Armoured vehicle environmental surface-finishing account

1. Scope and Applicability

Environmental foreground account for surface finishing of one supplied new complete uncoated non-live motorized armoured vehicle. The factory receives a physically complete unit, records its procurement gate and actual environmental configuration identity, attributes actual conditional cleaning and supplied coating consumption, environmental-control electricity, water, collected wastes and measured releases, then records environmental quality acceptance, independent complete net mass and dispatch. Earlier vehicle and component construction is upstream. This PCR specifies environmental accounting and general metrology only; it provides no vehicle or weapon design, manufacture parameters, assembly sequence, functional details or performance optimization.

Exclude parts-only manufacture or component/weapon integration, design or ballistic/functional testing, armour specifications and operating instructions, ammunition and energetic payload, operation, fuel consumption in service, transport service, refurbishment, dismantling and disposal. Product M excludes external packaging, temporary test/support equipment, operational fuel and live/test payload. This foreground starts with a whole supplied vehicle and is not all vehicle manufacture or complete cradle-to-gate. Any actual additional manufacturing route requires independent applicability and safe evidence review rather than inferred operations.

No material armoured-vehicle environmental method found in the current-worktree manifest scan; old44710 scaffold is not promoted. Ordinary vehicle/tractor methods offer reusable environmental metering and normalization controls but do not establish this supplied complete uncoated non-live starting state and finish-only whole-vehicle reference boundary. This candidate is narrowly bounded by the procurement gate and observed environmental stages, not classification code alone; independent overlap/scientific review remains pending. Military manufacturing or security services are excluded, and no other author unfrozen canonical content was read.

2. Product Category Identity

Field	Value
canonical_pcr_id	pcr.metal-products-machinery-and-equipment.special-purpose-machinery.armoured-vehicle-environmental-manufacturing
classification_refs	CPC:3.0:44710; narrower; no accepted mapping claimed
covered_products	Environmental foreground account for surface finishing of one supplied new complete uncoated non-live motorized armoured vehicle. The factory receives a physically complete unit, records its procurement gate and actual environmental configuration identity, attributes actual conditional cleaning and supplied coating consumption, environmental-control electricity, water, collected wastes and measured releases, then records environmental quality acceptance, independent complete net mass and dispatch. Earlier vehicle and component construction is upstream. This PCR specifies environmental accounting and general metrology only; it provides no vehicle or weapon design, manufacture parameters, assembly sequence, functional details or performance optimization.
excluded_products	Exclude parts-only manufacture or component/weapon integration, design or ballistic/functional testing, armour specifications and operating instructions, ammunition and energetic payload, operation, fuel consumption in service, transport service, refurbishment, dismantling and disposal. Product M excludes external packaging, temporary test/support equipment, operational fuel and live/test payload. This foreground starts with a whole supplied vehicle and is not all vehicle manufacture or complete cradle-to-gate. Any actual additional manufacturing route requires independent applicability and safe evidence review rather than inferred operations.
representative_product	One supplied complete new non-live motorized vehicle at the finishing factory gate; actual environmental configuration declared, no technical design information.
production_route	Incoming environmental ledger and conditional cleaning; Actual surface-finishing environmental ledger; Environmental acceptance, independent net mass and dispatch
market_state	New complete environmentally accepted surface-finished vehicle, external packaging separate.

3. Reference Flow

Field	Value
What	Environmental foreground manufacture-stage surface finishing of one supplied complete vehicle.
How much	1kg accepted complete net vehicle output using independent actual M kg per same-configuration vehicle, not paint mass or pooled parts.
How well	Complete declared non-live supplied configuration, environmental batch/SDS identity and stock/waste closure, original net mass and procurement boundary accepted under current environmental quality plan. No functional/protection performance claim.
How long or cycle	One factory finishing acceptance and dispatch cycle; no service life.
reference_flow_link	finished_machine

Field	Value
Reference amount	1
Reference product flow	Tanks and other armoured fighting vehicles, motorized, and parts thereof df061b40-6778-4622-adba-644b49be3524
Reference flow property	Mass 93a60a56-a3c8-11da-a746-0800200b9a66
Reference unit group	Units of mass 93a60a57-a4c8-11da-a746-0800200c9a66
Reference unit	kg
Required qualifiers	environmental product/configuration ID and serial, complete supplied non-live state, received versus finished net mass and retained coating/fluids convention, supplier gate and transport boundary, individual formulation SDS/batch/state and waste destination, actual site/period/meter voltage, same-configuration accepted count and rejects/rework, original whole-unit calibrated net weighing and independent mass closure, optional pollutant CAS/medium/post-control method/uncertainty, upstream/flow gaps and pending scientific review

