Ski-boots, snowboard boots and cross-country ski footwear

Ski-boots, snowboard boots and cross-country ski footwear: This PCR applies to factory-gate production of ski-boots, snowboard boots, and cross-country ski footwear…

Lifecycle status: Candidate
Content maturity: Authored methodology
Current version: No published version
Readiness: Review required
Last updated: 2026-09-02

Methodology and translation states come from the source record; publishing this website does not change their review status.

Content languages

zh-CN · Aligned

Status, classification and source details

Readiness

Warnings methodology_not_reviewed Authored methodology is candidate guidance and still requires methodology review.

Classification mapping

CPC 3.0:29410 · exact

Source

library/pcrs/food-products-beverages-and-tobacco-textiles-apparel-and-leather-products/leather-and-leather-products-footwear/ski-boots-snowboard-boots-and-cross-country-ski-footwearsha256:8289662073c2…

1. Scope and Applicability

This PCR applies to factory-gate production of ski-boots, snowboard boots, and cross-country ski footwear classified in CPC 3.0 subclass 29410. It covers hard-shell and soft-upper constructions and requires the producer to declare the footwear subtype and the actual component route.

The foreground boundary begins with received resins, foam sheets or components, textile or leather materials, closure hardware, adhesives, chemicals, utilities, refrigerant servicing attributable to production, and sale-packaging materials. It ends with accepted finished footwear at the manufacturing facility gate. Upstream raw-material production and downstream distribution, use, repair, and end of life require separate datasets.

Every process inventory card is one atomic exchange. Conditional materials, technologies, fuels, chemicals, refrigerants, and emissions are recorded only when they occur and are supported by foreground records.

2. Product Category Identity

Field	Value
canonical_pcr_id	pcr.food-products-beverages-and-tobacco-textiles-apparel-and-leather-products.leather-and-leather-products-footwear.ski-boots-snowboard-boots-and-cross-country-ski-footwear
classification_refs	CPC 3.0: 29410, exact
covered_products	Alpine ski-boots; snowboard boots; cross-country ski footwear; hard-shell and soft-upper models within CPC 29410
excluded_products	Skating boots; general sports shoes; ordinary walking or hiking footwear; upstream material production; distribution, use, repair, and end of life
representative_product	A conforming ski-boot, snowboard boot, or cross-country ski footwear model identified by size, pair or single-article convention, net mass, construction, principal materials, sole system, closure, and intended ski discipline
production_route	Component moulding or cutting; upper and liner fabrication; stockfitting and final assembly; final inspection and sale packaging
market_state	Accepted finished footwear at the manufacturing facility gate, with sale-packaging inclusion declared

3. Reference Flow

Field	Value
What	Provide conforming ski-boots, snowboard boots, or cross-country ski footwear at the manufacturing facility gate.
How much	1 kg accepted net finished footwear mass.
How well	Meets the declared model specification for subtype, size, construction, sole-binding interface where relevant, closure, flex or stiffness, materials, and quality acceptance.
How long or cycle	One completed production output event; use-stage lifetime is outside this gate-to-gate reference.
reference_flow_link	The functional unit is realized by the verified CPC 29410 product flow normalized to 1 kg accepted output.

Field	Value
Reference amount	1 kg
Reference product flow	Ski-boots, snowboard boots and cross-country ski footwear `6e39a9ed-f49c-4ddc-8869-7d4c47551bbf`
Reference flow property	Mass `93a60a56-a3c8-11da-a746-0800200b9a66`
Reference unit group	Units of mass `93a60a57-a4c8-11da-a746-0800200c9a66`
Reference unit	kg
Required qualifiers	footwear subtype; intended ski discipline; pair or single-article reporting convention; reference size and size mix; net finished mass; shell and cuff material; upper and liner construction; outsole and midsole system; closure and buckle system; adhesive and solvent route; component-moulding and cooling route; facility and country; production period; accepted quantity; sale-packaging inclusion

When constructing a foreground data package, the items listed in Required qualifiers must be declared in dataset metadata, process notes, reference flow comment, product description, or an equivalent data package field. Missing required qualifiers make the reference flow definition incomplete for that data package.

