Other mammals, live

1. Scope and Applicability

This PCR covers living mammals not separately classified as bovines, other ruminants, equines, swine, rabbits or hares. It is a heterogeneous residual category, not a species-free average or a legal authorization for wild-animal trade. Every concrete lot requires taxonomic species, origin, purpose, conservation and legal status, welfare controls and actual handover gate. Captive breeding/rearing and demonstrably lawful live capture are mutually exclusive lot routes. Classification mention of cetaceans, sirenians, primates or other protected groups never authorizes contemporary capture. Without lawful-source evidence the capture route cannot be used. Dead animals, meat, fur, slaughter and post-gate transport/use are excluded.

2. Product Category Identity

Field	Value
canonical_pcr_id	pcr.agriculture-forestry-and-fishery-products.live-animals-and-animal-products-excluding-meat.other-mammals
classification_refs	CPC 3.0 02192, Other mammals
covered_products	Species-resolved living residual-class mammals of lawful captive or lawful live-capture origin
excluded_products	Specifically classified live mammals; dead animals; meat/fur; undocumented wildlife trade; post-gate use
representative_product	One declared species/class of living mammal, not a cross-species mix
production_route	Managed breeding/rearing followed by selection, or separately documented lawful live capture; never fictional breeding on capture route
market_state	Alive and unprocessed at real producer/capture handover, with count, mass and condition

3. Reference Flow

Field	Value
What	Living mammal of a declared residual-category species at its real handover
How much	1 kg measured live mass, plus individual count
How well	Alive, species-resolved, lawful origin and condition established
How long or cycle	Actual breeding/rearing cohort and service periods, or documented capture campaign
reference_flow_link	reference_product_handover

Field	Value
Reference amount	1
Reference product flow	Species-qualified live other mammal at actual gate
Reference flow property	Mass 93a60a56-a3c8-11da-a746-0800200b9a66
Reference unit group	Mass 93a60a57-a4c8-11da-a746-0800200c9a66
Reference unit	kg
Required qualifiers	Scientific species; count/class; live condition; mass method; route; origin; protected status; permit; jurisdiction; actual gate; period

Instantiate one foreground reference from the actual handed-over lot, with all required qualifiers. The category may cover alternative states and producer gates, but each package has one declared species/state/gate/grade stratum and one measured accepted reference-output denominator. Do not pool incompatible states or claim equal service from equal mass. Route-specific source rows and reference_handover describe the same physical boundary event; their linked internal transfer is not another sale or another physical operation.

No species-free platform Product flow proves the concrete reference. Final exchanges require exact species/route/gate identity verification.

4. Measurement and Unit Rules

rule_id	Applies to	Required property	Required unit	Rule
live_mass	Incoming and outgoing animals	Mass	kg	Weigh individuals or validate species/class sampling and reconcile with counts.
count_balance	Each lot and period	Count	head	Opening + births + purchases + captures − transfers − releases − deaths = closing; identify animals once.
period_index	Cohorts and assets	Time	days or cycle	Link inputs, outputs, replacements and assets to real benefited periods; do not assume lifespan.
inventory_reference_normalization	all inventory rows	Actual flow property	exchange unit per reference flow	The inventory and collection aggregation fields below express final amounts per declared reference flow. Keep all raw collection records, original denominator qualifiers, route/period strata, unit conversions and allocation requirements. For each flow, first obtain its attributable amount in its own numerator unit using the existing rules; then divide by the measured accepted reference-output quantity of the same scope and multiply by the declared reference quantity. Do not mix species, states, gates or incompatible routes; count transfers and shared burdens once. A missing, zero or untraceable accepted-output denominator is a blocking data-quality issue. Keep provisional QA ranges on their explicitly stated bases; they are not conversion factors or production defaults. These are final foreground-package contributions, not replacements for stage quantitative references or stage-native unit-process datasets. Retain stage records separately. Compute normalized amount = attributable raw amount * declared reference quantity / measured accepted final reference-output quantity. Apply normalization exactly once.
stage_throughput_linkage	stage records and final package contributions	Actual flow property and its stated raw basis	retain native numerator and stage denominator units	Keep the original lot, event, cohort, period and stage denominators with their units. Reconstruct the attributable numerator A with measured stage quantity Q_stage and documented attribution before final normalization. If a quoted amount a_B corresponds to an explicit stage basis B_stage (for example, 1000 kg), use A = a_B * Q_stage / B_stage. If r_stage is already an intensity in exchange-unit per stage-unit, instead use A = r_stage * Q_stage, with no second division by B_stage. A raw attributable total is used directly. Final contribution = A * declared reference quantity / measured accepted final output. Convert compatible units explicitly and apply each attribution/allocation share exactly once; never treat a quoted amount or intensity as a raw total. Link stage transfers, losses, rejects, stocks, shared services and allocation to the same actual route, period and final-output stratum. For a 1000 kg basis retain 1000 kg explicitly. Do not assume unit yield, equal fresh/dried mass, equal head mass, equal dose quality or interchangeable gates. Missing links, unsupported unit conversion, zero denominators and untraceable allocation block dataset production. Stage-native datasets retain their own stage reference; package contributions are a separate projection.