4. Measurement and Unit Rules

rule_id	Applies to	Required property	Required unit	Rule
reference_mass	reference product	Mass 93a60a56-a3c8-11da-a746-0800200b9a66	kg	M = accepted net mass of one complete unit of the same configuration in kg; collect using cp_mass.
electricity_energy	prepare_power; finish_power; dispatch_power	Energy 93a60a56-a3c8-11da-a746-0800200c9a66	MJ	Meter actual kWh and multiply by3.6MJ/kWh; record original meter uncertainty and attribution.

5. System Boundary

Boundary Abstraction

Field	Value
declared_starting_condition	Environmental foreground account for surface finishing of one supplied new complete uncoated non-live motorized armoured vehicle. The factory receives a physically complete unit, records its procurement gate and actual environmental configuration identity, attributes actual conditional cleaning and supplied coating consumption, environmental-control electricity, water, collected wastes and measured releases, then records environmental quality acceptance, independent complete net mass and dispatch. Earlier vehicle and component construction is upstream. This PCR specifies environmental accounting and general metrology only; it provides no vehicle or weapon design, manufacture parameters, assembly sequence, functional details or performance optimization.
starting_condition_role	foreground_start
product_classification_scope	CPC3.0:44710; complete non-live vehicle only, no parts pool
recursive_input_rule	Incoming whole vehicle manufacture remains upstream; no engine, armour, weapon or component manufacture invented locally. Match supplier complete-unit content/gate and avoid duplicate upstream components or retained fluid.
upstream_dataset_requirement	Before extension require actual supplied whole-unit identity/state, upstream inventory scope, electricity voltage, supplied coating/cleaner SDS, transport and treatment destination. Unknowns disclosed, no complete cradle-to-gate claim.
disclosure	Exclude parts-only manufacture or component/weapon integration, design or ballistic/functional testing, armour specifications and operating instructions, ammunition and energetic payload, operation, fuel consumption in service, transport service, refurbishment, dismantling and disposal. Product M excludes external packaging, temporary test/support equipment, operational fuel and live/test payload. This foreground starts with a whole supplied vehicle and is not all vehicle manufacture or complete cradle-to-gate. Any actual additional manufacturing route requires independent applicability and safe evidence review rather than inferred operations.

rule_id	applies_to	rule	source_ids
boundary_environment	all processes	Environmental procurement, energy, water, chemical and waste ledgers only. No weapon/vehicle assembly tutorial, technical parameters, protection criteria, function or operating details enter this PCR. Actual additional operations cannot be assumed from historical EA.	air-environment; water-environment; waste-environment
boundary_water	cleaning_effluent	Municipal supply, collected industrial effluent, treatment outputs and actual environmental release are different exchanges. EPA overview applicability depends on actual sector/route/direct discharge; no universal limit prescribed.	discharge-environment

6. Process Inventory Structure

Process Map

process_id	process_name	inclusion	inclusion_condition	role	quantitative_reference
prepare	Incoming environmental ledger and conditional cleaning	required	Receive one physically complete uncoated unit; record whole-unit identity and procurement boundary without internal functional details. Cleaning exchanges only if actual.	foreground_manufacturing	1kg complete accepted vehicle; conditional exchanges only when actual
finish	Actual surface-finishing environmental ledger	required	Attribute actual supplied formulations, environmental utilities, wastes and species-specific post-control releases without prescribing coating recipes, parameters or protective performance.	foreground_manufacturing	1kg complete accepted vehicle; conditional exchanges only when actual
dispatch	Environmental acceptance, independent net mass and dispatch	required	Reconcile accepted same-configuration count, material/waste/utility balances and independent whole net M before external packaging. No functional or operational test specification.	foreground_manufacturing	1kg complete accepted vehicle; conditional exchanges only when actual

Process: Incoming environmental ledger and conditional cleaning (prepare)

Receive one physically complete uncoated unit; record whole-unit identity and procurement boundary without internal functional details. Cleaning exchanges only if actual.

Inputs

Product flows

Supplied complete uncoated non-live motorized armoured vehicle (incoming_vehicle)

One actual whole new incoming unit. Prior construction entirely upstream; environmental configuration ID and original net mass only, no technical or functional detail.