4. Measurement and Unit Rules

rule_id	Applies to	Required property	Required unit	Rule
`reference_product_mass`	Reference product and material exchanges	Mass `93a60a56-a3c8-11da-a746-0800200b9a66`	kg	Normalize inventory to 1 kg accepted net finished footwear mass; record sale packaging separately and do not include it in net footwear mass.
`pair_single_conversion`	Product and component records reported by pair or item	Mass	kg	Declare whether counts refer to a pair or one article, convert using product-specific measured average mass, and retain the count and sampling record.
`component_count_to_mass`	Eyelets, buckles, outsoles, midsoles, labels, cartons, and other count records	Mass	kg	Convert counts with measured or supplier-specified unit mass and retain the component specification and sample basis.
`utility_energy_measurement`	Electricity, purchased steam, hot water, and natural gas	Energy or mass as stated	kWh; MJ; kg	Preserve original meter units, conversion factors, temperatures, pressure or calorific basis, and allocation denominator; never combine energy carriers.
`refrigerant_mass_measurement`	R134a replenishment and release	Mass	kg	Use equipment-specific service records and close the refrigerant mass balance before reporting a release.
`reference_output_reconciliation`	Accepted output, rejects, rework, and work in progress	Mass	kg	Reconcile accepted finished mass for the declared period and disclose rework and inventory change.

5. System Boundary

Boundary Abstraction

Field	Value
declared_starting_condition	Received resins, sheets, panels, leather, hardware, chemicals, components, packaging, utilities, and attributable refrigerant service records, with identity, quantity, supplier geography when available, and opening stock declared.
starting_condition_role	Gate-to-gate foreground starting condition for CPC 29410 footwear manufacture.
product_classification_scope	CPC 3.0 subclass 29410 only, with ski-boot, snowboard-boot, or cross-country-ski-footwear subtype declared.
recursive_input_rule	If an input is already finished CPC 29410 footwear, record it once as a purchased product input with supplier dataset and do not recursively reproduce its foreground manufacture.
upstream_dataset_requirement	Every received material, component, chemical, utility, refrigerant, and packaging input requires a geographically and technologically representative upstream dataset or a disclosed unresolved data gap.
disclosure	Declare product subtype, pair or single convention, model and size, construction route, conditional steps, facility geography, production period, meter and stock boundaries, allocation, rework, waste destinations, direct-emission basis, and packaging inclusion.

rule_id	Applies to	Rule	source_ids
`boundary_gate_to_gate`	foreground_model	Include component moulding or cutting, upper and liner fabrication, stockfitting and final assembly, final inspection, and sale packaging performed for the declared product; keep upstream material manufacture and downstream distribution, use, and end of life outside this foreground boundary.	`afw-pefcr-v3-1-2025`, `eu-recommendation-2021-2279`
`boundary_product_route`	all_product_subtypes	Declare ski-boot, snowboard-boot, or cross-country-ski-footwear subtype and record only the hard-shell, soft-upper, liner, outsole, closure, and curing routes that actually occur.	`afw-pefcr-v3-1-2025`
`boundary_atomic_inventory`	all_foreground_processes	Record each material, component, adhesive, chemical, energy carrier, refrigerant, packaging material, waste stream, and direct emission as a separate exchange.	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`boundary_step_losses`	manufacturing_steps	Reconcile material inputs, accepted transfers, rejects, offcuts, residues, rework, and stock change at each manufacturing step; do not substitute an uncited default loss percentage.	`afw-pefcr-v3-1-2025`, `eu-recommendation-2021-2279`
`boundary_direct_releases`	combustion_solvent_and_refrigerant_sources	Record air, water, or soil releases only from monitoring, verified mass balance, or an approved facility emissions ledger and identify the receiving compartment.	`eu-recommendation-2021-2279`

6. Process Inventory Structure

Process Map

process_id	process_name	inclusion	inclusion_condition	role	quantitative_reference
`component_manufacturing_and_cutting`	Component moulding, cutting, and preparation	`required`	Record the actual hard-shell, sole, foam, textile, or leather component routes used for the declared footwear.	Foreground component manufacture and preparation	kg accepted component output
`upper_liner_fabrication`	Upper, liner, and closure fabrication	`required`	Include sewing, eyelet or webbing installation, and bonding only when used by the declared construction.	Foreground upper and liner fabrication	kg accepted upper-and-liner assembly
`stockfitting_and_final_assembly`	Stockfitting and final assembly	`required`	Record the actual outsole, midsole, shell, buckle, adhesive, and assembly route for the footwear subtype.	Foreground footwear consolidation and final assembly	kg accepted assembled footwear
`inspection_and_sale_packaging`	Final inspection and sale packaging	`required`	Inspection is required; each packaging card applies only when that material leaves the facility with the product.	Foreground completion and packaging	1 kg accepted reference product

