservation (stabilize)

Inputs

Product flows

Usable product before preservation (stabilization_in)

Use the actual collected or prepared input when a bounded preservation step occurs.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Source-qualified product before preservation (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_stabilize
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Electricity at the equipment supply point (energy_electricity)

Collection scope and applicability for energy. The following concrete identities have separate cards and apply only when use or generation is evidenced inside the original process scope. They are not mandatory inputs or a default recipe. Document non-use; missing records are not zero. Add a separate concrete card for any other actual material instead of substituting one of these names or UUIDs. Preserve attribution and boundaries and avoid double counting components included in outsourced services.

Meter actual energy carrier for performed chilling, drying or other lawful stabilization. Denominator and scope requirements：per kg output of the corresponding process Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

Confirm identity, grade, state and unit from equipment, supplier and contemporaneous measurements; the product UUID does not establish actual use or upstream-provider compatibility. Retain the electricity supply point, fuel grade, density and heating-value basis. Distinguish purchased heat from on-site fuel conversion without counting its input fuel again.

• Selected flow: Alternating current 455f0ef5-6118-4f2b-a3f5-1f75e0afe3ca
• Flow property / unit: Energy / kWh
• Amount rule: Collect raw quantities for this identity under cp_stabilize and calculate the exchange per declared reference flow using the original attribution rules.
• Value mode: Foreground record (foreground_record)
• Specificity: Site-specific (site_specific)
• Normalization basis: per declared reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Collected record (collected_record)
• Collection protocol: cp_stabilize
• Sources: fao-agricultural-energy

This binding is alternating current at the use point with supply technology, voltage and provider unspecified. Confirm actual AC supply; DC requires a different identity. The database reference is 1 MJ: preserve meter kWh and convert once using 1 kWh = 3.6 MJ when linking reference quantities. Internal generation links to its foreground generator, without an additional purchased-electricity burden.

Waste flows

Elementary flows

Outputs

Product flows

Stabilized qualifying product (stabilized)

Measure after-state and moisture, then hand off to grading.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Stabilized source-qualified edible product (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_stabilize
• Range: Measured normalization identity
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Collected record (collected_record)

Waste flows

Preservation reject (stabilization_reject)

Record spoiled/rejected matter by legal destination; evaporation is a separate balance term.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Non-food preservation reject (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_reject
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Elementary flows

Process: Food-grade sorting (grade)

Inputs

Product flows

Qualifying material before grading (grading_in)

Select exactly one actual collected, prepared or stabilized predecessor state.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Source-qualified edible product before grade (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_grade
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Waste flows

Elementary flows

Outputs

Product flows

Accepted food-grade product (accepted)

Declare food status, state and destination to handover.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Accepted source-qualified edible product (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_grade
• Range: Measured normalization identity
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Collected record (collected_record)

Separately saleable lower grade (downgrade)

Only if independently marketable and food-eligible; otherwise classify as reject.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Food-eligible downgraded product (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_grade
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Waste flows

Food-ineligible reject (grade_reject)

Document legal non-food disposition, never an edible grade.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Food-ineligible animal-origin reject (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_reject
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Elementary flows

Process: Protective presentation and handover (handover)

Inputs

Product flows

Accepted product before package (handover_in)

Transfer accepted grade once to protective presentation.

Denominator and scope requirements：per kg output of the corresponding process

Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output.

• Selected flow: Accepted source-qualified edible product (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_handover
• Range: Provisional nonnegative ledger QA, not a yield or recipe
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 100000
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Waste flows

Elementary flows

Outputs

Product flows

Net qualified product at source gate (sold)

Net mass excludes package at the real production or first-collection gate.

Raw reference-output records: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Preserve the measured accepted lot quantity and every required qualifier. The amount below is the normalized reference exchange, not an assertion that a physical lot contains only one unit.

Denominator and scope requirements：per reference flow

• Selected flow: Source-, state- and gate-qualified other edible animal-origin good
• Flow property / unit: Mass / kg
• Amount rule: 1 kg
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_handover
• Range: Measured normalization identity
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg output of corresponding process
  • Basis kind: Process output (process_output)
  • Evidence kind: Collected record (collected_record)

Waste flows

Elementary flows

7. Allocation and Co-product Handling

rule_id	Applies to	Rule	source_ids
a_source	actual source output set	Enumerate each intended product, amount and gate. Use measured causal attribution when supported; otherwise document period-specific economic allocation with sensitivity. Do not assign automatic zero or entire source burden to 02939.	eu-residual
a_grade	grades and residue	Accepted and separately saleable downgraded goods have disjoint masses/destinations; non-food rejects and incidental residue are not extra edible products.	un-cpc-3
a_period	phases and shared service	Index source establishment/productive/replacement/termination periods; assign observed shared-service time or throughput to consuming nodes/lots once with evidence.