• Selected flow: Supplied complete uncoated non-live motorized armoured vehicle
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_prepare.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_prepare
• Sources:

Tap water (water)

Conditional actual municipal cleaning makeup measured kg. Technosphere supply, not water resource or contaminated discharge.

• Selected flow: Tap water d1e0e36c-07f0-4a75-bdcb-efb5d9e2ac36
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_prepare.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_prepare
• Sources:

Single supplied aqueous industrial cleaning formulation (cleaner)

Only actual identified supplier batch/SDS formulation, received kg and stock closure. Separate distinct supplied chemicals; no composition or dilution instruction.

• Selected flow: Single supplied aqueous industrial cleaning formulation
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_prepare.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_prepare
• Sources:

Alternating current (prepare_power)

Actual below1kV metered environmental-stage demand. No rated equipment power or weapon functional test consumption inferred; attributable environmental utilities only.

• Selected flow: Alternating current 50657322-939c-4829-a87b-47c093bfa6a7
• Flow property / unit: Energy 93a60a56-a3c8-11da-a746-0800200c9a66 / MJ
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_prepare.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_prepare
• Sources:

Waste flows

Elementary flows

Outputs

Product flows

Waste flows

Collected aqueous cleaning effluent sent to industrial treatment (cleaning_effluent)

Conditional one measured contaminated liquid stream with analytical identity and documented treatment recipient, kg. No assumed direct water discharge.

• Selected flow: Collected aqueous cleaning effluent sent to industrial treatment
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_prepare.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_prepare
• Sources:

Elementary flows

Process: Actual surface-finishing environmental ledger (finish)

Attribute actual supplied formulations, environmental utilities, wastes and species-specific post-control releases without prescribing coating recipes, parameters or protective performance.

Inputs

Product flows

Single supplied industrial vehicle primer formulation (primer)

Actual supplied single batch formulation wet kg and SDS, no recipe, grades, coating geometry or application parameters. Multiple separately supplied formulations require separate identities.

• Selected flow: Single supplied industrial vehicle primer formulation
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

Single supplied industrial vehicle finishing-coating formulation (finish_coating)

Actual supplied wet formulation and supplier SDS/lot measured kg, original inventory/returns. No coating recipe, mixing ratio, cure setting or protective performance prescribed.

• Selected flow: Single supplied industrial vehicle finishing-coating formulation
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

Finished glass-fibre paint-exhaust filter pad (filter_pad)

Only when actual installed environmental control uses this specific finished filter medium; received dry kg, supplier formulation/state. Raw glass fibre is not finished filter pad.

• Selected flow: Finished glass-fibre paint-exhaust filter pad
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

Alternating current (finish_power)

Actual below1kV metered environmental-stage demand. No rated equipment power or weapon functional test consumption inferred; attributable environmental utilities only.

• Selected flow: Alternating current 50657322-939c-4829-a87b-47c093bfa6a7
• Flow property / unit: Energy 93a60a56-a3c8-11da-a746-0800200c9a66 / MJ
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

Waste flows

Elementary flows

Outputs

Product flows

Waste flows

Waste paint (paint_residue)

Conditional separately collected wet finishing-paint residue kg with actual SDS/waste classification and recipient. Do not combine primer waste, filters, solvents or wastewater.

• Selected flow: Waste paint 877e5a04-76c8-4c5b-ac4c-062f5beeb2bd
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

Paint-contaminated spent glass-fibre filter pad (spent_filter)

Conditional one spent physical filter stream including retained contaminant, measured outgoing kg and qualified treatment. Captured particles not air emissions.

• Selected flow: Paint-contaminated spent glass-fibre filter pad
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

Elementary flows

Particulate matter, particle size unspecified (particle_air)

Only actual measured post-control release to immediate unspecified ambient air, unspecified particle size. No necessary emission inferred from finishing; captured material separate waste.

• Selected flow: Particulate matter, particle size unspecified 0ce3dedb-caca-407b-a856-a90470eb8ec0
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

xylene (all isomers) (xylene_air)

Only actual supplied chemical identity CAS1330-20-7 and species-specific post-control mass/time evidence to immediate unspecified ambient air. Total VOC is not xylene. Historical2021 VOHAP-free source does not prove xylene present.