Process: Component moulding, cutting, and preparation (`component_manufacturing_and_cutting`)

Inputs

Product flows

Thermoplastic polyurethane granulate（`thermoplastic_polyurethane_granulate_input`）

Record Thermoplastic polyurethane granulate as one separate exchange when the declared route moulds a thermoplastic polyurethane shell, cuff, or structural part. The amount is obtained from the stated foreground record or calculation.

Selected flow: Thermoplastic polyurethane granulate
Flow property / unit: Mass / kg
Amount rule: Net issued mass from batch issue, return, receipt, and closing-stock records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Ethylene-vinyl acetate foam sheet（`eva_foam_sheet_input`）

Record Ethylene-vinyl acetate foam sheet as one separate exchange when the declared liner, padding, or midsole route uses EVA foam sheet. The amount is obtained from the stated foreground record or calculation.

Selected flow: Ethylene-vinyl acetate foam sheet
Flow property / unit: Mass / kg
Amount rule: Net issued sheet mass from batch material and stock records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyester woven fabric（`polyester_woven_fabric_input`）

Record Polyester woven fabric as one separate exchange when the snowboard-boot or cross-country-ski footwear upper or liner uses woven polyester. The amount is obtained from the stated foreground record or calculation.

Selected flow: Polyester woven fabric
Flow property / unit: Mass / kg
Amount rule: Net issued fabric mass from roll issue, return, and stock records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Finished bovine leather（`finished_bovine_leather_input`）

Record Finished bovine leather as one separate exchange when the declared footwear upper or reinforcement uses finished bovine leather. The amount is obtained from the stated foreground record or calculation.

Selected flow: Finished bovine leather
Flow property / unit: Mass / kg
Amount rule: Net issued leather mass from hide or sheet issue, return, and stock records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Electricity for component manufacturing（`electricity_component_manufacturing_input`）

Record Electricity as one separate exchange when moulding, cutting, skiving, milling, pressing, or local extraction equipment uses electricity. The amount is obtained from the stated foreground record or calculation.

Selected flow: Electricity
Flow property / unit: Energy / kWh
Amount rule: Metered electricity or calculated allocation from a component-area submeter
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_component_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Purchased steam for component heating（`purchased_steam_component_heating_input`）

Record Purchased steam as one separate exchange when purchased steam supplies heat to an in-scope forming or conditioning operation. The amount is obtained from the stated foreground record or calculation.

Selected flow: Purchased steam
Flow property / unit: Energy / MJ
Amount rule: Supplier-metered steam mass converted using documented pressure and enthalpy
Value mode: Calculated value（calculated_value）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_component_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Hot water for component heating（`hot_water_component_heating_input`）

Record Hot water as one separate exchange when hot water crosses the component-process boundary as a supplied heat-transfer medium. The amount is obtained from the stated foreground record or calculation.

Selected flow: Hot water
Flow property / unit: Mass / kg
Amount rule: Metered hot-water mass with supply and return temperatures retained
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Natural gas for component heating（`natural_gas_component_heating_input`）

Record Natural gas as one separate exchange when an on-site heater or oven combusts natural gas for moulding or conditioning. The amount is obtained from the stated foreground record or calculation.

Selected flow: Natural gas
Flow property / unit: Energy / MJ
Amount rule: Metered natural-gas use allocated from the documented heater or production-area meter
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_component_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

R134a refrigerant replenishment（`r134a_refrigerant_replenishment_input`）

Record 1,1,1,2-Tetrafluoroethane as one separate exchange when component cooling equipment uses R134a and receives refrigerant during the reporting period. The amount is obtained from the stated foreground record or calculation.

Selected flow: 1,1,1,2-Tetrafluoroethane
Flow property / unit: Mass / kg
Amount rule: Measured maintenance recharge assigned to the component cooling equipment and reporting period
Value mode: Foreground record（foreground_record）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_refrigerant_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Waste flows

Elementary flows

Outputs

Product flows

Moulded thermoplastic polyurethane shell component（`moulded_tpu_shell_component_output`）

Record Moulded thermoplastic polyurethane ski-boot shell component as one accepted product transfer when a hard-shell ski-boot route produces accepted shell or cuff components. The amount is obtained from the stated foreground record.

