声明交付边界的新鲜番茄
- 生命周期状态
- 候选
- 内容成熟度
- 已编写方法学
- 当前版本
- 尚未发布版本最后更新
- 使用就绪度
- 尚待评审
方法学与翻译状态由源文件记录;网站发布不会改变其评审状态。
内容语言
查看状态、分类与来源详情
使用就绪度
- 提示项 methodology_not_reviewed Authored methodology is candidate guidance and still requires methodology review.
分类映射
源文件
1. 范围与适用性
本 PCR 用于商业鲜食番茄(Solanum lycopersicum)的前景数据包构建,范围从生产单元建立、作物管理、采收、可选的一次调理到声明的农场门或包装厂门交付。覆盖露地、温室、水培和基质路线的圆形、肋纹、长椭圆、樱桃及鸡尾酒番茄,但必须声明路线、果型和交付状态。
番茄种子生产、育苗移栽苗生产、罐藏、干制、果汁、果泥、浓缩物、酱料、烹饪产品、零售、消费者储存和消费不在范围内。仅当加热、冷却、包装和运输发生在声明门点之前时才纳入。只有在各生产单元和批次均与合格产出完成核算后,才可汇总多个品种或采收轮次。
2. 产品类别识别
| 字段 | 值 |
|---|---|
| canonical_pcr_id | pcr.agriculture-forestry-and-fishery-products.products-of-agriculture-horticulture-and-market-gardening.tomatoes |
| classification_refs | CPC 3.0:01234 Tomatoes; mapping relation: exact |
| covered_products | 在声明农场门或包装厂门交付的新鲜、完整、未加工番茄,包括圆形、肋纹、长椭圆、樱桃和鸡尾酒类型 |
| excluded_products | 番茄种子和移栽苗;罐藏、干制、榨汁、果泥、浓缩、酱料或烹饪番茄产品;零售和消费者阶段 |
| representative_product | 符合声明成熟度、硬度、清洁度、尺寸、等级、缺陷和包装条件的可销售新鲜番茄 |
| production_route | 露地、温室、水培或基质栽培,包含建植、作物管理、采收、分级、可选清洗或冷却及一次包装 |
| market_state | 在声明农场门或包装厂门的鲜食完整番茄,可为散装、串果或声明的一次包装状态 |
3. 参考流
| 字段 | 值 |
|---|---|
| What | 声明农场门或包装厂门的可销售新鲜番茄 |
| How much | 1,000 kg 净合格番茄 |
| How well | 声明番茄类型和品种组、成熟度或颜色阶段、硬度、尺寸和等级、清洁度、缺陷容许度、水分状态、适用时的串果状态、清洗或冷却状态及包装状态 |
| How long or cycle | 一个声明的番茄作物周期和采收期;同一栽植批次的全部采收轮次汇总到声明门点 |
| reference_flow_link | marketable_tomato_output |
| 字段 | 值 |
|---|---|
| 参考数量 | 1000 |
| 参考产品流 | 番茄 43dac9a5-d7b1-4536-84f3-38fa2f56562e |
| 参考流属性 | Mass 93a60a56-a3c8-11da-a746-0800200b9a66 |
| 参考单位组 | Units of mass 93a60a57-a4c8-11da-a746-0800200c9a66 |
| 参考单位 | kg |
| 必需限定信息 | 生产地理位置;番茄类型和品种组;露地、温室、水培或基质路线;种子或移栽苗状态;栽植日期;采收日期和轮次;作物周期或年度生产基准;成熟度和颜色阶段;尺寸和等级;硬度和缺陷标准;灌溉和养分供给方法;清洗和冷却状态;包装状态;声明门点;淘汰果和作物残体去向 |
构建前景数据包时,所有必需限定信息必须在数据集元数据、过程说明、参考流备注、产品描述或等效数据包字段中声明。缺失限定信息时,参考流定义不完整。参考产品流身份已按 CPC 3.0 01234 完成平台核验。
本参考 UUID 表示新鲜、未加工的农场门产品。使用该绑定前须核对实际物种、产品状态及交接门;独立包装站、进一步加工或不兼容状态的输出必须单独核实身份,不得直接继承此 UUID。身份核实不改变本 PCR 的实际系统边界或数量归一化要求。
4. 计量与单位规则
| rule_id | 适用对象 | 必需流属性 | 必需单位 | 规则 |
|---|---|---|---|---|
reference_tomato_mass | 参考产品和采收核算 | Mass | kg | 参考量采用声明门点的净合格番茄质量。分别称量采收、合格、降级、拒收、异物和作物残体流。 |
crop_cycle_normalization | 露地、温室、水培和基质路线 | Area and mass | ha or m2; kg | 分生产单元和栽植批次记录,再按同一作物周期的合格质量归一化全部投入和产出。 |
nutrient_product_basis | 矿质肥、施肥灌溉产品、粪肥、堆肥和改良剂 | Product and nutrient mass | kg product; kg N, P2O5, or K2O | 每种实际肥料或改良剂产品单独列卡,保留实物质量、配方、养分组成和施用记录;养分量不是同一产品的另一次投入,不使用集合或分组标识代替具体流身份。 |
irrigation_delivery_basis | 灌溉、施肥灌溉载水和源头取水 | Volume | m3 | 分别记录交付灌溉水和源头取水,并在建模时区分降雨、循环溶液、排水和排放。 |
harvest_round_aggregation | 多轮采收番茄路线 | Mass and time | kg and crop cycle | 汇总同一栽植批次的每个采收轮次,在归一化前核对合格果、降级果、田间损失和残体。 |
energy_carrier_conversion | 电力、加热、泵送和移动机械 | Energy or carrier mass | kWh, MJ, L, or kg | 保留计量载体、作业、换算因子和生产单元;不得仅根据产量推算温室加热。 |
packaging_mass_basis | 周转箱、纸箱、托盘、薄膜和可重复使用容器 | Mass or item count | kg or item | 当包装在门点前纳入时,记录包装质量或件数、容量、重复使用次数、回收率和批次归属。 |
5. 系统边界
边界概化
| 字段 | 值 |
|---|---|
| declared_starting_condition | 经准备的露地、温室、水培或基质生产单元接收番茄种子或移栽苗,并披露既有土地利用和排除的基础设施工程 |
| starting_condition_role | 声明番茄作物周期和前景投入核算的起点 |
| product_classification_scope | CPC 3.0:01234 的完整新鲜番茄,直到声明农场门或包装厂门 |
| recursive_input_rule | 购入的番茄种子或移栽苗按接收交接状态记录,并一次连接上游数据集;除非另有上游数据集,本 PCR 不重建其生产。 |
| upstream_dataset_requirement | 使用时必须为种子或移栽苗、养分产品、生长介质、植保产品、灌溉水、能源、包装以及购入运输或处理服务提供上游数据集。 |
| disclosure | 声明地理位置、番茄类型和品种组、路线、作物周期日期、种植密度、灌溉和施肥灌溉方法、养分基准、植保方案、采收轮次、合格与拒收质量、清洗和冷却、包装、水循环或排水、残体去向及门点位置。 |
边界规则
| 规则编号 | 适用对象 | 规则 | 来源 |
|---|---|---|---|
boundary_crop_cycle | 建植和作物管理 | 纳入归属于该作物周期的生产单元准备、栽植、作物管理、供水、养分投入、植保、能源和直接作物排放;披露既有土地利用并排除无关基础设施建设。 | fao-tomato-good-agricultural-practices; fao-greenhouse-vegetables-2013 |
boundary_route_specificity | 露地、温室、水培和基质路线 | 当基础设施、加热、泵送、循环、基质、排水和作物周期记录会实质改变清单时,按路线分开记录。 | fao-greenhouse-vegetables-2013 |
boundary_gate_preparation | 采收、分级、清洗、冷却和包装 | 默认前景边界止于声明农场门或包装厂门;只有在门点前发生时才纳入分级、清洗、冷却和一次包装。 | codex-cxs-293-2008; usda-ams-tomato-grade-standard |
boundary_nitrogen_emissions | 养分投入、土壤、排水和残体 | 使用记录的养分投入、排水或淋失证据及残体去向,以一种声明的方法估算适用的直接和间接氮排放,避免路径重复计数。 | ipcc-2019-managed-soils |
boundary_residue_fate | 拒收果、作物残体、清洗固体和废水 | 分别记录还田、堆肥、饲料利用、处理、运输或处置;只有在接收方、用途和分配处理有证据时才可产生抵扣。 | fao-tomato-good-agricultural-practices; iso-14044-2006 |
6. 过程清单结构
过程图
| process_id | 过程名称 | 纳入状态 | 纳入条件 | 建模角色 | 定量参考 |
|---|---|---|---|---|---|
crop_establishment | 番茄作物建植 | required | 每个栽植、畦面、温室分区、水培单元或基质周期 | 前景作物建植 | 栽植面积、种植材料和作物周期日期 |
crop_management | 番茄作物管理 | required | 每个番茄作物周期 | 前景受管理的生物生产 | 生产单元面积、灌溉、养分、植保、能源和采收期 |
harvest_and_gate_preparation | 番茄采收与门点准备 | required | 每个采收期 | 前景采收、调理、包装和门点交付 | 1,000 kg 可销售新鲜番茄 |
purchased_transport_to_gate | 至声明门点的购入运输 | conditional | 运输服务在声明门点前跨越前景边界时 | 前景交付服务 | 生产单元或包装厂至门点的吨公里 |
过程:番茄作物建植(crop_establishment)
输入
产品流
流:建植灌溉水(establishment_irrigation_water)
按来源和生产单元记录用于整地、出苗、移栽缓苗或初始施肥灌溉的水。
-
选定流:供应作物的灌溉用水
-
流属性/单位:Volume / m3
-
流集分组:
irrigation-water -
数量规则:汇总建植阶段的计量或水量平衡供水,排除降雨并单独识别循环溶液。
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_irrigation_records -
来源:
fao-crop-evapotranspiration-56 -
数量范围:建植灌溉筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:400
- 单位:m3/ha
- 基准:从栽植到形成均匀群体的建植阶段
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
废物流
基本流
输出
产品流
废物流
流:建植材料损失(establishment_planting_loss)
废弃或进入明确定义处理路线的未用种子、失败移栽苗和建植损失应被记录。
-
选定流:建植期种植材料损失
-
流属性/单位:Mass or count / kg or plant
-
数量规则:以未用和失败材料记录核对采购批次与栽植批次。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_establishment_records -
数量范围:建植损失筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:15
- 单位:所购种植材料的百分比
- 基准:采购批次与栽植或接收建植材料
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
基本流
过程:番茄作物管理(crop_management)
输入