5. System Boundary

Boundary Abstraction

Field	Value
declared_starting_condition	Documented captive opening/purchased stock and prior burden, or lawful pre-capture campaign context
starting_condition_role	Managed biological stock or authorized wild-source context; no fictional lifetime farming on capture route
product_classification_scope	CPC 3.0 02192 after exclusion of more specific live-mammal leaves
recursive_input_rule	Link purchased same-category animals once to preceding-gate data; internal rearing/selection transfer is not another final product.
upstream_dataset_requirement	Match incoming stock, feed, water, energy and materials to species, supplier, geography, unit and gate.
disclosure	Species, lawful source and protected status, permit, welfare, lot/cohort/campaign, asset periods, death/release, outputs and actual gate.

Boundary Rules

rule_id	Applies to	Rule	source_ids
boundary_identity	Every lot	Species-level residual classification and lawful origin are prerequisites; CPC examples are not permits.	un-cpc-2025; woah-wildlife-trade-2021
boundary_managed	Captive route	Include actual stock, husbandry inputs, care, mortality and pre-gate selection; purchased stock carries upstream burden.	woah-wildlife-trade-2021
boundary_capture	Capture route	Include only authorized campaign, equipment, temporary holding, welfare and capture handover; without legal evidence this route is ineligible.	woah-wildlife-trade-2021
boundary_gate	Both	End at real live handover; exclude post-gate delivery, buyer use, slaughter and corpse processing.	un-cpc-2025
boundary_shared	Shared enclosure/equipment	Record consuming nodes and service periods; charge common burden once.
reference_handover_linkage	actual reference-product boundary	Record reference_handover as the same physical producer handover already represented by its source rows. It must not extend the gate or insert new processing, capture, storage, transport, service or capital burdens. For a unit-process projection, keep the actually operated stage references; the handover record may be a boundary interface in the resulting foreground package, not an invented standalone operation. Select one actual qualified route/output stratum; trace matching source and input as internal transfers and expose the accepted reference product once. If the source already ended at this gate, partition its existing handover responsibility without counting it again.

6. Process Inventory Structure

Process Map

process_id	process_name	inclusion	inclusion_condition	role	quantitative_reference
managed	Managed breeding and rearing	conditional	Lawful species-resolved captive operation	Biological production, stock, feed, welfare, mortality, real co-products	per kg live mammals leaving managed rearing
selection	Live selection and handover	conditional	Captive route only	Independent health/condition screen, weighing and producer gate	per kg accepted producer-gate live mammal
capture	Lawful live capture and handover	conditional	Documented authorized campaign only	Independent capture, short holding and actual capture gate; no farm production	per kg accepted capture-gate live mammal
reference_handover	Actual producer reference-product handover	required	One actual declared route, state and producer gate per foreground package	Record the existing physical boundary handover once; linkage/accounting responsibility, not additional treatment or distribution	1 kg accepted product at the declared handover

Managed and capture are mutually exclusive per lot. Selection is separate from growth because acceptance, weighing and handover follow production. Capture removes an animal from a documented lawful source, not from fictional managed stock. Death is loss/waste, not live output; release is documented in the animal ledger, not a sale or waste. Index breeding, rearing, replacement and shared-service periods as well as capture events.

Process: Managed breeding and rearing (managed)

Inputs

Product flows

Purchased living stock (stock)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

• Selected flow: Species-qualified live stock (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Broad provisional completeness screen, not a default
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 1000000
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Supplied husbandry water (water)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

• Selected flow: Water by actual use (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_inputs
• Range: Broad provisional completeness screen, not a default
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 1000000
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Waste flows

Elementary flows

Outputs

Product flows

Live animals leaving rearing (reared)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

• Selected flow: Species-qualified live animals (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Unit output reconciliation
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Calculated from collection (calculated_from_collection)

Waste flows

Pre-gate animal mortality (death)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

• Selected flow: Dead animal material by destination (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Broad provisional completeness screen, not a default
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 1000000
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Discarded collected mammal manure (review_managed_manure_waste)

Record collected manure actually sent to treatment or disposal, its moisture and destination. Grazing deposition is not a collected waste transfer. Useful independently transferred manure needs its own evidenced product treatment; never count the same material in both.

• Selected flow: Collected mammal manure for treatment (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Weigh the actual waste handoff, apply existing attribution and normalize once to accepted final reference output.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_pathway_emissions
• Sources: review-ipcc-livestock-2019

Range evidence need: determine wet/dry-state waste quantities from actual manure records, not a universal species-free yield.

Elementary flows

Enteric biogenic methane to air (review_managed_enteric_ch4)

Only for an applicable digestive pathway of the actual managed species and class; derive emissions from documented animal activity/intake and a justified method. Do not substitute a cattle factor for an uncharacterised species. Applies only to the operated managed node; preserve its existing route and period conditions. A dataset must resolve actual activity, method applicability and an evidence-based range or physical bound for this pathway before treating the inventory as complete. Missing evidence is not zero or not_applicable. A verified substance/origin/compartment UUID is still required for a final bound exchange.