Selected flow: Moulded thermoplastic polyurethane ski-boot shell component
Flow property / unit: Mass / kg
Amount rule: Measured accepted transfer mass of moulded shell components
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025

Cut EVA foam liner component（`cut_eva_liner_component_output`）

Record Cut ethylene-vinyl acetate foam liner component as one accepted product transfer when EVA foam is cut for a liner, tongue, padding, or midsole component. The amount is obtained from the stated foreground record.

Selected flow: Cut ethylene-vinyl acetate foam liner component
Flow property / unit: Mass / kg
Amount rule: Measured accepted transfer mass of cut EVA foam liner components
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025

Cut polyester upper panel（`cut_polyester_upper_panel_output`）

Record Cut polyester woven footwear upper panel as one accepted product transfer when woven polyester is cut into footwear upper or liner panels. The amount is obtained from the stated foreground record.

Selected flow: Cut polyester woven footwear upper panel
Flow property / unit: Mass / kg
Amount rule: Measured accepted transfer mass of cut polyester upper panels
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025

Cut bovine-leather upper panel（`cut_leather_upper_panel_output`）

Record Cut bovine-leather footwear upper panel as one accepted product transfer when finished bovine leather is cut into upper or reinforcement panels. The amount is obtained from the stated foreground record.

Selected flow: Cut bovine-leather footwear upper panel
Flow property / unit: Mass / kg
Amount rule: Measured accepted transfer mass of cut leather upper panels
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025

Waste flows

TPU moulding scrap（`tpu_moulding_scrap_output`）

Record Thermoplastic polyurethane moulding scrap separately when TPU moulding generates material leaving the process as waste. Retain its measured mass, composition, and treatment destination.

Selected flow: Thermoplastic polyurethane moulding scrap
Flow property / unit: Mass / kg
Amount rule: Weighed sprue, runner, purge, and rejected-part mass not internally returned to the same batch
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

EVA foam offcut（`eva_foam_offcut_output`）

Record Ethylene-vinyl acetate foam cutting offcut separately when EVA foam cutting produces segregated offcuts. Retain its measured mass, composition, and treatment destination.

Selected flow: Ethylene-vinyl acetate foam cutting offcut
Flow property / unit: Mass / kg
Amount rule: Weighed EVA foam offcut mass from cutting records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyester fabric offcut（`polyester_fabric_offcut_output`）

Record Polyester woven fabric cutting offcut separately when polyester panel cutting produces segregated textile offcuts. Retain its measured mass, composition, and treatment destination.

Selected flow: Polyester woven fabric cutting offcut
Flow property / unit: Mass / kg
Amount rule: Weighed polyester fabric offcut mass from cutting records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Bovine-leather offcut（`bovine_leather_offcut_output`）

Record Finished bovine-leather cutting offcut separately when leather cutting produces segregated offcuts. Retain its measured mass, composition, and treatment destination.

Selected flow: Finished bovine-leather cutting offcut
Flow property / unit: Mass / kg
Amount rule: Weighed bovine-leather offcut mass from cutting records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_component_material_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Elementary flows

Fossil carbon dioxide from component heat（`fossil_co2_component_heat_output`）

Record Carbon dioxide, fossil, to air only when natural gas is combusted inside this process boundary and a verified emission record exists. Do not infer the release solely from the presence of an input.

Selected flow: Carbon dioxide, fossil, to air
Flow property / unit: Mass / kg
Amount rule: Process-attributed mass from monitoring or a verified facility emissions ledger
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_direct_emissions_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Nitrogen oxides from component heat（`nitrogen_oxides_component_heat_output`）

Record Nitrogen oxides to air only when on-site component heating has pollutant-specific monitoring or permit data. Do not infer the release solely from the presence of an input.

Selected flow: Nitrogen oxides to air
Flow property / unit: Mass / kg
Amount rule: Process-attributed mass from monitoring or a verified facility emissions ledger
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_direct_emissions_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

R134a released to air（`r134a_to_air_output`）

Record 1,1,1,2-Tetrafluoroethane to air only when R134a equipment has measured recharge, recovery, opening charge, and closing charge records. Do not infer the release solely from the presence of an input.