产品流
番茄作物灌溉水(crop_irrigation_water)
记录同一作物周期内送达田间的灌溉及施肥灌溉用水,区分降雨、水源、施用方式和回流水。
-
选定流:供应作物的灌溉用水
-
流属性/单位:Volume / m3
-
数量规则:Sum metered or documented water-balance deliveries during crop management; report recirculated solution and drainage separately where material.
-
数值来源模式:Foreground record (
foreground_record) -
适用范围:Site-specific (
site_specific) 原始活动或阶段基准:per 1,000 kg accepted fresh tomato output from the same crop cycle. -
归一化基准:每声明的参考流
-
基准类型:Process output (
process_output) -
证据类型:Collected record (
collected_record) -
采集协议:
cp_irrigation_records -
来源:
fao-crop-evapotranspiration-56;fao-greenhouse-vegetables-2013 -
数量范围:Crop irrigation screening interval
- 范围角色:QA guardrail (
qa_guardrail) - 下限:0
- 上限:5,000
- 单位:m3/ha per crop cycle
- 基准:open-field, greenhouse, hydroponic, or substrate tomato crop cycle
- 基准类型:Crop cycle (
crop_cycle) - 证据类型:Reasoned estimate (
reasoned_estimate)
- 范围角色:QA guardrail (
尿素肥料(crop_management_agricultural_nutrient_inputs_urea)
crop_management_agricultural_nutrient_inputs 的采集范围与适用性。 下列具体身份分别列卡,仅在原有过程范围内有实际使用或产生记录时启用;不是必用材料清单或默认配方。未发生须有依据,缺少记录不得记为零。其他实际材料必须另建具体身份卡,不能套用以下名称或 UUID。保留原有归属和边界,避免与包含这些投入的外包服务双计。
逐一采集每种肥料产品。保留每种实际产品的身份、数量、配方、养分组成、施用事件和分配关系;复合产品不得重复计数。 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄.
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:尿素
3f8850c0-f718-4c4b-8fcb-8fd42e03aa8e - 流属性 / 单位:质量 / kg
- 数量规则:依
cp_nutrient_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_nutrient_records - 来源:
fao-greenhouse-vegetables-2013;ipcc-2019-managed-soils;fao-fertilizer-identities
仅当实际配方及等级兼容时使用此产品身份。保留供应商组成及质量记录,不以养分质量、稀释溶液质量或服务活动替代产品质量。UUID本身不提供剂量或排放因子。
硫酸铵肥料(crop_management_agricultural_nutrient_inputs_ammonium_sulfate)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:硫酸铵
8c6f0cbb-16d7-4dc9-8d55-e8dea17d7faf - 流属性 / 单位:质量 / kg
- 数量规则:依
cp_nutrient_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_nutrient_records - 来源:
fao-greenhouse-vegetables-2013;ipcc-2019-managed-soils;fao-fertilizer-identities
仅当实际配方及等级兼容时使用此产品身份。保留供应商组成及质量记录,不以养分质量、稀释溶液质量或服务活动替代产品质量。UUID本身不提供剂量或排放因子。
重过磷酸钙肥料(crop_management_agricultural_nutrient_inputs_triple_superphosphate)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:重过磷酸钙肥料
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_nutrient_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_nutrient_records - 来源:
fao-greenhouse-vegetables-2013;ipcc-2019-managed-soils;fao-fertilizer-identities
氯化钾肥料(crop_management_agricultural_nutrient_inputs_potassium_chloride)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:氯化钾肥料
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_nutrient_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_nutrient_records - 来源:
fao-greenhouse-vegetables-2013;ipcc-2019-managed-soils;fao-fertilizer-identities
作为肥料施用的牛粪(crop_management_agricultural_nutrient_inputs_cattle_manure)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:作为肥料施用的牛粪
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_nutrient_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_nutrient_records - 来源:
fao-greenhouse-vegetables-2013;ipcc-2019-managed-soils;fao-organic-nutrients
施入土壤的植物残体堆肥(crop_management_agricultural_nutrient_inputs_plant_compost)
用设备、供应商及同期计量记录确认身份、等级、状态和单位;UUID 尚未确认。 按产品实物质量计一次,并保留含水率、N/P/K 配方及施用事件;养分量是计算属性,不得另计同一产品。未列出的复合肥和有机肥须按配方或原料单独建卡。
- 选定流:施入土壤的植物残体堆肥
- 流属性 / 单位:质量 / kg
- 数量规则:依
cp_nutrient_records采集本卡身份的原始数量,按原有归属规则计算每声明参考流的交换量。 - 数值来源模式:前景记录(
foreground_record) - 适用范围:场址特定(
site_specific) - 归一化基准:每声明的参考流
- 基准类型:参考流(
reference_flow) - 证据类型:采集记录(
collected_record) - 采集协议:
cp_nutrient_records - 来源:
fao-greenhouse-vegetables-2013;ipcc-2019-managed-soils;fao-organic-nutrients
柴油 (mobile_machinery_fuel_diesel)
仅适用于本作业有记录的柴油机械。保留燃料牌号及配方,体积按实测或供应商支持的密度换算。其他动力系统按实际载能体记录,不用柴油当量替代。执行mobile_machinery_fuel_specific_input,本示例不是必用投入。不重复计入机械服务包含项,也不对现场发电内部转移的电力再计外购供电;实际燃料燃烧及发电排放仍须单独核算。
- 选定流:柴油
9d258d75-6792-4f1c-9856-81602ed8f816 - 流属性 / 单位:质量
93a60a56-a3c8-11da-a746-0800200b9a66/ kg - 数量规则:按
cp_energy_records采集crop_management的该载能体用量。共用量仅归属一次,归属原始量乘声明参考数量,再除以相同产品单位下匹配的最终合格产出数量;保留实测阶段吞吐及原有分配规则,不对已归一化量再次归一化。 - 数值来源模式:
calculated_value - 适用范围:
site_specific - 归一化基准:per declared reference flow
- 基准类型:
reference_flow - 证据类型:
calculated_from_collection - 采集协议:
cp_energy_records - 来源:
route-energy-fao
流:生产电力(production_electricity_input)
按计量和作业记录泵送、施肥灌溉、通风、照明、冷却和其他生产用电。
-
选定流:电力供应
-
流属性/单位:Energy / kWh
-
流集分组:
electricity-supply -
数量规则:汇总分表或发票中归属于生产单元和作物周期的记录;分开记录可再生能源和购入电力。
-
数值来源模式:前景记录(
foreground_record) -
适用范围:技术特定(
technology_specific) 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_energy_records -
来源:
fao-greenhouse-vegetables-2013 -
数量范围:生产电力筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:8,000
- 单位:kWh/ha per crop cycle
- 基准:声明路线的泵送、通风、照明和生产设备
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
废物流
基本流
流:灌溉源头取水(irrigation_source_withdrawal)
当河流、含水层、水库或市政水源取水可归属于番茄生产单元时记录。
-
选定流:自然水资源取用
-
流属性/单位:Volume / m3
-
数量规则:记录源头计量取水或文件化水量平衡,并核对交付、循环、储存和排放水量。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_irrigation_records -
来源:
fao-crop-evapotranspiration-56 -
数量范围:源头取水筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:6,000
- 单位:m3/ha per crop cycle
- 基准:分配给声明番茄生产单元的源头取水
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
输出
产品流
流:可销售新鲜番茄(marketable_tomato_output)
可销售番茄是在声明农场门或包装厂门交付的合格产品,按批次、采收轮次和等级核算。
-
选定流:番茄
43dac9a5-d7b1-4536-84f3-38fa2f56562e -
流属性/单位:Mass / kg 原始产出计量与核对要求:汇总分级后及已纳入清洗或冷却后的净合格质量,排除包装皮重。
-
数量规则:1000 千克
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:参考流(
reference_flow) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_harvest_records -