• Selected flow: Methane, biogenic, to air (UUID unresolved)
• Flow property / unit: Mass / kg CH4
• Amount rule: Calculate the pathway total for this node and period, apply the existing allocation and stage_throughput_linkage, then inventory_reference_normalization exactly once to the measured final accepted reference output.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_pathway_emissions
• Sources: review-ipcc-livestock-2019

Manure biogenic methane to air (review_managed_manure_ch4)

Calculate actual atmospheric release by manure system, climate, residence time and volatile-solids activity. Reconcile captured, destroyed or oxidised methane; produced methane is not automatically emitted methane. Applies only to the operated managed node; preserve its existing route and period conditions. A dataset must resolve actual activity, method applicability and an evidence-based range or physical bound for this pathway before treating the inventory as complete. Missing evidence is not zero or not_applicable. A verified substance/origin/compartment UUID is still required for a final bound exchange.

• Selected flow: Methane, biogenic, to air (UUID unresolved)
• Flow property / unit: Mass / kg CH4
• Amount rule: Calculate the pathway total for this node and period, apply the existing allocation and stage_throughput_linkage, then inventory_reference_normalization exactly once to the measured final accepted reference output.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_pathway_emissions
• Sources: review-ipcc-livestock-2019

Direct manure nitrous oxide to air (review_managed_direct_n2o)

Use the actual manure-management nitrogen pathway. Keep storage/treatment distinct from field application and grazing deposition, which require a managed-soil method and an explicitly assigned inventory responsibility. Applies only to the operated managed node; preserve its existing route and period conditions. A dataset must resolve actual activity, method applicability and an evidence-based range or physical bound for this pathway before treating the inventory as complete. Missing evidence is not zero or not_applicable. A verified substance/origin/compartment UUID is still required for a final bound exchange.

• Selected flow: Nitrous oxide to air (UUID unresolved)
• Flow property / unit: Mass / kg N2O
• Amount rule: Calculate the pathway total for this node and period, apply the existing allocation and stage_throughput_linkage, then inventory_reference_normalization exactly once to the measured final accepted reference output.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_pathway_emissions
• Sources: review-ipcc-livestock-2019

Indirect manure nitrogen-derived nitrous oxide to air (review_managed_indirect_n2o)

Calculate attributable indirect N2O from documented manure N volatilisation/deposition and leaching/runoff pathways where applicable. Keep separate from direct N2O and reconcile any nitrogen-fate calculation already included downstream or in the chosen background/impact model. Applies only to the operated managed node; preserve its existing route and period conditions. A dataset must resolve actual activity, method applicability and an evidence-based range or physical bound for this pathway before treating the inventory as complete. Missing evidence is not zero or not_applicable. A verified substance/origin/compartment UUID is still required for a final bound exchange.

• Selected flow: Nitrous oxide to air (UUID unresolved)
• Flow property / unit: Mass / kg N2O
• Amount rule: Calculate the pathway total for this node and period, apply the existing allocation and stage_throughput_linkage, then inventory_reference_normalization exactly once to the measured final accepted reference output.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_pathway_emissions
• Sources: review-ipcc-livestock-2019

Manure ammonia to air (review_managed_nh3)

Use actual species, housing/storage conditions and a justified nitrogen-flow method. Track total N and ammoniacal N by stage; a generic volatilised-N estimate is not automatically NH3 because it may include other nitrogen species. Applies only to the operated managed node; preserve its existing route and period conditions. A dataset must resolve actual activity, method applicability and an evidence-based range or physical bound for this pathway before treating the inventory as complete. Missing evidence is not zero or not_applicable. A verified substance/origin/compartment UUID is still required for a final bound exchange.

• Selected flow: Ammonia to air (UUID unresolved)
• Flow property / unit: Mass / kg NH3
• Amount rule: Calculate the pathway total for this node and period, apply the existing allocation and stage_throughput_linkage, then inventory_reference_normalization exactly once to the measured final accepted reference output.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_pathway_emissions
• Sources: review-eea-manure-2023

Process: Live selection and handover (selection)

Inputs

Product flows

Live animals entering selection (selected_in)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

• Selected flow: Species-qualified live animals (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Broad provisional completeness screen, not a default
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 1000000
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Waste flows

Elementary flows

Outputs

Product flows

Live animal at producer handover (handover)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

Producer-handover linkage: Only when selected as the actual terminal source for this route, this state/gate-specific row supplies the same accepted physical goods to reference_handover_input. In that case it is an internal handover record, not a second external reference sale; otherwise retain its original intermediate role. Retain its exact identity and original route condition. Choose the actual terminal source, not all successive transfers; match the same lot and compatible species/state/gate evidence. A narrower fixed gate or species is never broadened. The handover interface adds no processing, transport, yield assumption or repeated handling burden.

• Selected flow: Species-qualified live mammal at producer gate (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Unit output reconciliation
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Calculated from collection (calculated_from_collection)

Waste flows

Deaths during selection (selection_death)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

• Selected flow: Dead animal material by destination (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Broad provisional completeness screen, not a default
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 1000000
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Elementary flows

Process: Lawful live capture and handover (capture)

Inputs

Product flows

Waste flows

Elementary flows

Outputs

Product flows

Live animal at lawful capture handover (captured_live)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

Producer-handover linkage: Only when selected as the actual terminal source for this route, this state/gate-specific row supplies the same accepted physical goods to reference_handover_input. In that case it is an internal handover record, not a second external reference sale; otherwise retain its original intermediate role. Retain its exact identity and original route condition. Choose the actual terminal source, not all successive transfers; match the same lot and compatible species/state/gate evidence. A narrower fixed gate or species is never broadened. The handover interface adds no processing, transport, yield assumption or repeated handling burden.