Concrete cards do not inherit numerical ranges from the former aggregate card. Determine quantities from original records, stock/meter reconciliation and the declared reference flow; no default quantity or numeric screen is supplied without evidence matching the identity, unit, period and boundary. Missing range evidence is a quality disclosure, not zero use or proof of completeness.

8. Foreground Data Collection, Calculation, and Quality Rules

Specific input identification before dataset completion

Identify the actual input for this operation from supplier specifications, equipment and primary records. This is a mandatory collection requirement, not an exchange. Before dataset completeness, represent each used material, formulated product, carrier or independently purchased service by one physically specific card with its native quantity/property; confirm a compatible UUID, or retain an explicit unresolved identity and do not claim a fully linked dataset. Do not substitute a conditional example for an unknown actual input, invent a recipe, omit required use or infer zero from missing records. Attribute shared use, reusable assets and inclusive services once; preserve the original stage/period and measured throughput link to final reference output. The former aggregate range is not a component limit or consumption default.

requirement_id	collection_protocol_id	Preserved collection scope
package_specific_input	cp_handover	Operation handover: Record package material, tare and reuse or single-use service. Denominator and scope requirements：per kg output of the corresponding process Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.

Data Collection Protocols

| protocol_id | process_id | flow_role | record_type | raw_fields | collection_method | unit | frequency | temporal_coverage | site_scope | aggregation_rule | quality_evidence | | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | | cp_collect | collect | source and collected good | source ledger | good, species, legal/food status, real outputs, mass, gate, period | source ticket and calibrated scale; Raw aggregation requirements: once per output/lot. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. | kg;period | each lot | source and collection periods | source and collector | per reference flow | source, legal and scale records; traceable numerator, accepted reference-output denominator and normalization worksheet | | cp_prepare | prepare | first cleaning and prepared good | batch ledger | state, mass in/out, water, service, rejects | ticket, scale and meter; Raw aggregation requirements: measured state balance. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. | kg | each performed lot | preparation period | site | per reference flow | ticket and calibration; traceable numerator, accepted reference-output denominator and normalization worksheet | | cp_stabilize | stabilize | optional preservation | preservation ledger | pre/post state, mass, moisture, temperature, energy, losses | meter, scale and assay; Raw aggregation requirements: before/after balance. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. | kg;MJ | each performed lot | preservation period | site | per reference flow | meter and assay; traceable numerator, accepted reference-output denominator and normalization worksheet | | cp_grade | grade | grades and destinations | grade ledger | accepted, downgrade, reject, food decision, destinations | grade ticket and scale; Raw aggregation requirements: disjoint output set. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. | kg | each lot | grading period | site | per reference flow | grade/destination records; traceable numerator, accepted reference-output denominator and normalization worksheet | | cp_handover | handover | net sale, package, gate | dispatch ledger | state, moisture, gross, tare, net, package reuse, gate | dispatch ticket and scale; Raw aggregation requirements: one net handover/lot. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. package_specific_input: Operation handover: Record package material, tare and reuse or single-use service. Denominator and scope requirements：per kg output of the corresponding process Raw quantity and calculation requirements: Measure the actual flow by source, lot and period; bypassed conditional nodes are not modelled. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records. Identify the actual input for this operation from supplier specifications, equipment and primary records. This is a mandatory collection requirement, not an exchange. Before dataset completeness, represent each used material, formulated product, carrier or independently purchased service by one physically specific card with its native quantity/property; confirm a compatible UUID, or retain an explicit unresolved identity and do not claim a fully linked dataset. Do not substitute a conditional example for an unknown actual input, invent a recipe, omit required use or infer zero from missing records. Attribute shared use, reusable assets and inclusive services once; preserve the original stage/period and measured throughput link to final reference output. The former aggregate range is not a component limit or consumption default. | kg | each lot | handover period | site | per reference flow | ticket and calibration; traceable numerator, accepted reference-output denominator and normalization worksheet | | cp_reject | collect;prepare;stabilize;grade | residue/waste | disposition ledger | lot, type, mass, legal status, destination | weighing and transfer ticket; Raw aggregation requirements: once per terminal destination. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. | kg | each event | relevant period | site | per reference flow | transfer record; traceable numerator, accepted reference-output denominator and normalization worksheet |