数量范围:可销售产量筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:10
- 上限:300
- 单位:tonnes/ha per crop cycle
- 基准:声明生产单元的合格新鲜番茄产出
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
废物流
流:番茄藤蔓和作物残体(crop_residue_output)
按去向记录离开生产单元的藤蔓、叶、根、基质残体和其他作物生物量,包括还田、堆肥、饲料利用、处理或处置。
-
选定流:番茄作物残余物
-
流属性/单位:Mass / kg wet biomass
-
数量规则:依据采收记录和残体管理作业测量或计算残体质量,保留水分基准。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:参考流(
reference_flow) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_residue_fate_records -
数量范围:作物残体筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0.1
- 上限:8
- 单位:kg wet residue/kg accepted tomatoes
- 基准:采收和终止后离开生产单元的作物生物量
- 基准类型:参考流(
reference_flow) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
基本流
流:土壤直接氧化亚氮排放(direct_soil_n2o_emission)
依据声明氮投入和选定排放方法估算受管理土壤或生长介质的直接氧化亚氮。
-
选定流:番茄管理土壤一氧化二氮向空气排放
-
流属性/单位:Mass / kg N2O
-
数量规则:对测量或计算的氮投入应用一种声明方法,避免在土壤和排水记录中重复计算同一路径。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_nutrient_records -
来源:
ipcc-2019-managed-soils -
数量范围:直接 N2O 筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:100
- 单位:kg N2O/ha per crop cycle
- 基准:声明氮投入的受管理土壤直接排放估算
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
流:养分使用的氨排放(ammonia_emission)
当声明的养分方法估算肥料或有机养分产品挥发时,记录氨排放。
-
选定流:番茄生产氨向空气排放
-
流属性/单位:Mass / kg NH3
-
数量规则:根据声明氮投入和排放方法计算,保持产品、施用和环境条件可追溯。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_nutrient_records -
来源:
ipcc-2019-managed-soils -
数量范围:氨筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:80
- 单位:kg NH3/ha per crop cycle
- 基准:声明养分投入的挥发估算
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
流:水体硝酸盐损失(nitrate_loss)
当声明生产单元的排水、淋失或径流被测量或估算时,记录硝酸盐损失。
-
选定流:番茄生产硝酸根流失
-
流属性/单位: Mass / kg NO3-
-
数量规则:使用测量排水或声明的氮平衡方法,记录受纳介质、排水比例和养分基准。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:同一作物周期每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:过程输出(
process_output) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_irrigation_records -
来源:
ipcc-2019-managed-soils;fao-greenhouse-vegetables-2013 -
数量范围:硝酸盐损失筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:250
- 单位:kg N/ha per crop cycle
- 基准:声明单元排水、淋失或径流中的硝酸盐损失
- 基准类型:作物周期(
crop_cycle) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
最终交换为 kg NO3-。该物种的元素氮活动量以及按氮计的因子/范围保留在独立计算台账。归一化前将该物种的氮质量乘 62/14,仅换算一次;化合物质量不得再次换算,按氮计的范围不得直接校验化合物质量。未经有据拆分,不得将总氮损失作为该物种。保留实际接收环境与方法边界;未知身份或活动量不等于零。
过程:番茄采收与门点准备(harvest_and_gate_preparation)
输入
产品流
流:采收和门点准备电力(gate_preparation_electricity)
当分选、清洗、冷却、分级、包装和其他门点前处理发生在声明门点之前时,记录其用电。
-
选定流:电力供应
-
流属性/单位:Energy / kWh
-
流集分组:
electricity-supply -
数量规则:汇总纳入的门点前作业分表或发票记录,并分配至处理的番茄批次。
-
数值来源模式:前景记录(
foreground_record) -
适用范围:技术特定(
technology_specific) 原始活动或阶段基准:每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:参考流(
reference_flow) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_gate_energy_records -
数量范围:门点准备电力筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:120
- 单位:kWh/tonne accepted tomatoes
- 基准:纳入的清洗、分级、冷却和包装作业
- 基准类型:参考流(
reference_flow) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
流:清洗或工艺用水(washing_process_water)
当清洗或调理作业在声明门点之前发生时,用水跨越边界。清洗为可选过程,必须披露。
-
选定流:生产用水
-
流属性/单位:Volume / m3
-
流集分组:
process-water -
数量规则:汇总计量或文件化清洗水量,并分别保留重复使用、处理和排放部分。
-
数值来源模式:前景记录(
foreground_record) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:参考流(
reference_flow) -
证据类型:采集记录(
collected_record) -
采集协议:
cp_washing_records -
来源:
codex-cxs-293-2008 -
数量范围:清洗水筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:3
- 单位:m3/tonne accepted tomatoes
- 基准:声明门点前的可选清洗和调理
- 基准类型:参考流(
reference_flow) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
废物流
基本流
输出
废物流
流:送处理的废水(wastewater_output)
当清洗或调理废水排入处理服务或其他有记录的路线时,废水离开门点前操作。
-
选定流:番茄整理废水
-
流属性/单位:Volume / m3
-
数量规则:扣除重复使用、蒸发和截留固体后记录排放废水,并识别受纳处理路线。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:参考流(
reference_flow) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_washing_records -
数量范围:废水筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:3
- 单位:m3/tonne accepted tomatoes
- 基准:纳入调理作业排放的废水
- 基准类型:参考流(
reference_flow) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
流:清洗固体和修整废物(wash_trim_waste)
记录分级或清洗去除的土壤、叶、茎、受损果和其他固体,并记录处理或处置路线。
-
选定流:番茄清洗及修整废物
-
流属性/单位:Mass / kg wet waste
-
数量规则:称量或计算纳入调理过程中去除的固体,并与合格产品和拒收果核对。
-
数值来源模式:计算值(
calculated_value) -
适用范围:场址特定(
site_specific) 原始活动或阶段基准:每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:参考流(
reference_flow) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_washing_records -
数量范围:清洗和修整废物筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:80
- 单位:kg wet waste/tonne accepted tomatoes
- 基准:纳入分级和清洗过程中去除的固体
- 基准类型:参考流(
reference_flow) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
过程:至声明门点的购入运输(purchased_transport_to_gate)
输入
产品流
流:至声明门点的公路货运(road_freight_to_gate)
当第三方服务在交付前将番茄、包装或生产材料运至声明门点时纳入购入公路运输。
-
选定流:公路货运服务
-
流属性/单位:Transport service / tonne-kilometre
-
流集分组:
road-freight-transport -
数量规则:记录装载质量、路线距离、返程或回程假设、车辆或服务类型及运输材料,并计算吨公里。
-
数值来源模式:计算值(
calculated_value) -
适用范围:路线特定(
route_specific) 原始活动或阶段基准:每 1,000 kg 合格新鲜番茄. -
归一化基准:每声明的参考流
-
基准类型:运输服务(
transport_service) -
证据类型:由采集记录计算(
calculated_from_collection) -
采集协议:
cp_transport_records -
数量范围:公路运输筛查区间
- 范围角色:QA 校验(
qa_guardrail) - 下限:0
- 上限:500
- 单位:km per declared tomato lot
- 基准:生产单元或包装厂至声明门点的路线距离
- 基准类型:运输服务(
transport_service) - 证据类型:推理估算(
reasoned_estimate)
- 范围角色:QA 校验(
废物流
基本流
输出
产品流
废物流
基本流
7. 分配与共产品处理
| 规则编号 | 适用对象 | 规则 | 来源 |
|---|---|---|---|
allocation_accepted_and_rejected | 合格番茄、降级果和拒收果 | 使用质量核算结果将共享作物周期投入首先分配给声明的合格番茄产出。单独报告降级和拒收果;只有存在有证据的生产性接收方时才使用经济或物理分配。 | iso-14044-2006; codex-cxs-293-2008 |