Selected flow: 1,1,1,2-Tetrafluoroethane to air
Flow property / unit: Mass / kg
Amount rule: Verified refrigerant mass balance for the affected equipment and reporting period
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted component output
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_refrigerant_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Process: Upper, liner, and closure fabrication (`upper_liner_fabrication`)

Inputs

Product flows

Cut EVA foam liner component（`cut_eva_liner_component_input`）

Record Cut ethylene-vinyl acetate foam liner component as one separate exchange when the declared construction uses a cut EVA liner, tongue, or padding component. The amount is obtained from the stated foreground record or calculation.

Selected flow: Cut ethylene-vinyl acetate foam liner component
Flow property / unit: Mass / kg
Amount rule: Measured transfer mass received by upper and liner fabrication
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025

Cut polyester upper panel（`cut_polyester_upper_panel_input`）

Record Cut polyester woven footwear upper panel as one separate exchange when the declared upper or liner uses cut polyester panels. The amount is obtained from the stated foreground record or calculation.

Selected flow: Cut polyester woven footwear upper panel
Flow property / unit: Mass / kg
Amount rule: Measured transfer mass received by upper and liner fabrication
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025

Cut bovine-leather upper panel（`cut_leather_upper_panel_input`）

Record Cut bovine-leather footwear upper panel as one separate exchange when the declared upper or reinforcement uses cut bovine-leather panels. The amount is obtained from the stated foreground record or calculation.

Selected flow: Cut bovine-leather footwear upper panel
Flow property / unit: Mass / kg
Amount rule: Measured transfer mass received by upper and liner fabrication
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025

Polyester sewing thread（`polyester_sewing_thread_input`）

Record Polyester sewing thread as one separate exchange when polyester thread is used for the declared stitching construction. The amount is obtained from the stated foreground record or calculation.

Selected flow: Polyester sewing thread
Flow property / unit: Mass / kg
Amount rule: Net issued thread mass from cone issue, return, and closing-stock records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyester closure webbing（`polyester_webbing_input`）

Record Polyester woven webbing as one separate exchange when polyester webbing forms a closure, pull loop, strap, or reinforcement. The amount is obtained from the stated foreground record or calculation.

Selected flow: Polyester woven webbing
Flow property / unit: Mass / kg
Amount rule: Net issued webbing mass from roll issue, return, and closing-stock records
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Stainless steel eyelet（`stainless_steel_eyelet_input`）

Record Stainless steel footwear eyelet as one separate exchange when the declared closure system uses stainless steel eyelets. The amount is obtained from the stated foreground record or calculation.

Selected flow: Stainless steel footwear eyelet
Flow property / unit: Mass / kg
Amount rule: Issued eyelet count multiplied by measured or supplier-specified unit mass, less returns
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyurethane adhesive for upper fabrication（`polyurethane_adhesive_upper_input`）

Record Polyurethane footwear adhesive as one separate exchange when the upper or liner route uses polyurethane adhesive. The amount is obtained from the stated foreground record or calculation.

Selected flow: Polyurethane footwear adhesive
Flow property / unit: Mass / kg
Amount rule: Net issued adhesive mass from container issue, return, and closing-stock records
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_chemical_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Ethyl acetate for upper fabrication（`ethyl_acetate_upper_input`）

Record Ethyl acetate as one separate exchange when ethyl acetate is documented as a process solvent or cleaning chemical. The amount is obtained from the stated foreground record or calculation.

Selected flow: Ethyl acetate
Flow property / unit: Mass / kg
Amount rule: Net issued ethyl-acetate mass from container issue, return, and closing-stock records
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_chemical_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Electricity for upper and liner fabrication（`electricity_upper_liner_input`）

Record Electricity as one separate exchange when sewing, skiving, eyelet setting, adhesive application, ventilation, or handling uses electricity. The amount is obtained from the stated foreground record or calculation.

Selected flow: Electricity
Flow property / unit: Energy / kWh
Amount rule: Metered electricity or calculated allocation from an upper-line submeter
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_upper_liner_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Waste flows

Elementary flows

Outputs

Product flows

Prepared ski-footwear upper and liner assembly（`prepared_upper_liner_output`）

Record Prepared ski-footwear upper and liner assembly as one accepted product transfer when the upper and liner pass the declared in-process quality gate. The amount is obtained from the stated foreground record.

