茶或马黛茶的浸膏、香精和浓缩物及以其或茶/马黛茶为基本成分的制品

茶或马黛茶的浸膏、香精和浓缩物及以其或茶/马黛茶为基本成分的制品：This PCR governs foreground data packages for manufacture of an explicitly declared tea-derived or maté-derived extract, essence…

生命周期状态: 候选
内容成熟度: 已编写方法学
当前版本: 尚未发布版本
使用就绪度: 尚待评审
最后更新: 2026-08-24

方法学与翻译状态由源文件记录；网站发布不会改变其评审状态。

内容语言

zh-CN · 已对齐

查看状态、分类与来源详情

使用就绪度

提示项 methodology_not_reviewed Authored methodology is candidate guidance and still requires methodology review.

分类映射

CPC 3.0:23914 · exact

源文件

library/pcrs/food-products-beverages-and-tobacco-textiles-apparel-and-leather-products/grain-mill-products-starches-and-starch-products-other-food-products/extracts-essences-and-concentrates-of-tea-or-mate-and-preparations-with-a-basis-thereof-d5c511ddsha256:9034268030a9…

1. 范围与适用性

This PCR governs foreground data packages for manufacture of an explicitly declared tea-derived or maté-derived extract, essence, concentrate, soluble powder, or preparation. A data package shall declare exactly one botanical route (tea from Camellia sinensis or mate from Ilex paraguariensis) and exactly one delivered product state (liquid_extract, liquid_concentrate, powder, essence, or formulated_preparation). Tea and maté routes, liquid and powder routes, and spray-dried and freeze-dried routes shall not be combined as defaults.

The foreground boundary begins with receipt of the declared tea or maté raw material and ends with packaged product at factory storage. It covers screening, water addition, extraction, solid-liquid separation, clarification or filtration, concentration, applicable aroma recovery, powder drying only for a declared powder route, formulation only for a declared preparation, applicable heat treatment, sanitation, packaging, storage, on-site thermal utilities, and refrigeration. Cultivation, primary tea manufacture, primary maté preparation, ingredient production, packaging-material production, purchased utilities, distribution, retail, consumer preparation, and end of life require linked upstream or downstream datasets and are not silently included in the foreground.

2. 产品类别识别

字段	值
canonical_pcr_id	pcr.food-products-beverages-and-tobacco-textiles-apparel-and-leather-products.grain-mill-products-starches-and-starch-products-other-food-products.extracts-essences-and-concentrates-of-tea-or-mate-and-preparations-with-a-basis-thereof-d5c511dd
classification_refs	CPC 3.0: 23914
covered_products	Tea or maté extracts, essences and concentrates; soluble tea or maté powders; and preparations whose declared basis is tea extract, maté extract, tea, or maté.
excluded_products	Unextracted tea leaves; unextracted maté leaves; ready-to-drink beverages classified elsewhere; coffee products; herbal infusions not based on tea or maté; and products lacking a declared botanical source and delivered state.
representative_product	1 kg of one declared tea-derived or maté-derived product in its delivered liquid, concentrate, powder, essence, or formulated state at factory storage.
production_route	Botanical source and product state are mandatory route selectors. Water extraction is the default extraction family; enzymes, ethanol, clarification aids, aroma recovery, spray drying, freeze drying, formulation, heat treatment, on-site fuel use, and refrigeration apply only when declared and operated.
market_state	Packaged intermediate ingredient or packaged finished preparation at factory storage, with actual solids or moisture, formulation, packaging, and storage condition declared.

3. 参考流

字段	值
What	One declared tea-derived or maté-derived extract, essence, concentrate, soluble powder, or preparation that meets its declared composition and quality specification.
How much	1 kg net product at the factory-storage gate, excluding packaging mass.
How well	Delivered product state, botanical source, dry-solids or moisture basis, formulation, aroma-recovery status, heat-treatment status, and packaging configuration are declared and conform to the product specification.
How long or cycle	One production batch or campaign ending at release to factory storage; storage duration and temperature are declared when they affect refrigeration or loss.
reference_flow_link	Exactly one final-product output row in `packaging_and_storage`, selected by the declared botanical source and product state.

字段	值
参考数量	1 kg 净声明产品
参考产品流	天工精确参考产品流尚未解决；不指定近似 UUID。
参考流属性	质量 `93a60a56-a3c8-11da-a746-0800200b9a66`
参考单位组	质量单位组 `93a60a57-a4c8-11da-a746-0800200c9a66`
参考单位	kg
必需限定信息	botanical_source; delivered_product_state; tea_or_mate_type; extract_or_preparation_identity; net_mass; dry_solids_or_moisture_basis; formulation_bom; extraction_solvent; concentration_method; aroma_recovery_status; drying_route; heat_treatment_status; packaging_configuration; storage_temperature; storage_duration; geography; reference_period

未解决的参考产品 UUID 是发布阻断项。本类别不得用天工通用 Tea 流近似替代产品身份。

4. 计量与单位规则

rule_id	适用对象	必需流属性	必需单位	规则
`reference_mass`	final 参考产品	Mass `93a60a56-a3c8-11da-a746-0800200b9a66`	kg	Normalize every exchange to 1 kg net declared product at factory storage; packaging mass is inventoried separately and is excluded from net product mass.
`solids_basis`	extracts, concentrates, powders, and preparations	Mass fraction	kg dry solids/kg product or % w/w	Record measured dry solids or moisture and the test method; conversions between wet and dry bases shall use the same batch result and retain the unrounded measurement.
`energy_carrier_separation`	electricity, steam, heat, and fuels	Energy or Mass, as metered or invoiced	kWh, MJ, or kg	Preserve each carrier as a separate atomic exchange. Do not merge electricity, steam, heat, natural gas, or another fuel before normalization.
`water_balance`	added water, condensate, wastewater, and product water	Mass or volume with density	kg or m3	Record water by stream. If volume is converted to mass, retain measured temperature/density or the documented conversion assumption.