• Selected flow: Species-qualified live mammal at capture gate (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Unit output reconciliation
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Calculated from collection (calculated_from_collection)

Waste flows

Capture mortality (capture_death)

Record only real exchanges, resolved by species, gate, use and destination.

Denominator and scope requirements：per kg live output of this process

Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output.

• Selected flow: Dead animal material by destination (UUID unresolved)
• Flow property / unit: Mass / kg
• Amount rule: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
• Value mode: Calculated value (calculated_value)
• Specificity: Site-specific (site_specific)
• Normalization basis: per reference flow
• Basis kind: Reference flow (reference_flow)
• Evidence kind: Calculated from collection (calculated_from_collection)
• Collection protocol: cp_animals
• Range: Broad provisional completeness screen, not a default
  • Range role: QA guardrail (qa_guardrail)
  • Lower: 0
  • Upper: 1000000
  • Unit: kg/kg
  • Basis: per kg live output of this process
  • Basis kind: Process output (process_output)
  • Evidence kind: Reasoned estimate (reasoned_estimate)

Elementary flows

Process: Actual producer reference-product handover (reference_handover)

Instantiate one foreground reference from the actual handed-over lot, with all required qualifiers. The category may cover alternative states and producer gates, but each package has one declared species/state/gate/grade stratum and one measured accepted reference-output denominator. Do not pool incompatible states or claim equal service from equal mass. Route-specific source rows and reference_handover describe the same physical boundary event; their linked internal transfer is not another sale or another physical operation.

Inputs

Product flows

Species-qualified live other mammal at actual gate for actual producer-handover linkage (reference_handover_input)

This input matches the accepted goods represented by handover, captured_live under their unchanged route conditions. It is an internal source-to-handover linkage, not a newly purchased same-category good and not extra production. The matching source and input cancel at the package boundary.

The actual route/state/gate is selected from foreground handover evidence; retain every required qualifier. Use the actual terminal source for the same accepted physical lot, not every successive stage transfer. Fixed source identities apply only to their exact species/state/gate; use an unbound compatible source role for other covered routes and resolve the actual foreground exchange before final dataset creation.

Selected source/interface rows: handover, captured_live

Required product-instance qualifiers: Scientific species; count/class; live condition; mass method; route; origin; protected status; permit; jurisdiction; actual gate; period

• Selected flow: Species-qualified live other mammal at actual gate for actual producer-handover linkage

• Flow property / unit: Mass / kg

• Amount rule: Use measured accepted same-lot quantity reconciled to the linked source rows; normalize once to the declared reference flow.

• Value mode: Calculated value (calculated_value)

• Specificity: Site-specific (site_specific)

• Normalization basis: per reference flow

• Basis kind: Reference flow (reference_flow)

• Evidence kind: Calculated from collection (calculated_from_collection)

• Collection protocol: cp_reference_handover

• Range: Exact identity-reconciliation check after normalization, not a production-yield default

  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg
  • Basis: Declared reference quantity; input and output are the same accepted physical goods under the same handover ledger
  • Basis kind: Reference flow (reference_flow)
  • Evidence kind: Calculated from collection (calculated_from_collection)

Waste flows

Elementary flows

Outputs

Product flows

Species-qualified live other mammal at actual gate (reference_product_handover)

This is the actual accepted reference product at the declared producer boundary, measured under cp_reference_handover. It is the sole external reference output; instantiate its real identity from the lot, not a broad fixed UUID.

The actual route/state/gate is selected from foreground handover evidence; retain every required qualifier. Use the actual terminal source for the same accepted physical lot, not every successive stage transfer. Fixed source identities apply only to their exact species/state/gate; use an unbound compatible source role for other covered routes and resolve the actual foreground exchange before final dataset creation.

Selected source/interface rows: handover, captured_live

Required product-instance qualifiers: Scientific species; count/class; live condition; mass method; route; origin; protected status; permit; jurisdiction; actual gate; period

• Selected flow: Species-qualified live other mammal at actual gate

• Flow property / unit: Mass / kg

• Amount rule: 1 kg

• Value mode: Calculated value (calculated_value)

• Specificity: Site-specific (site_specific)

• Normalization basis: per reference flow

• Basis kind: Reference flow (reference_flow)

• Evidence kind: Calculated from collection (calculated_from_collection)

• Collection protocol: cp_reference_handover

• Range: Exact identity-reconciliation check after normalization, not a production-yield default

  • Range role: QA guardrail (qa_guardrail)
  • Lower: 1
  • Upper: 1
  • Unit: kg
  • Basis: Declared reference quantity; input and output are the same accepted physical goods under the same handover ledger
  • Basis kind: Reference flow (reference_flow)
  • Evidence kind: Calculated from collection (calculated_from_collection)

Waste flows

Elementary flows

7. Allocation and Co-product Handling

rule_id	Applies to	Rule	source_ids
allocation_outputs	Managed output set	Enumerate only real independent products and their handovers. Subdivide separable processes; otherwise allocate inseparable burdens by documented handover economic value, disclose prices/period and mass-allocation sensitivity. No hypothetical credit.
allocation_capture	Capture campaign	Attribute actual campaign burdens to lawfully transferred intended outputs; releases are non-sale and mortality follows actual disposal.
allocation_periods	Cohorts and replacements	Attribute inputs and replacement stock to benefited periods with opening/closing reconciliation; internal animal transfer has one burden.
allocation_assets	Shared enclosures/equipment	Allocate by recorded service hours/capacity across consuming nodes and periods; do not double count.