allocation_multiple_varieties | 多种番茄类型、品种或采收期 | 当投入制度、路线、等级或市场状态不同时保持类型和采收期分开。汇总时按测量质量或其他声明的物理关系分配共享作业并保留拆分证据。 | iso-14044-2006 |
allocation_reusable_packaging | 可重复使用周转箱、托盘和容器 | 按文件化重复使用次数及声明的容量或质量基准分配包装负担。门点可归属时纳入回收和损失记录。 | iso-14044-2006; codex-cxs-293-2008 |
allocation_residue_use | 作物残体、清洗固体和废水固体 | 将残体处理和生产性利用与合格产品分开。只有接收方、用途、替代声明和分配方法有记录时才分配抵扣。 | iso-14044-2006; fao-tomato-good-agricultural-practices |
具体身份卡不继承原集合卡的数量范围。实际数量由原始记录、库存/计量对账及声明参考流计算;在取得对应身份、单位、期间和边界一致的证据前,不提供默认量或数值筛查范围。缺少范围是质量披露项,并非零投入或完整性证明。
| rule_id | Applies to | Rule | source_ids |
|---|---|---|---|
allocation_residual_precedence | 未规定主方法分支的剩余共同负担 | 本 PCR 要求研究作联产品分配决策但未规定主方法的地方,统一执行以下优先顺序;已明确规定的类别专属主方法保持有效。先直接归属可分开的产出专属作业。剩余共同负担 B 只有在实测作业或生物服务记录证明驱动量 d_i 代表因果消耗时,才采用该物理驱动。产品可称量、有价值或等级较低本身均不构成因果依据,不能在面积、时间、质量和收入间任意切换。可比等级接受相同共同搬运服务时,仅在服务需求、状态及水分基准可比且有据时采用实测处理质量。份额 a_i=d_i/sum(d_j),B_i=Ba_i。该共同作业没有可辩护的因果物理驱动时,采用同交接点、同期间经济份额 a_i=(q_ip_i)/sum(q_j*p_j),纳入全部独立预期产出,匹配数量/价格单位、币种和代表性价格,使用产出专属下游加工之前的价值。缺价格或分母证据使分配结果不完整,不能把产品价格记零或改称单一产出系统。披露合计为一的份额和重要替代方法敏感性;敏感性方法不是可任意替换的主结果。废物、留存残余和内部转移不获得联产品份额,其应归属的生产/处理负担仍保留在产出可售产品的路线中。未分配物理数量和质量平衡另行保留。本分支不自动给予替代信用;单独界定的替代情景须保留总清单及实际被替代功能证据。 | ghg-protocol-product-standard-2011 |
8. 前景数据采集、计算与质量规则
完成数据集前确认具体投入身份
依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。
| requirement_id | collection_protocol_id | 保留的采集范围 |
|---|---|---|
crop_protection_input_specific_input | cp_crop_protection_records | 作业 crop_management:购入并施用于声明番茄作物的植保产品跨越边界。活性成分和配方产品信息分开记录。 原数量方法:按产品、活性成分、处理面积和作物周期汇总发票及施用日志,保留浓度和时间。 |
mobile_machinery_fuel_specific_input | cp_energy_records | 作业 crop_management:按作业和生产单元记录拖拉机、喷雾器、采收辅助设备、叉车和其他移动机械燃料。 原数量方法:按作业汇总交付记录或机械燃料日志,保留燃料类型和换算基准。 |
rigid_primary_packaging_specific_input | cp_packaging_records | 作业 harvest_and_gate_preparation:当可重复使用或一次性周转箱、纸箱、托盘和其他刚性一次包装在门点前供应或消耗时记录。 原数量方法:记录包装类型、质量、容量、重复使用次数、回收率和番茄批次归属。 |
先按各采集协议保留原始场址、批次、周期及阶段数量与分母,并完成库存、损失、含水率和共产品归属核对;随后按实际归属的验收交付产品量归一化:归一化交换量 = 归属原始交换量 × 声明参考数量 / 同一边界和计量基准的验收产品量。多年生建植和共享作业先执行各自分摊规则,不得把内部转移数量设为最终参考数量。每声明的参考流指第 3 节的数量、单位和产品状态;数据包必须声明实际路线和门。
数据采集协议
| protocol_id | process_id | flow_role | record_type | raw_fields | collection_method | unit | frequency | temporal_coverage | site_scope | aggregation_rule | quality_evidence |
|---|---|---|---|---|---|---|---|---|---|---|---|
cp_establishment_records | crop_establishment | seed, transplants, planting water, planting losses | supplier lot, planting log, establishment log | lot id; material form; mass or viable count; variety; planting date; area; unused and failed material | reconcile supplier records to planting-unit logs and retain lot documents;原始汇总与分配:aggregate by planting campaign and production unit | kg, plant, seed, m3, ha | each lot and planting event | complete crop-cycle establishment period | each field, compartment, hydroponic unit, or substrate unit | 每声明的参考流 | supplier invoice; planting log; lot traceability |
cp_irrigation_records | crop_establishment or crop_management | irrigation, fertigation water, source withdrawal, drainage | meter record, water balance, fertigation log | source; meter reading; delivered volume; rainfall; recirculation; drainage; discharge; area; date ;期初/期末累计读数、时间、水表位置/单位/回零、外部流入和回水、输配损失、期初/期末蓄水,田间排水单列 | read meters or reconstruct a documented water balance and reconcile source and delivered volumes;原始汇总与分配:sum by crop cycle and retain source and receiving-medium split ;按水量计算规则分别核对供水管网与田间边界。 | m3, mm, ha | each irrigation event or daily total | full crop cycle | each irrigation zone and production unit | 每声明的参考流 | meter calibration; water-balance closure; operator log |
cp_nutrient_records | crop_establishment or crop_management | nutrient products and calculated emissions | invoice, label, nutrient plan, application log | product; formulation; mass; nutrient concentration; date; area; application method; soil or drainage condition | reconcile purchase, storage, and application records; calculate nutrient equivalents;原始汇总与分配:aggregate by product, nutrient, and crop cycle | kg product, kg N, kg P2O5, kg K2O | each application | full crop cycle | each production unit and nutrient zone | 每声明的参考流 | label or supplier specification; nutrient-plan review |
cp_crop_protection_records | crop_management | crop-protection products | application log and supplier record | product; active ingredient; concentration; mass or volume; date; treated area; application purpose | reconcile application logs with supplier records and crop-protection plan;原始汇总与分配:aggregate by product and active ingredient per crop cycle crop_protection_input_specific_input: 作业 crop_management:购入并施用于声明番茄作物的植保产品跨越边界。活性成分和配方产品信息分开记录。 原数量方法:按产品、活性成分、处理面积和作物周期汇总发票及施用日志,保留浓度和时间。 依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。 | kg, L, ha | each application | full crop cycle | each field, compartment, or crop zone | 每声明的参考流 | operator record; product label; application authorization |
cp_energy_records | crop_management | machinery fuel and production electricity | fuel log, meter, invoice, equipment log | carrier; quantity; meter; operation; equipment; production unit; date; allocation basis | read meters or reconcile delivery and equipment records to included operations;原始汇总与分配:sum by carrier, operation, and crop cycle mobile_machinery_fuel_specific_input: 作业 crop_management:按作业和生产单元记录拖拉机、喷雾器、采收辅助设备、叉车和其他移动机械燃料。 原数量方法:按作业汇总交付记录或机械燃料日志,保留燃料类型和换算基准。 依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。 | L, kg, kWh, MJ | each delivery, meter period, or operation | full crop cycle | each production unit and included service | 每声明的参考流 | meter record; invoice; conversion record |