• Selected flow: xylene (all isomers) fe0acd60-3ddc-11dd-ad91-0050c2490048
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_finish.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_finish
• Sources:

Process: Environmental acceptance, independent net mass and dispatch (dispatch)

Reconcile accepted same-configuration count, material/waste/utility balances and independent whole net M before external packaging. No functional or operational test specification.

Inputs

Product flows

Alternating current (dispatch_power)

Actual below1kV metered environmental-stage demand. No rated equipment power or weapon functional test consumption inferred; attributable environmental utilities only.

• Selected flow: Alternating current 50657322-939c-4829-a87b-47c093bfa6a7
• Flow property / unit: Energy 93a60a56-a3c8-11da-a746-0800200c9a66 / MJ
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_dispatch.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_dispatch
• Sources:

Low-density polyethylene foil (PE-LD) (film)

Conditional actual noncellular nonadhesive PE-LD external foil kg, outside net M; other real packaging each separately identified.

• Selected flow: Low-density polyethylene foil (PE-LD) 2cecd3a7-d90e-44b4-aec5-1d9dfb907477
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: Apply normalize_mass to q_item; reference_mass; cp_dispatch.
• Value mode: foreground_record
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow; collected per one accepted finished unit
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_dispatch
• Sources:

Waste flows

Elementary flows

Outputs

Product flows

Tanks and other armoured fighting vehicles, motorized, and parts thereof (finished_machine)

Exactly one supplied new complete motorized vehicle after environmental surface finishing, same declared non-live configuration. The public broad identity is restricted here to one complete vehicle, never a mixed parts pool. No live load or functional detail; actual net M kg.

• Selected flow: Tanks and other armoured fighting vehicles, motorized, and parts thereof df061b40-6778-4622-adba-644b49be3524
• Flow property / unit: Mass 93a60a56-a3c8-11da-a746-0800200b9a66 / kg
• Amount rule: 1 kg
• Value mode: fixed_value
• Specificity: site_specific
• Normalization basis: per 1 kg reference flow
• Basis kind: reference_flow
• Evidence kind: collected_record
• Collection protocol: cp_mass
• Sources:

Waste flows

Elementary flows

7. Allocation Rules

rule_id	applies_to	rule	source_ids
allocation_direct	all processes	Separate configuration work orders, original meters, issue/return/stock and waste ledgers first. Attribute actual rework/reject environmental burden to accepted same-configuration output; ordered/started count is not accepted count. Prior whole vehicle manufacture not duplicated.
allocation_shared	shared utilities	Use measured causal environmental equipment time or submetered demand, document actual denominator and uncertainty. If physical allocation genuinely unavailable justify economic basis and sensitivity. No fixed scrap credit or unmeasured generic ratio.

8. Foreground Data Collection, Calculation, and Quality Rules

Data Collection Protocols

protocol_id	process_id	flow_role	record_type	raw_fields	collection_method	unit	frequency	temporal_coverage	site_scope	aggregation_rule	quality_evidence
cp_mass	dispatch	accepted complete output	measurement	model; configuration; serial number; accepted net mass M	Use traceable weighing records for the accepted complete unit of the same configuration.	kg	each accepted whole vehicle	matching finishing acceptance period	actual suitable complete-unit weighing facility	accepted net mass per unit	calibration/tare/raw whole-unit readings and independent incoming-plus-retained-additions mass closure
cp_prepare	prepare	independent atomic exchanges	foreground_record	environmental configuration ID; supplier SDS/lot/supply state; original kg issue/return/stock/waste; original kWh and sampling/time/medium; same-configuration accepted count	Record actual individual supplier formulation or physical exchange, original calibrated utility meters and post-control species measurement only if present. Preserve stock/return/accepted-count closure, environmental work-order attribution and waste recipient; no inferred functional operations.	kg; MJ	per unit and full actual period	same-configuration finishing acceptance cycle	actual environmental factory boundary	attributable process exchange / accepted units	actual formulation identity, calibrated readings, uncertainty and stock/count closure
cp_finish	finish	independent atomic exchanges	foreground_record	environmental configuration ID; supplier SDS/lot/supply state; original kg issue/return/stock/waste; original kWh and sampling/time/medium; same-configuration accepted count	Record actual individual supplier formulation or physical exchange, original calibrated utility meters and post-control species measurement only if present. Preserve stock/return/accepted-count closure, environmental work-order attribution and waste recipient; no inferred functional operations.	kg; MJ	per unit and full actual period	same-configuration finishing acceptance cycle	actual environmental factory boundary	attributable process exchange / accepted units	actual formulation identity, calibrated readings, uncertainty and stock/count closure
cp_dispatch	dispatch	independent atomic exchanges	foreground_record	environmental configuration ID; supplier SDS/lot/supply state; original kg issue/return/stock/waste; original kWh and sampling/time/medium; same-configuration accepted count	Record actual individual supplier formulation or physical exchange, original calibrated utility meters and post-control species measurement only if present. Preserve stock/return/accepted-count closure, environmental work-order attribution and waste recipient; no inferred functional operations.	kg; MJ	per unit and full actual period	same-configuration finishing acceptance cycle	actual environmental factory boundary	attributable process exchange / accepted units	actual formulation identity, calibrated readings, uncertainty and stock/count closure