8. Foreground Data Collection, Calculation, and Quality Rules

Specific input identification before dataset completion

Identify the actual input for this operation from supplier specifications, equipment and primary records. This is a mandatory collection requirement, not an exchange. Before dataset completeness, represent each used material, formulated product, carrier or independently purchased service by one physically specific card with its native quantity/property; confirm a compatible UUID, or retain an explicit unresolved identity and do not claim a fully linked dataset. Do not substitute a conditional example for an unknown actual input, invent a recipe, omit required use or infer zero from missing records. Attribute shared use, reusable assets and inclusive services once; preserve the original stage/period and measured throughput link to final reference output. The former aggregate range is not a component limit or consumption default.

requirement_id	collection_protocol_id	Preserved collection scope
feed_specific_input	cp_inputs	Operation managed: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Use separate feed-supply, intake and loss ledgers under calc_feed_supply_and_intake. The quantity carrying feed-production burden includes in-boundary refusals, spoilage and uneaten feed; it is not reduced to animal intake. Retain source, species/cohort, phase and original mass/moisture basis. Calculate the final contribution with inventory_reference_normalization and stage_throughput_linkage exactly once. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using reconciled feed-supply records that retain in-boundary losses and their production burden.
energy_specific_input	cp_inputs	Operation managed: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
assets_specific_input	cp_assets	Operation managed: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.
capture_energy_specific_input	cp_inputs	Operation capture: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records.

Material and service identification requirements

Identify each actual material or independently supplied service from supplier and activity records; record composition/specification, quantity, unit, node and period separately. Add one concrete exchange per identity before dataset completion; these requirements are not a single exchange. Reconcile with existing cards and inclusive services to avoid duplication. Allocate reusable assets over evidenced use and preserve physical quantities; normalize once to the matched final reference output. Missing identity or use evidence is a completeness gap, not zero use. Conditional examples below are not an exhaustive bill of materials and do not prescribe use or amounts.

requirement_id	collection_protocol_id	Required scope
capture_materials_identification	cp_inputs	capture and animal-welfare consumables