cp_harvest_records | crop_management | accepted, downgraded, rejected, and harvested tomatoes | harvest ticket, scale record, grading record | date; lot; harvest round; gross mass; accepted mass; grade; rejected mass; packaging tare; gate state | use calibrated scale and lot-level grading reconciliation;原始汇总与分配:sum harvest rounds and reconcile gross, accepted, rejected, and tare masses | kg, percent | each harvest lot | full harvest campaign | each field, compartment, and pack-house line | 每声明的参考流 | scale check; grading record; lot traceability |
cp_residue_fate_records | crop_management | vines, roots, substrate residue, and crop residues | residue log, contractor ticket, treatment record | residue type; wet mass; moisture; date; fate; recipient; transport; treatment | weigh or calculate residue and retain fate evidence;原始汇总与分配:aggregate by fate and crop cycle | kg, percent, km | each removal or treatment event | crop termination and residue handling period | each production unit | 每声明的参考流 | weighbridge or contractor record; recipient declaration |
cp_washing_records | harvest_and_gate_preparation | washing water, wash solids, wastewater, and trimming rejects | water meter, wash log, waste ticket, drain record | lot; water in; reuse; discharge; solids; rejected fruit; date; line; treatment route | reconcile input water, reused water, discharged wastewater, solids, and product output;原始汇总与分配:aggregate by tomato lot and gate period | m3, kg | each lot or operating shift | all included pre-gate conditioning | each washing or conditioning line | 每声明的参考流 | meter record; waste ticket; mass-balance check |
cp_gate_energy_records | harvest_and_gate_preparation | sorting, cooling, and packing electricity | sub-meter, invoice, equipment log | line; operation; kWh; date; lot throughput; allocation basis | allocate metered energy to included tomato throughput and retain line records;原始汇总与分配:sum by operation and tomato lot | kWh, kg | each shift or meter period | all included pre-gate operations | each pack-house line | 每声明的参考流 | sub-meter or invoice; throughput record |
cp_packaging_records | harvest_and_gate_preparation | rigid packaging, crates, and pallets | packaging specification, issue log, return log | package type; material; tare; capacity; count; reuse cycles; return; loss; lot | reconcile package issue and return records to lot throughput and declared reuse basis;原始汇总与分配:allocate by capacity or documented mass basis rigid_primary_packaging_specific_input: 作业 harvest_and_gate_preparation:当可重复使用或一次性周转箱、纸箱、托盘和其他刚性一次包装在门点前供应或消耗时记录。 原数量方法:记录包装类型、质量、容量、重复使用次数、回收率和番茄批次归属。 依据供应商规格、设备及原始记录确认本作业的实际投入。这是必需的采集要求,不是一条交换。完成数据集前,每种实际材料、配方产品、载能体或独立外购服务须分别建立物理身份具体的卡片,并记录原生数量及属性;核验兼容UUID,或明确保留未解析身份且不得宣称数据集已完整链接。不以条件式示例替代未知实际投入,不编造配方,不漏掉必需用量,不由缺失记录推定零消耗。共用投入、复用资产及服务包含项仅归属一次,保留原有阶段、期间及衔接最终参考产出的实测吞吐。原集合范围不作为单项投入上限或用量默认值。 | kg, item, cycle | each issue and return event | full included gate period | each pack-house and transport route | 每声明的参考流 | supplier specification; issue and return log |
cp_transport_records | purchased_transport_to_gate | purchased road freight | transport order, bill, route record | material; loaded mass; origin; destination; distance; vehicle or service; return assumption; date | calculate tonne-kilometres from verified route and loaded mass;原始汇总与分配:aggregate by material and tomato lot | tkm, kg, km | each shipment | all included pre-gate shipments | each route and declared gate | 每声明的参考流 | bill of lading; route record; mass record |
cp_phase1_environment_coverage | crop_establishment | 按实际节点的管理环境覆盖 | 场址活动方法台账 | 场址及实际管理节点;面积;有日期占用区间;共同使用者;建植/未产期历史;实际前后土地类别及转化日期/面积;碳核算覆盖;上游土地覆盖 | 按实际负责生产节点及匹配批次/期间采集原始记录,保留来源、方法适用性和不确定性。与现有协议及供应覆盖核对,不新增重复事件;不适用须明示有据,缺少证据属于缺口。 | 适用的原生活动单位、kg N或物质、面积/时间 | 事件及年度/批次核对 | 匹配生产/队列期间 | 全部实际管理生产节点 | 执行适用覆盖核算后最终归一化一次 | 原始记录、方法工作表及适用性证据 |
计算规则
| rule_id | Applies to | Formula or rule | Inputs | Output | source_ids |
|---|---|---|---|---|---|
calc_accepted_output | accepted tomato reference flow | 按采收批次汇总分级及已纳入清洗或冷却后的净合格番茄质量,排除包装皮重。 | harvest tickets; scale records; grade records; package tare | kg accepted tomatoes | codex-cxs-293-2008 |
calc_mass_reconciliation | harvest and gate preparation | 总采收质量 = 合格质量 + 降级或拒收果 + 修整物和异物 + 已测工艺损失;调查未解释残差。 | gross mass; accepted mass; reject mass; trim; loss; moisture basis | reconciled tomato mass balance | mass-balance-identity |
calc_nutrient_equivalents | nutrient products | 养分质量 = 配方产品质量 × 文件化养分浓度;分别保留产品和养分基准。 | product mass; label or supplier concentration; application date | kg N, kg P2O5, and kg K2O | fao-greenhouse-vegetables-2013 |
calc_water_balance | irrigation and washing water | 逐个识别累计水表,期间水量 = 期末读数 - 期初读数,仅按有文件的回零、溢出及水表单位修正;保留两端读数、时间和水表位置。不同测点的源头总取水 W 与供水 D 分开保留。供水管网边界满足 W + 其他外部流入 = D + 向边界外的回水或排放 + 输配损失 + 期末蓄水 - 期初蓄水。边界内循环水相互抵销,不是新增取水,也不直接从总取水扣减。田间排水另属田间水量平衡,不得再次加到已经计量的供水量上。保留实测值并调查差额;缺读数不能推断零用水。 | meter readings; delivery; rainfall; recirculation; drainage; storage change | m3 source withdrawal and delivered water | fao-crop-evapotranspiration-56 |
calc_crop_cycle_normalization | all crop-cycle amounts | 归一化数量 = 记录或计算数量 ÷ 合格番茄产出 × 1,000 kg;保留生产单元和作物周期分母。 | recorded amount; accepted output | amount per 1,000 kg accepted tomatoes | mass-balance-identity |
calc_nitrogen_emissions | direct and indirect nitrogen emissions | 对文件化氮投入、土壤或基质条件、排水和残体去向应用一种声明的 IPCC 兼容或辖区方法,不叠加重叠因子。 | kg N applied; method factors; drainage; residue fate | kg N2O, NH3, or nitrate loss by receiving medium | ipcc-2019-managed-soils |