Calculation Rules

rule_id	Applies to	Formula or rule	Inputs	Output	source_ids
normalize_mass	incoming_vehicle; water; cleaner; cleaning_effluent; primer; finish_coating; filter_pad; paint_residue; spent_filter; particle_air; xylene_air; prepare_power; finish_power; dispatch_power; film	q_ref = q_item / M; q_item = exchange amount per one accepted finished unit; q_ref = exchange amount per 1 kg reference flow.	q_item; M; cp_mass	q_ref

q_item is the attributable original exchange balance divided by the actual accepted count of the same complete configuration. Measure M independently for that same net delivery state. Preserve kg or MJ numerators; count traces cannot replace supplied mass. Count/area/volume reference identities need actual measured supported conversion, never a rewritten public Mass property.

Data Quality Requirements

requirement_id	Applies to	Requirement	Evidence
quality_mass	finished_machine	Use actual calibrated suitable whole-unit weighing facility with original serial/date/configuration/readings/tare/repeat uncertainty. Do not invent a vehicle scale or net weight. M contains the same complete supplied non-live unit, retained dry finish and explicitly declared permanently retained supplied fluids counted once. Exclude operational fuel/live or test payload, temporary test/support equipment, external packaging and loose spares. Independently reconcile incoming whole net mass plus actual retained additions minus measured removals with finished M. Catalogue/combat/capacity/gross shipping mass cannot replace physical net records.	actual original whole-unit metrology and independent environmental mass balance
quality_supply	incoming_vehicle; primer; finish_coating; cleaner	Trace actual complete incoming uncoated procurement state and environmental ID without describing internal systems. Each received chemical is one actual identified supplier formulation, SDS/version/lot/wet supply state and issue/return balance. A broad wall/cosmetic primer or PTFE/alkyd coating original does not establish vehicle industrial formulation. Separate individually supplied components, but never publish mixing ratios or use instructions. No duplicated complete vehicle plus component inventory.	actual supplier gate/SDS/batch ledger; waste-environment
quality_emissions	particle_air; xylene_air	Only actual measured post-control mass/time/species/medium with original method, detection limit and uncertainty. CAS1330-20-7 identifies all-isomer xylene; total VOC, indoor exposure or long-term soil flows are not substitutions. Particle size unspecified only when genuinely unspecified. Captured filters/residue are waste, not airborne release. Historical2021 environmental report includes VOHAP-free coatings; it is not proof any xylene occurs. Zero, below-detection and unmeasured are distinguished. Background electricity emissions not local releases.	air-environment; actual species-specific sampling originals
quality_water_waste	water; cleaning_effluent; paint_residue; spent_filter	Record actual supplied water and mass/volume metrology separately from contaminated collected liquids, wet paint residue and spent physical filter. Do not assume1kg/L for an industrial contaminated liquid; any volume-to-mass conversion requires measured same-stream density. Each waste composition/state, actual kg, recipient and treatment boundary independent. Direct discharge and treatment transfer differ. No universal EPA limit or pooled waste.	water-environment; waste-environment; discharge-environment
quality_complete	dataset	Reconcile all real supplier/chemical stock, electricity and water meters, waste transfer and same-configuration accepted counts/rework. Add each actually present additional chemical, wiping medium, waste and packaging separately with identity evidence; do not omit a real exchange because no UUID matches. Process map is environmental bookkeeping, not a manufacturing instruction or assertion of mandatory cleaning/coating technology. Actual complete-unit physical and environmental originals required before dataset use; scientific review remains pending.	actual complete original ledgers and qualification