Data Collection Protocols

protocol_id	process_id	flow_role	record_type	raw_fields	collection_method	unit	frequency	temporal_coverage	site_scope	aggregation_rule	quality_evidence
cp_animals	managed; selection; capture	live stock, handover, mortality	animal ledger	species; ID; count; mass; origin; law/permit; status; gate; date; death; release	weighing and custody/health records; Raw aggregation requirements: unique event sum. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again.	kg; head	each event	full cohort/campaign	site/campaign	per reference flow	scale calibration; permits; vet/transfer records; traceable numerator, accepted reference-output denominator and normalization worksheet
cp_inputs	managed; capture	feed, water, energy, material	meter/invoice ledger	identity; carrier; amount; period; node; stock change	invoices, meters and inventory; Raw aggregation requirements: Use calc_feed_supply_and_intake to distinguish supplied feed carrying production burden, actual intake and losses; preserve all native stock and period records, then normalize the attributable quantity once to accepted final output. feed_specific_input: Operation managed: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Use separate feed-supply, intake and loss ledgers under calc_feed_supply_and_intake. The quantity carrying feed-production burden includes in-boundary refusals, spoilage and uneaten feed; it is not reduced to animal intake. Retain source, species/cohort, phase and original mass/moisture basis. Calculate the final contribution with inventory_reference_normalization and stage_throughput_linkage exactly once. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using reconciled feed-supply records that retain in-boundary losses and their production burden. Identify the actual input for this operation from supplier specifications, equipment and primary records. This is a mandatory collection requirement, not an exchange. Before dataset completeness, represent each used material, formulated product, carrier or independently purchased service by one physically specific card with its native quantity/property; confirm a compatible UUID, or retain an explicit unresolved identity and do not claim a fully linked dataset. Do not substitute a conditional example for an unknown actual input, invent a recipe, omit required use or infer zero from missing records. Attribute shared use, reusable assets and inclusive services once; preserve the original stage/period and measured throughput link to final reference output. The former aggregate range is not a component limit or consumption default. energy_specific_input: Operation managed: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records. Identify the actual input for this operation from supplier specifications, equipment and primary records. This is a mandatory collection requirement, not an exchange. Before dataset completeness, represent each used material, formulated product, carrier or independently purchased service by one physically specific card with its native quantity/property; confirm a compatible UUID, or retain an explicit unresolved identity and do not claim a fully linked dataset. Do not substitute a conditional example for an unknown actual input, invent a recipe, omit required use or infer zero from missing records. Attribute shared use, reusable assets and inclusive services once; preserve the original stage/period and measured throughput link to final reference output. The former aggregate range is not a component limit or consumption default. capture_energy_specific_input: Operation capture: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records. Identify the actual input for this operation from supplier specifications, equipment and primary records. This is a mandatory collection requirement, not an exchange. Before dataset completeness, represent each used material, formulated product, carrier or independently purchased service by one physically specific card with its native quantity/property; confirm a compatible UUID, or retain an explicit unresolved identity and do not claim a fully linked dataset. Do not substitute a conditional example for an unknown actual input, invent a recipe, omit required use or infer zero from missing records. Attribute shared use, reusable assets and inclusive services once; preserve the original stage/period and measured throughput link to final reference output. The former aggregate range is not a component limit or consumption default.	kg; MJ	each receipt/meter period	full cycle/campaign	site	per reference flow	invoice; calibration; traceable numerator, accepted reference-output denominator and normalization worksheet
cp_assets	managed; selection; capture	shared asset	service log	asset; node; service hours/capacity; period; burden	enclosure/equipment log; Raw aggregation requirements: once by observed use. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. assets_specific_input: Operation managed: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output. Original quantity method: Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records. Identify the actual input for this operation from supplier specifications, equipment and primary records. This is a mandatory collection requirement, not an exchange. Before dataset completeness, represent each used material, formulated product, carrier or independently purchased service by one physically specific card with its native quantity/property; confirm a compatible UUID, or retain an explicit unresolved identity and do not claim a fully linked dataset. Do not substitute a conditional example for an unknown actual input, invent a recipe, omit required use or infer zero from missing records. Attribute shared use, reusable assets and inclusive services once; preserve the original stage/period and measured throughput link to final reference output. The former aggregate range is not a component limit or consumption default.	h	each service period	full asset window	site/campaign	per reference flow	asset and maintenance records; traceable numerator, accepted reference-output denominator and normalization worksheet
cp_outputs	managed	other real intended output	transfer record	identity; quantity; recipient; price; legal basis; date	actual transfer document; Raw aggregation requirements: by output and period. Apply the existing route, period, conversion and allocation rules; retain raw totals and the measured accepted reference-output denominator for the same scope. Perform final normalization exactly once; do not divide an already normalized amount again. other_output_specific_output: Record only real exchanges, resolved by species, gate, use and destination. Denominator and scope requirements：per kg live output of this process Raw quantity and calculation requirements: Measure the actual exchange for one process, lot and period; do not double count internal transfers. Original collection denominator kind: process_output. Calculate the attributable final-package exchange under inventory_reference_normalization and stage_throughput_linkage using the matched raw records. This is a mandatory output-identification requirement, not an aggregate exchange. Preserve every actual co-product, reject, packaging waste and treatment stream in this operation. Before dataset completeness create separate cards for physically distinct streams, with actual material/state, quantity, destination and Product/Waste role. A genuinely mixed waste stream may remain one physically defined mixture with measured composition; do not invent separation or count its components again. Keep unlike units separate, retain the original allocation and reference normalization, and reconcile the output balance. Identify actual functions before co-product allocation; waste does not acquire a co-product share merely by having mass. Confirm a compatible UUID or explicitly retain its unresolved identity. Missing records never establish zero or exclusion.	kg	each transfer	full cohort	site	per reference flow	sales/transfer record; traceable numerator, accepted reference-output denominator and normalization worksheet
cp_reference_handover	reference_handover	accepted product and matched internal source transfer	producer handover ledger	lot_id, species, state, grade, route_id, gate, period, accepted_quantity, native_unit, source_row_id, source_lot_id, allocation_link	Measure accepted net product at the same actual gate; reconcile the listed state/gate-specific source rows and the linked input with this single physical output. Keep rejects, stock changes and other sales separate. No additional handling or transport is imputed.	kg; native source quantities	each actual handover	matched source and handover periods	declared producer gate only	per reference flow	traceable acceptance record, same-lot source-to-output ledger, calibrated quantity method and normalization worksheet
cp_pathway_emissions	managed	pathway-specific gases and manure N/C	herd, feed, manure, field and method ledger	species/class; animal-days; intake/DM/digestibility; volatile solids; manure N/TAN; system shares; climate; storage time; fertiliser N; grazing; volatilisation/leaching; methane recovery; factor source/unit; final accepted output ; collected manure wet mass; dry matter; destination	collect primary activity by node and period, document parameter applicability, retain each pathway worksheet and any linked treatment/pasture dataset Retain raw totals and normalize attributed quantities once to the measured accepted final reference output.	animal-day; kg DM; kg VS; kg N; kg CH4; kg N2O; kg NH3	each operating period and management change	complete represented cohort and service period	actual operated nodes only	per reference flow	meter/analysis records, nitrogen cascade, method and factor evidence, no-duplication ledger
cp_feed_supply_and_intake	managed	Feed supply, intake and loss	stock, receipt, issue and loss ledger	feed identity/source; cohort/phase; period; opening/closing stock; receipts; on-site provision; unused returns/transfers; uneaten/spoiled mass and destination; as-fed/DM; actual intake; burden owner; accepted final output	Reconcile matched stock, scales, ration/forage estimates and disposal records under calc_feed_supply_and_intake. Keep raw totals and stage denominators; assign production and treatment burden once, then normalize to accepted final output.	kg as-fed; kg DM	each issue and period close	complete represented cohort/period	actual operated feeding nodes	per reference flow	stock and supplier records; moisture evidence; loss and no-duplication reconciliation
cp_manure_n2o_coverage	managed	Direct and indirect manure/soil N2O coverage	pathway N ledger and method worksheet	species/class; period; excreted N; stage stocks/transfers; system shares; volatilised NH3-N/NOx-N; leached/runoff N; application/grazing N; factor source, unit and applicability; direct/indirect components; receiving medium; linked process and assigned card; accepted final output	Retain raw stage N and component calculations under calc_manure_n2o_coverage, matched to actual operation and existing manure protocols. Document unsupported or inapplicable paths and coverage boundaries; normalize attributable N2O once.	kg N; kg N2O	each reporting period and management change	complete represented management period	actual operated and explicitly linked nodes	per reference flow	N balance, factor unit/applicability, component-to-card and no-duplication worksheet