Selected flow: Prepared ski-footwear upper and liner assembly
Flow property / unit: Mass / kg
Amount rule: Measured accepted transfer mass to final assembly
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025

Waste flows

Polyester sewing-thread waste（`polyester_sewing_thread_waste_output`）

Record Waste polyester sewing thread separately when thread waste leaves the upper-line process. Retain its measured mass, composition, and treatment destination.

Selected flow: Waste polyester sewing thread
Flow property / unit: Mass / kg
Amount rule: Weighed thread ends, damaged thread, and unrecoverable cone residue
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyester webbing offcut（`polyester_webbing_offcut_output`）

Record Polyester woven webbing offcut separately when closure-webbing cutting produces segregated offcuts. Retain its measured mass, composition, and treatment destination.

Selected flow: Polyester woven webbing offcut
Flow property / unit: Mass / kg
Amount rule: Weighed webbing cut-end and rejected-piece mass
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Stainless steel eyelet scrap（`stainless_steel_eyelet_scrap_output`）

Record Stainless steel footwear eyelet scrap separately when damaged or surplus eyelets leave the process as segregated metal scrap. Retain its measured mass, composition, and treatment destination.

Selected flow: Stainless steel footwear eyelet scrap
Flow property / unit: Mass / kg
Amount rule: Rejected eyelet count multiplied by unit mass or directly weighed scrap mass
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyurethane adhesive waste from upper fabrication（`polyurethane_adhesive_waste_upper_output`）

Record Waste polyurethane footwear adhesive separately when polyurethane adhesive residue leaves the upper-line boundary. Retain its measured mass, composition, and treatment destination.

Selected flow: Waste polyurethane footwear adhesive
Flow property / unit: Mass / kg
Amount rule: Weighed unused, expired, spilled, or cured adhesive transferred to waste management
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_chemical_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Ethyl-acetate-contaminated cleaning wipe（`ethyl_acetate_contaminated_wipe_output`）

Record Ethyl-acetate-contaminated cleaning wipe separately when ethyl-acetate cleaning generates solvent-bearing solid waste. Retain its measured mass, composition, and treatment destination.

Selected flow: Ethyl-acetate-contaminated cleaning wipe
Flow property / unit: Mass / kg
Amount rule: Weighed contaminated wipes transferred from the process to waste storage
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_chemical_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Rejected upper and liner assembly（`rejected_upper_liner_output`）

Record Rejected ski-footwear upper and liner assembly separately when a rejected upper or liner leaves work in progress. Retain its measured mass, composition, and treatment destination.

Selected flow: Rejected ski-footwear upper and liner assembly
Flow property / unit: Mass / kg
Amount rule: Weighed rejected assembly mass not returned for rework
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_upper_liner_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Elementary flows

Ethyl acetate released to air（`ethyl_acetate_to_air_output`）

Record Ethyl acetate to air only when the facility has monitoring or a verified ethyl-acetate mass balance. Do not infer the release solely from the presence of an input.

Selected flow: Ethyl acetate to air
Flow property / unit: Mass / kg
Amount rule: Measured release or verified solvent-balance loss attributed to the upper-line batch
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted upper-and-liner assembly
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_direct_emissions_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Process: Stockfitting and final assembly (`stockfitting_and_final_assembly`)

Inputs

Product flows

Prepared ski-footwear upper and liner assembly（`prepared_upper_liner_input`）

Record Prepared ski-footwear upper and liner assembly as one separate exchange when the accepted upper-and-liner assembly enters stockfitting or final assembly. The amount is obtained from the stated foreground record or calculation.

Selected flow: Prepared ski-footwear upper and liner assembly
Flow property / unit: Mass / kg
Amount rule: Measured transfer mass received by final assembly
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025

Moulded thermoplastic polyurethane shell component（`moulded_tpu_shell_component_input`）

Record Moulded thermoplastic polyurethane ski-boot shell component as one separate exchange when a hard-shell ski-boot route uses moulded TPU shell or cuff components. The amount is obtained from the stated foreground record or calculation.