9. Validation Rules

rule_id	applies_to	rule	source_ids
validation_reference	finished_machine	Exactly1kg whole accepted non-live vehicle output. Public finished44710 Mass/kg reference and output names identical in each language; restrict category to whole unit. Require original independent M and mass closure; checker pass does not approve methodology.
validation_basis	inventory	Stable lowercase row/rule/protocol IDs and both-language kg/MJ basis, accepted same-configuration denominator and independent M agree. Unmeasured exchanges and inconsistent supply states remain review gaps.
validation_scope	dataset	Only safe environmental foreground from a supplied complete uncoated non-live unit. No weapon technical details or construction route inferred; missing upstream/actual dataset evidence disclosed.
validation_atomic	all flows	One actual supplied formulation, physical material/waste or chemical/environmental species per row. Official Chinese UUID names, actual property/unit/state retained; conditional emissions require originals.

10. Published Dataset Profile

Field	Value
dataset_role	foreground_manufacturing_module
downstream_use	secondary_dataset; background_dataset
allowed_use	Environmental foreground account for surface finishing of one supplied new complete uncoated non-live motorized armoured vehicle. The factory receives a physically complete unit, records its procurement gate and actual environmental configuration identity, attributes actual conditional cleaning and supplied coating consumption, environmental-control electricity, water, collected wastes and measured releases, then records environmental quality acceptance, independent complete net mass and dispatch. Earlier vehicle and component construction is upstream. This PCR specifies environmental accounting and general metrology only; it provides no vehicle or weapon design, manufacture parameters, assembly sequence, functional details or performance optimization.
excluded_use	Exclude parts-only manufacture or component/weapon integration, design or ballistic/functional testing, armour specifications and operating instructions, ammunition and energetic payload, operation, fuel consumption in service, transport service, refurbishment, dismantling and disposal. Product M excludes external packaging, temporary test/support equipment, operational fuel and live/test payload. This foreground starts with a whole supplied vehicle and is not all vehicle manufacture or complete cradle-to-gate. Any actual additional manufacturing route requires independent applicability and safe evidence review rather than inferred operations.
required_metadata	environmental product/configuration ID and serial, complete supplied non-live state, received versus finished net mass and retained coating/fluids convention, supplier gate and transport boundary, individual formulation SDS/batch/state and waste destination, actual site/period/meter voltage, same-configuration accepted count and rejects/rework, original whole-unit calibrated net weighing and independent mass closure, optional pollutant CAS/medium/post-control method/uncertainty, upstream/flow gaps and pending scientific review
required_quality_disclosure	Candidate scientific review pending, actual complete incoming/final state and independent M/uncertainty, suppliers and environmental formulation identities, meters/stock/waste/species originals, period/site/configuration/accepted count/rework/allocation, unresolved flow IDs and upstream/transport/treatment gaps. Per-kg whole-vehicle finishing account cannot compare operation or protective performance and is not full cradle-to-gate.
update_trigger	Actual incoming supply state or environmental configuration, formulation SDS/supplier, site/period/meter/control route, waste recipient, mass method, source/flow identity or scientific overlap review changes.

11. Data Sources

Source id	Type	Reference	Used for
air-environment	handbook	U.S. Army, Life Cycle Environmental Assessment for the Mobile Protected Firepower (MPF) System, August2021, printedp17 / PDFpage23, manufacturing environmental air discussion only. https://home.army.mil/stewart/application/files/6016/3975/0650/Final_Life_Cycle_EA_for_MPF_on_Army_Installations.pdf	Historical qualitative coating/air accounting context, not recipes, military standards, VOC thresholds, current quantities or proof of pollutant presence; no minimal-impact conclusion adopted.
water-environment	handbook	Same Army August2021 EA, printedp23 / PDFpage29, manufacturing industrial-water containment/treatment passage only.	Historical manufacturing effluent collection and treatment distinction; not mandatory present route or direct-discharge limit.
waste-environment	handbook	Same Army August2021 EA, printedp34 / PDFpage40, manufacturing cleaner/paint/filtration environmental waste passage only.	Historical environmental chemical/waste separation context, no coating selection, recipe or application instruction; actual supplied state and current records govern.
discharge-environment	handbook	U.S. EPA, Metal Products and Machinery Effluent Guidelines, official HTML overview, updated May13,2026, unpaginated industry/applicability sections. https://www.epa.gov/eg/metal-products-and-machinery-effluent-guidelines	Generic sector/route/direct-discharge applicability distinction; not jurisdiction-specific legal compliance, universal discharge limit or proof actual vehicle factory belongs to this category.