calc_reusable_packaging | reusable crates and pallets | 包装分配负担 = 件负担 ÷ 文件化重复使用次数 × 按容量或声明质量基准确定的番茄批次份额。 | item mass; reuse cycles; lot capacity or mass; return and loss records | kg packaging allocated to tomato lot | iso-14044-2006 |
calc_transport_service | purchased road freight | 运输服务 = 吨计装载质量 × 已核实路线公里;另行报告返程或回程假设。 | shipment mass; route distance; service record | tonne-kilometres | fao-tomato-good-agricultural-practices |
seed_or_transplant_input_identity_and_fate | crop_establishment | 对于本作业原有 seed_or_transplant_input 采集角色,建立交换前须确定实际物理形态、物种/材料、组成、状态及供给/处理边界。与该角色相关且实际使用/产生的各种种子批次、移栽苗、根冠、插条、幼虫阶段、配方、包衣、保藏剂或分离残余物须各有具体卡片;这些例子是备选,不是必需配方。保留原采集记录和路线特定来源证据。计数种植记录匹配按质量的供应数据时,须使用实测或供应商支持的单位质量;计数与质量是关联属性,不是两次采购。不得合并独立果壳/外皮或不同药剂;真实混合物流须有组成与接收者证据且只计一次。完整性通过前,记录每项适用数量和原生单位、链接相容的已核验 UUID 或明确未解析身份,保留库存/退回归属,并将可归属原始数量按合格参考产出归一化一次。缺失记录不是零,原聚合范围不是单项投入默认值。 | cp_establishment_records | 按身份区分的交换和对账活动记录 | |
chemical_species_mass_accounting | elementary_nutrient_emissions | 最终基本交换使用已识别物质的质量和一个实际接收环境,养分/活动台账另存:该物种的 N2O-N × 44/28 为 N2O,NH3-N × 17/14 为 NH3,硝酸盐氮 × 62/14 为硝酸盐,磷酸盐磷 × 95/31 为磷酸盐。若选定流为元素磷,则报告 kg P,仅在物种口径有据时将磷酸盐质量乘 31/95。只有方法输出按元素计时才换算一次,实测化合物质量不得再换算。总养分损失不得无据归于单一物种,土壤残余/留存养分不是排放。保留直接/间接路径台账,不重复所选方法或上游清单已经包含的路径。因子不确定性范围只按其声明基准检查因子,不是最终化合物数量或场址排放的允许界限。用合格参考数量和匹配实测产出,将可归属化合物质量归一化一次。活动量、身份或接收环境未知时保留证据缺口,不得宣称完整。 | cp_nutrient_records; cp_irrigation_records; 物种特定活动量台账、方法路径和因子基准、匹配合格产出 | 按身份区分的交换和对账活动记录 | |
rejected_tomato_output_identity_and_fate | crop_management | 原作业产生相关物料时,rejected_tomato_output 的采集职责必须履行。每种物理上独立的物流须分别记录实际材料、组成、状态、实测质量与去向。粉尘、糠壳、籽粒、包装及产品拒收物不能仅因在同一作业产生而共用交换;真实混合物流仅在组成和处理边界有据时可单列一张卡。降级农产品须区分具有接收者和用途证据的预期可销售联产品与实际送处理的废物;等级较低本身不决定废物属性或分配。场内返工/回用和留田生物量保留在对账的内部台账,不作为外运废物。完整性通过前须按实际属性建立具体产品或废物卡,使用相容的已核验 UUID 或明确未解析身份;保留可归属负荷,不作无据替代抵扣,各物流不得双计。实测量仅按原有合格参考产出归一化一次。身份、数量或去向缺失时不得宣称完整,不推定聚合默认量或数值界限。 | cp_harvest_records | 按身份区分的交换和对账活动记录 | codex-cxs-293-2008; usda-ams-tomato-grade-standard |
环境覆盖计算规则
| rule_id | Applies to | Formula or rule | Inputs | Output | source_ids |
|---|---|---|---|---|---|
calc_managed_land_coverage | 实际管理生产节点 | 逐实际自主管理生产场址采集占用面积及有日期的占用区间,包括应归属的建植/未产期与生产期。占用量为面积乘实际时长,明确换为所选面积时间单位(1 ha=10,000 m2,时间按年);只有每作物周期公顷数而无时长不能得到面积时间。建立、管理区间重叠时划分区间或取并集,同一面积时间只计一次,实际共同使用者份额合计为一。土地转化按声明土地利用方法,另记实际前/后土地类别、事件面积和日期;转化使用面积单位,不能与占用量相加。种植、持续占用或前土地资料缺失不能证明发生转化,也不能证明零转化。适用时保留历史事件归属及碳库/排放方法覆盖,不编造转化或通用固碳信用。分别建立兼容基本流身份,采用已核实UUID或明确未决身份,归属一次后按匹配最终参考产出归一化。外购已完成的生物投入承接兼容上游土地覆盖一次,不在本地重复。适用土地身份、面积、时长或前状态证据缺失属于完整性缺口;有据无转化可记录为不适用。 | cp_phase1_environment_coverage | 按匹配最终参考量的应归属原生环境数量 |
数据质量要求
| requirement_id | Applies to | Requirement | Evidence |
|---|---|---|---|
quality_identity_qualifiers | reference flow and all product lots | 声明番茄类型、品种组、路线、地理位置、门点、成熟度、等级和包装状态;平台时保留该状态供前景解析。 | lot metadata; product specification; gate record |
quality_mass_closure | harvest, rejects, residues, washing, and wastewater | 每个作物周期关闭产品和过程质量平衡,或记录未解释差异及其对归一化值的影响。 | calibrated scale; mass-balance worksheet; waste ticket |
quality_temporal_coverage | crop-cycle inputs and outputs | 覆盖从栽植到门点的完整周期及每个采收轮次;识别缺失时段、替代值和平均窗口。 | planting log; harvest log; meter periods |
quality_route_disclosure | open-field, greenhouse, hydroponic, and substrate production | 在纳入时识别路线、占用面积、基础设施归属、循环、加热、照明、基质、排水和作物终止处理。 | production-unit record; equipment log; route declaration |
quality_nutrient_traceability | nutrient inputs and nitrogen emissions | 每个养分值连接到产品记录、浓度、施用日志和声明的排放方法;区分产品质量与养分质量。 | invoice; label; nutrient plan; calculation worksheet |
quality_water_traceability | irrigation, withdrawal, washing, and drainage | 识别来源、计量或水量平衡方法、交付量、循环、排水、排放和受纳介质。 | meter record; water-balance closure; discharge record |
quality_reject_and_residue_fate | downgraded fruit, crop residue, wash solids, and wastewater | 为每个非产品流记录测量数量、相关水分基准、去向、处理、运输和接收方证据。 | waste ticket; contractor record; recipient declaration |
quality_energy_and_transport | fuel, electricity, and purchased transport | 保留载体或服务类型、数量、作业、路线、日期、计量或运输证据和分配基准。 | invoice; meter record; bill of lading; route record |
9. 校验规则
| 规则编号 | 适用对象 | 规则 | 来源 |
|---|---|---|---|
validation_reference_mass | reference flow and accepted output | 归一化参考量必须为 1,000 kg 净合格番茄,并保留已按 CPC 3.0 01234 完成平台核验的参考产品身份。 | codex-cxs-293-2008 |
validation_mass_reconciliation | harvest and gate-preparation inventory | 检查合格产出、降级或拒收果、残体、修整物、废水固体和工艺损失是否在记录的测量容差内与总采收或接收质量一致。 | mass-balance-identity |
validation_crop_cycle_completeness | crop establishment and crop management | 对缺少声明栽植批次、采收轮次或路线投入,且没有合理零值或文件化排除的数据集予以拒绝。 | fao-tomato-good-agricultural-practices |
validation_nutrient_basis | nutrient products and emissions | 接受氮、氨或硝酸盐数值前,检查产品质量、养分浓度、养分数量、施用时间和排放方法。 | ipcc-2019-managed-soils |
validation_water_balance | irrigation, source withdrawal, washing, and drainage | 检查单位、来源、计量或平衡时段、交付水、循环、排放和受纳介质;调查负值或未解释的平衡。 | fao-crop-evapotranspiration-56 |
validation_gate_state | reference product and process boundary | 检查清洗、冷却、包装、运输和包装厂作业仅在声明门点前发生时纳入,并在元数据中披露。 | codex-cxs-293-2008; usda-ams-tomato-grade-standard |
validation_range_screen | all important inventory rows | 将场址值与行范围或文件化证据比较;超出范围必须说明、更新证据或明确声明情景。 | codex-cxs-293-2008; fao-greenhouse-vegetables-2013 |
validation_residue_fate | rejects and residues | 为每种拒收果、作物残体、清洗固体和废水要求去向和目的地;没有文件化生产性利用不得施加抵扣。 | iso-14044-2006 |
10. 发布数据集画像
| 字段 | 值 |
|---|---|
| dataset_role | 可发布为 secondary_dataset 的番茄生产前景数据集,用作有文件记录的农业生产投入 |
| downstream_use | 在门点、路线、地理位置、时期和产品限定信息兼容时,用于鲜食完整番茄供应的下游过程和生命周期模型构建 |
| allowed_use | 当作物周期完整性、门点状态、路线、质量核对、养分基准、水量平衡和残体去向得到披露时,用于比较或归因 LCA |
| excluded_use | 没有明确转换或重新分配模型时,用于罐藏、干制、榨汁、果泥、浓缩、烹饪、零售、消费者或实质不同的番茄路线 |
| required_metadata | canonical PCR id;参考数量;番茄类型和品种组;地理位置;生产路线;栽植和采收日期;门点;成熟度和等级;合格、拒收、残体和废水质量;灌溉来源和方法;养分基准;植保方案;能源和运输;包装和重复使用;平台身份解析状态 |