5. 系统边界

rule_id	适用对象	规则	source_ids
`boundary_foreground_steps`	foreground manufacturing	Include raw-material receipt and screening, water addition, extraction, separation, clarification or filtration, concentration, applicable route steps, sanitation, packaging, storage, and directly controlled utilities.	`fao-who-jmpr-boscalid-2019`; `ec-jrc-fdm-bref-2019`
`boundary_route_exclusivity`	route selection	Declare one botanical source and one delivered product state; include aroma recovery, spray drying, freeze drying, formulation, heat treatment, fuel combustion, and refrigeration only when the declared route uses them.	`iso-6079-2021`; `dao-et-al-2021-tea-spray-drying`
`boundary_complete_exchanges`	process inventory	Record all materially relevant material and energy inputs, wastes, wastewater, and direct elementary flows without collection labels or combined utility rows.	`eu-pef-method-2021`; `ec-jrc-fdm-bref-2019`
`boundary_upstream_links`	purchased inputs	Link each purchased raw material, ingredient, aid, filter medium, cleaning chemical, packaging component, refrigerant, and utility to an upstream dataset with matching identity and geography; do not assign zero burden when a provider is missing.	`eu-pef-method-2021`

边界概化

字段	值
declared_starting_condition	Tea or maté raw material received at the extract-manufacturing site, with botanical identity, prior processing state, moisture, supplier, origin, and incoming packaging declared.
starting_condition_role	Foreground manufacturing input; cultivation and primary leaf processing are upstream.
product_classification_scope	CPC 3.0: 23914, interpreted by the declared product identity rather than by a generic beverage or leaf flow.
recursive_input_rule	A purchased tea or maté extract, concentrate, powder, essence, or preparation used as an ingredient remains a visible product input linked to its upstream dataset; do not recursively recreate its production inside this foreground package.
upstream_dataset_requirement	Each raw material, ingredient, processing aid, filter medium, cleaning chemical, packaging component, refrigerant, purchased electricity, steam, or heat requires a compatible upstream provider or an explicit unresolved-provider disclosure.
disclosure	Declare botanical source, input state, extraction solvent, concentration technology, applicable aroma and drying route, formulation, heat treatment, utilities, packaging, storage, exclusions, provider gaps, and any cut-off.

6. 过程清单结构

过程图

process_id	过程名称	纳入状态	纳入条件	建模角色	定量参考
`raw_material_receipt`	原料接收与筛选	required	只选择一种植物来源路线；不得同时默认茶和马黛茶。	前景准备	每批次及每 1 kg 最终产品
`aqueous_extraction`	配水与浸提	required	记录实际溶剂体系；酶或乙醇仅在使用时纳入。	前景浸提	每浸提批次
`solid_liquid_separation`	固液分离	required	纳入实际使用的离心、压榨、筛分或等效分离操作。	前景分离	每浸提批次
`clarification_filtration`	澄清与过滤	required	仅记录实际使用的助剂和介质。	前景纯化	每澄清浸提液批次
`concentration`	浓缩	required	声明蒸发、膜处理或其他浓缩技术。	前景浓缩	每浓缩物批次
`aroma_recovery`	香气回收	conditional	仅在香气被回收、分离、回添或销售时纳入。	前景回收	每适用批次
`spray_drying`	喷雾干燥	conditional	仅适用于已声明的喷雾干燥粉体路线。	前景干燥	每喷雾干燥批次
`freeze_drying`	冷冻干燥	conditional	仅适用于已声明的冷冻干燥粉体路线。	前景干燥	每冷冻干燥批次
`formulation_blending`	配方与调和	conditional	仅适用于已声明制品，并分别列出每种配方成分。	前景配方	每配方批次
`heat_treatment`	产品热处理	conditional	仅在使用巴氏杀菌、灭菌或其他产品热处理时纳入。	前景调质	每处理批次
`thermal_utility_generation`	现场热力公用工程	conditional	现场燃烧燃料时纳入；外购蒸汽或热仍作为消耗过程的外购输入。	前景公用工程	每公用工程计量期
`refrigeration`	制冷	conditional	过程冷却或冷藏使用前景控制范围内的制冷系统时纳入。	前景公用工程	每种制冷剂及计量期
`sanitation_wastewater`	清洗与废水管理	required	纳入直接控制的清洗及废水或污泥处理。	前景辅助	每批次或清洗周期
`packaging_and_storage`	包装与工厂储存	required	记录每个实际包装组件和储存条件。	前景终加工	每 1 kg 最终产品