Calculation Rules

rule_id	Applies to	Formula or rule	Inputs	Output	source_ids
c_net	sale lot	Net qualified good = gross - package tare - separately removed inedible matter; use actual moisture, not a universal dry conversion.	cp_handover	kg net good
c_balance	performed nodes	Reconcile material input and additions with food outputs, rejects, measured water loss and stock change; investigate residual.	cp_collect;cp_prepare;cp_stabilize;cp_grade;cp_reject	kg balance residual
c_period	source and shared assets	Link each source phase and shared service to real lots and periods, allocating once by observed use.	cp_collect;cp_prepare;cp_stabilize;cp_handover	burden/kg
c_norm	concrete exchange	Divide attributable exchange by positive net mass of the same named good/source/state/gate lot.	cp_handover	unit/kg good

Data Quality Requirements

requirement_id	Applies to	Requirement	Evidence
q_identity	each lot	Verify residual CPC classification, named good/species, legal chain, food eligibility, sold state and gate.	source, legal, food and dispatch records
q_mass	each lot	Calibrate gross/tare and before/after mass; assay relevant moisture/contamination.	scale, assay and balance
q_allocation	source and shared assets	Complete real output set, phases, attribution driver and nonduplicated asset burden.	output, service and period ledgers
q_uuid	each concrete exchange	Confirm flow type, role, source, state, gate, property and unit support before fixed UUID.	detail verification evidence

9. Validation Rules

rule_id	Applies to	Rule	source_ids
v_scope	reference lot	Reject generic other-animal averages, insects, honey, ordinary eggs, raw milk, meat, snails, non-food goods and elsewhere-classified food; require legal and food evidence.	un-cpc-3;eu-residual
v_route	source	Require real source or documented purchased input; reject fictitious common biology, duplicate collection and unperformed treatment.	eu-residual
v_balance	each lot	Reconcile performed states, additions/removals, grade/reject destinations and net dispatch.
v_allocation	periods/outputs	Reject omitted real co-products, duplicate grades, zero/full automatic burden and duplicate shared service.
v_identity	final exchange	Verify named good, source, state, gate, direction/type and property/unit support.
v_foreground_emission_responsibility	Actual operated nodes and linked services	Record responsibility for on-site fuel combustion and refrigerant leakage when applicable: either quantified foreground emissions or a named linked process explicitly covering them, never merely a fuel-supply or electricity-production input. Assess special-taxon biological and residue emissions using species/route evidence, without a generic livestock factor. Identify any unresolved pathway and withhold a completeness claim; document supported absence and prevent duplicate upstream/downstream accounting.

10. Published Dataset Profile

Field	Value
dataset_role	One source-, route-, state-, grade- and gate-qualified residual edible animal-product foreground dataset.
downstream_use	Candidate secondary_dataset or background_dataset only after concrete identity review and publication.
allowed_use	Same named good/source/state comparison or measured conditional conversion.
excluded_use	Cross-good proxy, unlawful or non-food source, undocumented food status, downstream prepared food and universal yield.
required_metadata	Named good, residual classification rationale, species/source, legality, food status, state/moisture, net mass, gate, periods, outputs and bypasses.
required_quality_disclosure	Output/period attribution, shared-asset driver, mass balance, reject fate and unresolved UUIDs.
update_trigger	Exact platform identity confirmation, classification/legal/source change or measured route evidence.

11. Data Sources

Source id	Type	Reference	Used for
un-cpc-3	official_guidance	UN CPC 3.0 explanatory notes	Residual class and adjacent exclusions.
eu-residual	official_guidance	EU animal-origin food rules and residual examples	Candidate examples and food-use checks, not universal CPC classification.
fao-agricultural-energy	official_guidance	FAO Energy demand and consumption in African agriculture, Annex C case-study results, https://www.fao.org/4/v9766e/v9766e08.htm	conditional concrete identities and method context; does not establish site use or quantities