| required_quality_disclosure | 时间覆盖;场址和生产单元覆盖;计量和质量平衡闭合;路线和技术;水和养分证据;残体去向;缺失数据;使用的范围;分配;不确定性字段 |
| update_trigger | 新生产路线、灌溉或施肥灌溉重大变化、加热或照明、植保制度、等级或门点定义、包装系统、残体去向、来源方法或已验证产品及流身份 |
11. 数据源
| source_id | type | reference | used_for |
|---|---|---|---|
codex-cxs-293-2008 | standard | FAO/WHO Codex Alimentarius, Standard for Tomatoes (CXS 293-2008), https://www.fao.org/fao-who-codexalimentarius/sh-proxy/hu/?lnk=1&url=https://workspace.fao.org/sites/codex/Standards/CXS%20293-2008/CXS_293e.pdf; retrieved 2026-09-14 | 产品定义、商业类型、成熟度、质量、门点调理和等级证据 |
usda-ams-tomato-grade-standard | official_guidance | USDA Agricultural Marketing Service, Tomato Grades and Standards, https://www.ams.usda.gov/grades-standards/tomato-grades-and-standards; retrieved 2026-09-14 | 等级、成熟度、清洁度、缺陷和拒收分类 |
fao-tomato-good-agricultural-practices | official_guidance | FAO, Manual de buenas prácticas agrícolas en la cadena del tomate, https://www.fao.org/family-farming/detail/es/c/286792/; retrieved 2026-09-14 | 番茄过程分解、作物管理、植保、残体和运输实践 |
fao-greenhouse-vegetables-2013 | official_guidance | FAO, Good Agricultural Practices for greenhouse vegetable crops, https://www.fao.org/4/i3284e/i3284e.pdf; retrieved 2026-09-14 | 温室、施肥灌溉、供水、养分、电力、排水和路线方法 |
fao-crop-evapotranspiration-56 | official_guidance | FAO Irrigation and drainage paper 56, Crop evapotranspiration, https://www.fao.org/4/X0490E/X0490E00.htm; retrieved 2026-09-14 | 灌溉计量和水量平衡方法 |
ipcc-2019-managed-soils | method_factor | IPCC, 2019 Refinement to the 2006 IPCC Guidelines, Volume 4, Chapter 11, https://efdb.ipcc-nggip.iges.or.jp/public/2019rf/vol4.html; retrieved 2026-09-14 | 氮排放方法和受管理土壤边界 |
iso-14044-2006 | standard | ISO 14044:2006, Environmental management — Life cycle assessment — Requirements and guidelines, https://www.iso.org/standard/38498.html; retrieved 2026-09-14 | 分配、共产品、归因和数据质量原则 |
mass-balance-identity | method_factor | PCR mass-balance reconciliation method: gross received or harvested mass equals accepted product plus separately recorded downgraded, residue, treatment, and unexplained loss streams | 计算和校验质量闭合 |
fao-fertilizer-identities | official_guidance | FAO Fertilizer Specifications, https://www.fao.org/agriculture/crops/thematic-sitemap/theme/spi/plantnutrition/fertspecs/en/ | 条件性具体身份和方法依据;不证明场址使用,也不设定用量 |
fao-organic-nutrients | official_guidance | FAO How to Make and Use Compost, https://www.fao.org/4/i2230e/i2230e.pdf | 条件性具体身份和方法依据;不证明场址使用,也不设定用量 |
route-energy-fao | official_guidance | FAO, Energy-smart food for people and climate (2011), Annex 2; and Energy use in agriculture and industry, Annex IV. https://www.fao.org/4/i2454e/i2454e00.pdf ; https://www.fao.org/4/Q1085e/q1085e0d.htm | 仅支持设备及载能体可能性,适用性由现场记录确定;不采用能耗强度、燃料比例或默认组合。 |
ghg-protocol-product-standard-2011 | standard | WRI/WBCSD, Product Life Cycle Accounting and Reporting Standard (2011), Chapter 9, https://ghgprotocol.org/sites/default/files/standards/Product-Life-Cycle-Accounting-Reporting-Standard_041613.pdf | 一般分配优先顺序及可比交接点经济价值基准。适用条件和明确的剩余分支是本 PCR 的方法约定;该来源不规定本产品因果系数、价格或产出数量。 |
原始下载
以下文件与仓库中该修订的规范化文件逐字节一致,可自行校验哈希。
结构化规则索引
以下索引来自经过校验的 structured.yaml。规则文本保留英文规范源的语言;中文方法学正文见上方。
系统边界规则 · 5
| 规则 ID | 适用对象 | 规则 | 来源 ID |
|---|---|---|---|
boundary_crop_cycle | establishment and crop management | Include production-unit preparation attributable to the crop cycle, planting, crop management, supplied water, nutrient inputs, crop protection, energy, and direct crop emissions. Disclose prior land use and exclude unrelated infrastructure construction. | fao-tomato-good-agricultural-practices, fao-greenhouse-vegetables-2013 |
boundary_route_specificity | open-field, greenhouse, hydroponic, and substrate routes | Keep route-specific infrastructure, heating, pumping, recirculation, substrate, drainage, and crop-cycle records separate when they materially change the inventory. | fao-greenhouse-vegetables-2013 |
boundary_gate_preparation | harvest, grading, washing, cooling, and packing | End the default foreground boundary at the declared farm-gate or pack-house gate. Include grading, washing, cooling, and primary packaging only when they occur before that gate. | codex-cxs-293-2008, usda-ams-tomato-grade-standard |
boundary_nitrogen_emissions | nutrient inputs, soil, drainage, and residues | Estimate applicable direct and indirect nitrogen emissions with one declared method using recorded nutrient inputs, drainage or leaching evidence, and residue fate. Avoid double counting pathways. | ipcc-2019-managed-soils |
boundary_residue_fate | rejected fruit, crop residues, wash solids, and wastewater | Record field return, composting, feed use, treatment, transport, or disposal for each residue stream. A credit requires documented recipient, intended use, and allocation treatment. | fao-tomato-good-agricultural-practices, iso-14044-2006 |
分配规则 · 6
| 规则 ID | 适用对象 | 规则 | 来源 ID |
|---|---|---|---|
allocation_accepted_and_rejected | accepted tomatoes, downgraded fruit, and rejects | Allocate shared crop-cycle inputs first to declared accepted tomato output using measured mass reconciliation. Report downgraded and rejected fruit separately; use economic or physical allocation only when a documented productive recipient exists. | iso-14044-2006, codex-cxs-293-2008 |
allocation_multiple_varieties | multiple tomato types, cultivars, or harvest campaigns | Keep types and campaigns separate when input regimes, route, grade, or market state differ. If aggregated, allocate shared operations by measured mass or another declared physical relationship and retain disaggregation evidence. | iso-14044-2006 |