Calculation Rules

rule_id	Applies to	Formula or rule	Inputs	Output	source_ids
calc_reference	Accepted live output	Sum measured accepted live kg / 1 kg; retain head count, species and unique gate.	cp_animals	reference mass/count
calc_balance	Animal events	Reconcile opening, birth, purchase, capture, transfer, release, death and closing by species/class/period; growth mass is measured, not conserved by assumption.	cp_animals	balanced ledger
calc_inputs	Supplies	Net measured supply assigned to node/period / accepted live kg; do not combine captive and capture routes.	cp_inputs; cp_animals	card intensities
calc_shared	Shared asset	Asset burden × observed node/period share; shares sum to one or unused capacity is disclosed.	cp_assets	nonduplicate burden
calc_allocation	Multi-output	After subdivision allocate inseparable burden by documented handover value, with mass sensitivity.	cp_outputs; cp_animals	output burden
calc_pathway_emissions	managed	Use species- and management-compatible methods and retain disaggregated pathway totals. Convert N2O-N to N2O by 44/28 and NH3-N to NH3 by 17/14 exactly once; already molecular masses are not reconverted. Check methane against the documented available-carbon/methane-potential balance and nitrogen losses against each stage's available N. Indirect formation from previously volatilised N is a downstream transformation, not a second source-stage N loss. Attribute and normalize once; do not duplicate linked treatment or fate-model emissions. Use matched raw-period quantities before allocation for physical screens: CH4 mass × 12/16 must not exceed the carbon available to the represented pathway; source-stage NH3 mass × 14/17 plus direct N2O mass × 28/44 and other source N losses must not exceed that stage's available N, after accounting for stocks and transfers. Bound each indirect N2O-N calculation by its documented volatilised or leached N precursor, not by subtracting that downstream transformation again from the source ledger. These are conservation checks, not emission factors or an empirical per-product range.	cp_pathway_emissions	kg named compound per final reference flow	review-ipcc-livestock-2019; review-eea-manure-2023; review-ipcc-soils-2019
calc_feed_supply_and_intake	feed	Feed supply used by the represented operation = opening feed stock + receipts + on-site feed entering the operation - closing feed stock - documented unused returns or transfers out. Retain in-boundary spoilage, refusals and discarded leftovers in that supply. Actual intake = that supply - measured uneaten/discarded losses, after matching moisture/DM and period; use intake only for nutrition/metabolism. Opening stock retains its prior burden and is not another purchase. Trace any unused return or transfer and its burden destination; no automatic substitution credit. Attribute production once, through either the purchased-feed dataset or the represented on-site crop/collection node, never both for the same feed. Include actual waste treatment and manure contributions once, not as a second feed-production burden.	cp_feed_supply_and_intake	separate feed supply, intake and loss quantities, in matched as-fed/DM units	fao-feed-loss-accounting-2018
calc_manure_n2o_coverage	review_managed_direct_n2o; review_managed_indirect_n2o	For each actual manure stage, calculate direct N2O, volatilisation/deposition-derived indirect N2O, and applicable leaching/runoff-derived indirect N2O separately with documented species/system activity and factor basis. Convert N2O-N to molecular N2O by 44/28 once; do not reconvert molecular masses. Retain component worksheets. Where an existing N2O card covers both direct and indirect emissions, report their non-overlapping sum; where separate direct/indirect cards exist, assign each component once to its matching card and never also report the sum. Pasture deposition and land application use the managed-soil method, not a manure-storage factor. Assign foreground versus linked treatment/pasture coverage explicitly; a manure export does not erase earlier emissions, and already covered downstream emissions are not repeated. Account for stock, transfers and previous N losses in the nitrogen cascade; indirect N2O is a downstream transformation of its precursor, not a second source-stage N loss. Normalize attributed molecular masses once to the accepted reference output. Document inapplicability; absent pathway data are not zero.	cp_manure_n2o_coverage	kg molecular N2O by pathway and assigned existing card	review-ipcc-livestock-2019; review-ipcc-soils-2019
chemical_species_mass_accounting	elementary_nutrient_emissions	Final elementary exchanges use the mass of the identified substance and one actual receiving compartment. Keep nutrient/activity ledgers separate: species-specific N2O-N × 44/28 gives N2O, NH3-N × 17/14 gives NH3, nitrate-N × 62/14 gives nitrate, and phosphate-P × 95/31 gives phosphate. If the selected flow is elemental phosphorus instead, report kg P and convert phosphate mass by 31/95 only when that species basis is evidenced. Apply a conversion exactly once only when the method output is on the elemental basis; measured compound mass is not reconverted. Total nutrient losses cannot be assigned to a single species without a supported split, and residual/retained soil nutrient is not an emission. Keep direct/indirect pathway ledgers and avoid repeating a pathway already included in the chosen method or upstream inventory. Factor uncertainty ranges screen factors on their stated basis, not final compound amounts or admissible site emissions. Normalize the attributable compound mass once using the accepted reference quantity and the matched measured output. Unknown activity, identity or compartment remains an evidence gap and blocks a completeness claim.	cp_pathway_emissions; species-specific activity ledger, method pathway and factor basis, matched accepted output	Identity-specific exchanges and reconciled activity records