Selected flow: Moulded thermoplastic polyurethane ski-boot shell component
Flow property / unit: Mass / kg
Amount rule: Measured shell and cuff component mass received by final assembly
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025

Synthetic rubber outsole（`synthetic_rubber_outsole_input`）

Record Synthetic rubber ski-footwear outsole as one separate exchange when the declared footwear uses a synthetic-rubber outsole. The amount is obtained from the stated foreground record or calculation.

Selected flow: Synthetic rubber ski-footwear outsole
Flow property / unit: Mass / kg
Amount rule: Net issued outsole mass from count and unit-mass or direct weighment records
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

EVA midsole component（`eva_midsole_component_input`）

Record Ethylene-vinyl acetate ski-footwear midsole component as one separate exchange when the declared construction uses an EVA midsole component. The amount is obtained from the stated foreground record or calculation.

Selected flow: Ethylene-vinyl acetate ski-footwear midsole component
Flow property / unit: Mass / kg
Amount rule: Net issued midsole mass from count and unit-mass or direct weighment records
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Stainless steel buckle（`stainless_steel_buckle_input`）

Record Stainless steel ski-boot buckle as one separate exchange when the declared closure system uses a stainless steel buckle. The amount is obtained from the stated foreground record or calculation.

Selected flow: Stainless steel ski-boot buckle
Flow property / unit: Mass / kg
Amount rule: Issued buckle count multiplied by measured or supplier-specified unit mass, less returns
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyurethane adhesive for final assembly（`polyurethane_adhesive_assembly_input`）

Record Polyurethane footwear adhesive as one separate exchange when stockfitting or final assembly uses polyurethane adhesive. The amount is obtained from the stated foreground record or calculation.

Selected flow: Polyurethane footwear adhesive
Flow property / unit: Mass / kg
Amount rule: Net issued adhesive mass from container issue, return, and closing-stock records
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_final_assembly_chemical_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Electricity for final assembly（`electricity_final_assembly_input`）

Record Electricity as one separate exchange when pressing, stockfitting, fastening, curing, testing, ventilation, or handling uses electricity. The amount is obtained from the stated foreground record or calculation.

Selected flow: Electricity
Flow property / unit: Energy / kWh
Amount rule: Metered electricity or calculated allocation from a final-assembly submeter
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_final_assembly_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Natural gas for final-assembly heating（`natural_gas_final_assembly_input`）

Record Natural gas as one separate exchange when an on-site press heater or curing oven combusts natural gas. The amount is obtained from the stated foreground record or calculation.

Selected flow: Natural gas
Flow property / unit: Energy / MJ
Amount rule: Metered natural-gas use allocated from the documented press, oven, or area meter
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_final_assembly_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Waste flows

Elementary flows

Outputs

Product flows

Assembled ski footwear before packaging（`assembled_ski_footwear_output`）

Record Assembled ski footwear before packaging as one accepted product transfer when the completed footwear passes the declared assembly quality gate. The amount is obtained from the stated foreground record.

Selected flow: Assembled ski footwear before packaging
Flow property / unit: Mass / kg
Amount rule: Measured accepted transfer mass to final inspection
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025

Waste flows

Synthetic rubber outsole trim waste（`synthetic_rubber_trim_waste_output`）

Record Synthetic rubber outsole trimming waste separately when outsole fitting or trimming generates segregated rubber waste. Retain its measured mass, composition, and treatment destination.

Selected flow: Synthetic rubber outsole trimming waste
Flow property / unit: Mass / kg
Amount rule: Weighed outsole trimming and rejected rubber-piece mass
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polyurethane adhesive waste from final assembly（`polyurethane_adhesive_waste_assembly_output`）

Record Waste polyurethane footwear adhesive separately when polyurethane adhesive residue leaves the final-assembly boundary. Retain its measured mass, composition, and treatment destination.

Selected flow: Waste polyurethane footwear adhesive
Flow property / unit: Mass / kg
Amount rule: Weighed unused, expired, spilled, or cured adhesive transferred to waste management
Value mode: Foreground record（foreground_record）
Specificity: Technology-specific（technology_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_final_assembly_chemical_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Stainless steel buckle scrap（`stainless_steel_buckle_scrap_output`）

Record Stainless steel ski-boot buckle scrap separately when damaged or surplus buckles leave final assembly as segregated metal scrap. Retain its measured mass, composition, and treatment destination.