allocation_reusable_packaging | reusable crates, pallets, and containers | Allocate packaging burdens over documented reuse cycles and declared capacity or mass basis. Include return and loss records when attributable to the declared gate. | iso-14044-2006, codex-cxs-293-2008 |
allocation_residue_use | crop residue, wash solids, and wastewater solids | Keep residue treatment and productive use separate from accepted product. Assign a credit only when recipient, intended use, substitution claim, and allocation method are documented. | iso-14044-2006, fao-tomato-good-agricultural-practices |
allocation_rule_5 | foreground_burden_allocation | Concrete cards do not inherit numerical ranges from the former aggregate card. Determine quantities from original records, stock/meter reconciliation and the declared reference flow; no default quantity or numeric screen is supplied without evidence matching the identity, unit, period and boundary. Missing range evidence is a quality disclosure, not zero use or proof of completeness. | |
allocation_residual_precedence | remaining common burden with no specified primary branch | Resolve any study-specific joint-product instruction in this PCR that has no specified primary branch using this precedence; retain an already explicitly prescribed category-specific primary method. First directly assign separable output-specific activities. For the remaining common burden B, use a physical driver d_i only when measured operation or biological-service records demonstrate the causal consumption represented by that driver. A product being weighable, valuable or lower grade alone is insufficient; do not switch arbitrarily between area, time, mass and revenue. For comparable grades receiving the same common handling, measured processed mass is applicable only with the same service demand, state and moisture basis demonstrated. Share a_i=d_i/sum(d_j); B_i=B*a_i. If no defensible causal physical driver exists for that common operation, use gate- and period-matched economic shares a_i=(q_i*p_i)/sum(q_j*p_j), with the complete independently intended output set, compatible quantity/price units, currency, representative prices and values before output-specific downstream processing. Missing price or denominator evidence makes the allocated result incomplete, not a zero-priced product or a single-output system. Report shares summing to one and sensitivity to a material alternative; an alternative is not an interchangeable primary result. Waste, retained residues and internal transfers receive no co-product share, while their attributable production/handling burdens remain with the producing saleable route. Retain unallocated physical quantities and mass balances separately. This branch gives no automatic substitution credit; any separately scoped substitution analysis retains the gross inventory and its actual displaced-function evidence. | ghg-protocol-product-standard-2011 |
校验规则 · 8
| 规则 ID | 适用对象 | 规则 | 来源 ID |
|---|---|---|---|
validation_reference_mass | reference flow and accepted output | Require 1,000 kg net accepted tomatoes as normalized reference amount and retain the platform-verified reference product identity for CPC 3.0 01234. | codex-cxs-293-2008 |
validation_mass_reconciliation | harvest and gate-preparation inventory | Check that accepted output, downgraded or rejected fruit, residues, trim, wastewater solids, and process losses reconcile with gross harvested or received mass within documented measurement tolerance. | mass-balance-identity |
validation_crop_cycle_completeness | crop establishment and crop management | Reject a dataset that omits a represented planting campaign, harvest round, or route-specific input without a justified zero or documented exclusion. | fao-tomato-good-agricultural-practices |
validation_nutrient_basis | nutrient products and emissions | Check product mass, nutrient concentration, nutrient amount, application timing, and declared emission method before accepting nitrogen, ammonia, or nitrate values. | ipcc-2019-managed-soils |
validation_water_balance | irrigation, source withdrawal, washing, and drainage | Check units, source, meter or balance period, delivered water, recirculation, discharge, and receiving medium; investigate negative or unexplained balances. | fao-crop-evapotranspiration-56 |
validation_gate_state | reference product and process boundary | Check that washing, cooling, packaging, transport, and pack-house operations are included only when before the declared gate and disclosed in metadata. | codex-cxs-293-2008, usda-ams-tomato-grade-standard |
validation_range_screen | all important inventory rows | Compare site values with the row range or documented evidence. Values outside a range require an explanation, revised evidence, or an explicit scenario declaration. | codex-cxs-293-2008, fao-greenhouse-vegetables-2013 |
validation_residue_fate | rejects and residues | Require a fate and destination for each rejected fruit, crop residue, wash solid, and wastewater stream; do not apply a credit without documented productive use. | iso-14044-2006 |
过程与输入输出 · 4
| 过程 ID | 过程名称 | 输入流数量 | 输出流数量 |
|---|---|---|---|
crop_establishment | Tomato crop establishment | 1 | 1 |
crop_management | Tomato crop management | 10 | 5 |
harvest_and_gate_preparation | Tomato harvest and gate preparation | 2 | 2 |
purchased_transport_to_gate | Purchased transport to declared gate | 1 | 0 |
完整字段检查器
按需加载该记录的完整 manifest 与结构化投影;字段值不做截断。需要 JavaScript。