Data Quality Requirements

requirement_id	Applies to	Requirement	Evidence
dq_species_law	Each lot	Species, source, conservation status, permissions and custody chain for exact date/jurisdiction must be established.	taxonomy; permits; custody
dq_gate	Live output	Alive status, count, measured mass, condition and actual gate must reconcile.	scale; transfer; veterinary records
dq_completeness	Both routes	Reconcile inputs, outputs, deaths/releases, cohorts and campaign.	ledgers; invoices; discrepancy log
dq_periods	Shared and multi-period	Link asset/cohort burden once to real service periods.	asset and cohort ledgers

9. Validation Rules

rule_id	Applies to	Rule	source_ids
validate_classification	All	Reject species-free, wrong residual classification, undocumented origin or unresolved legal/protected status.	un-cpc-2025; woah-wildlife-trade-2021
validate_route	Each lot	Exactly one captive or lawful-capture source; capture cannot claim farm stock, captive route cannot claim wild capture.
validate_live	Final output	Mass, count, live condition and gate reconcile; deaths/releases and post-gate animals cannot inflate output.
validate_allocation	Outputs/periods	Each co-product has real handover; asset/period shares and internal transfers cannot double count.
validate_uuid	Concrete exchanges	Before final exchange, confirm exact flow species, role, gate, property and unit; semantic unresolved cards are not executable UUIDs.
v_pathway_emission_coverage	managed	Require a pathway coverage ledger for enteric CH4 where biologically applicable, manure CH4, direct/indirect N2O, NH3 and relevant field emissions. Every pathway needs a measured/calculated value, a named linked process with matching coverage, or supported inapplicability; absent data cannot become zero. Keep wild life before capture outside managed husbandry, assess actual managed holding separately, and retain species-specific evidence.	review-ipcc-livestock-2019; review-ipcc-soils-2019; review-eea-manure-2023
v_foreground_emission_responsibility	Actual operated nodes and linked services	Record responsibility for on-site fuel combustion and refrigerant leakage when applicable: either quantified foreground emissions or a named linked process explicitly covering them, never merely a fuel-supply or electricity-production input. Assess special-taxon biological and residue emissions using species/route evidence, without a generic livestock factor. Identify any unresolved pathway and withhold a completeness claim; document supported absence and prevent duplicate upstream/downstream accounting.
v_feed_supply_intake_separation	All feed inputs	Reject an upstream feed inventory reduced by in-boundary refusal, spoilage or discarded leftovers without retaining their production burden. Reconcile supply, intake, stock, transfers and loss destinations under calc_feed_supply_and_intake. Do not reuse intake as supplied feed, assume zero-burden on-site feed or grant automatic avoided-product credits.	fao-feed-loss-accounting-2018
v_manure_n2o_coverage	Applicable manure and managed-soil N pathways	Require explicit direct and indirect pathway coverage, stage N balances and molecular-mass conversion. Map each component to an existing N2O card or an explicitly covering linked process once under calc_manure_n2o_coverage. Missing indirect-pathway evidence prevents a completeness claim; no default zero or duplicate aggregate-plus-components.	review-ipcc-livestock-2019; review-ipcc-soils-2019

10. Published Dataset Profile

Field	Value
dataset_role	Foreground package for one lawful species/class, route and live gate
downstream_use	Compatible secondary_dataset or background_dataset
allowed_use	Same species, route, geography, law, class, period and gate after exact identity review
excluded_use	Generic mammal mix; unlicensed capture; protected trade without authority; slaughter, meat/fur or post-gate use
required_metadata	species; count/mass; route; protected/legal status; permits; site; cohort/campaign; gate; outputs; periods; UUID state
required_quality_disclosure	weighing, animal balance, welfare/legal chain, allocation, missing data, shared service and binding gaps
update_trigger	species, legal state, route, gate, inventory, allocation or platform identity changes

11. Data Sources

Source id	Type	Reference	Used for
un-cpc-2025	official_guidance	UN CPC 3.0 explanatory notes	residual category and exclusions
woah-wildlife-trade-2021	official_guidance	WOAH review of wildlife trade	legal/welfare/traceability risk questions
review-ipcc-livestock-2019	official_guidance	IPCC 2019 Refinement, Volume 4, Chapter 10: Emissions from Livestock and Manure Management	Species and pathway applicability; CH4 and N2O method selection, not universal emission factors
review-eea-manure-2023	official_guidance	EMEP/EEA Air Pollutant Emission Inventory Guidebook 2023, 3.B Manure Management	NH3 nitrogen-flow method; verify actual species, management and geographical applicability before adopting parameters
review-ipcc-soils-2019	official_guidance	IPCC 2019 Refinement, Volume 4, Chapter 11: N2O Emissions from Managed Soils	Managed-soil direct and indirect nitrogen pathways and boundary reconciliation
fao-feed-loss-accounting-2018	official_guidance	FAO 2018, Environmental performance of pig supply chains, section 11.2.2	Feed supply versus intake and waste burden, not animal parameters. Applying this accounting principle to the declared taxon is this PCR's methodological choice; no pig diet or emission factor is transferred.