Selected flow: Stainless steel ski-boot buckle scrap
Flow property / unit: Mass / kg
Amount rule: Rejected buckle count multiplied by unit mass or directly weighed scrap mass
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Rejected assembled ski footwear（`rejected_footwear_assembly_output`）

Record Rejected assembled ski footwear separately when a rejected boot or shoe leaves work in progress. Retain its measured mass, composition, and treatment destination.

Selected flow: Rejected assembled ski footwear
Flow property / unit: Mass / kg
Amount rule: Weighed rejected assembly mass not returned for rework
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_final_assembly_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Elementary flows

Fossil carbon dioxide from assembly heat（`fossil_co2_assembly_heat_output`）

Record Carbon dioxide, fossil, to air only when natural gas is combusted inside final assembly and a verified emission record exists. Do not infer the release solely from the presence of an input.

Selected flow: Carbon dioxide, fossil, to air
Flow property / unit: Mass / kg
Amount rule: Process-attributed mass from monitoring or a verified facility emissions ledger
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_direct_emissions_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Nitrogen oxides from assembly heat（`nitrogen_oxides_assembly_heat_output`）

Record Nitrogen oxides to air only when on-site final-assembly heating has pollutant-specific monitoring or permit data. Do not infer the release solely from the presence of an input.

Selected flow: Nitrogen oxides to air
Flow property / unit: Mass / kg
Amount rule: Process-attributed mass from monitoring or a verified facility emissions ledger
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted assembled footwear
Basis kind: Process output（process_output）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_direct_emissions_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Process: Final inspection and sale packaging (`inspection_and_sale_packaging`)

Inputs

Product flows

Assembled ski footwear before packaging（`assembled_ski_footwear_input`）

Record Assembled ski footwear before packaging as one separate exchange when accepted assembled footwear enters final inspection and packing. The amount is obtained from the stated foreground record or calculation.

Selected flow: Assembled ski footwear before packaging
Flow property / unit: Mass / kg
Amount rule: Measured transfer mass entering final inspection
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025

Electricity for inspection and packaging（`electricity_inspection_packaging_input`）

Record Electricity as one separate exchange when inspection, testing, labelling, sealing, or handling equipment uses electricity. The amount is obtained from the stated foreground record or calculation.

Selected flow: Electricity
Flow property / unit: Energy / kWh
Amount rule: Metered electricity or calculated allocation from a finishing-area submeter
Value mode: Calculated value（calculated_value）
Specificity: Site-specific（site_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_packaging_utility_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Paper wrapping tissue（`paper_tissue_input`）

Record Paper wrapping tissue as one separate exchange when paper tissue leaves the facility around or inside the declared product package. The amount is obtained from the stated foreground record or calculation.

Selected flow: Paper wrapping tissue
Flow property / unit: Mass / kg
Amount rule: Issued sheet count multiplied by measured or supplier-specified unit mass, less returns
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Corrugated fibreboard footwear carton（`corrugated_carton_input`）

Record Corrugated fibreboard footwear carton as one separate exchange when the sale or shipping carton leaves the facility with the declared footwear. The amount is obtained from the stated foreground record or calculation.

Selected flow: Corrugated fibreboard footwear carton
Flow property / unit: Mass / kg
Amount rule: Issued carton count multiplied by measured or supplier-specified unit mass, allocated to accepted product
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Paper product label（`paper_label_input`）

Record Paper product label as one separate exchange when a paper product label or hangtag leaves the facility with the footwear. The amount is obtained from the stated foreground record or calculation.

Selected flow: Paper product label
Flow property / unit: Mass / kg
Amount rule: Issued label count multiplied by measured or supplier-specified unit mass, less returns
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polypropylene adhesive tape（`polypropylene_tape_input`）

Record Polypropylene adhesive tape as one separate exchange when polypropylene tape seals the declared carton or sale package. The amount is obtained from the stated foreground record or calculation.

Selected flow: Polypropylene adhesive tape
Flow property / unit: Mass / kg
Amount rule: Measured roll-mass consumption or issued length multiplied by product-specific mass per length
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Waste flows

Elementary flows

Outputs

Product flows

Accepted ski-boots, snowboard boots and cross-country ski footwear（`accepted_reference_product_output`）

Record Ski-boots, snowboard boots and cross-country ski footwear as one accepted product transfer when the accepted factory-gate product realizes the reference flow. The amount is obtained from the stated foreground record.

Selected flow: Ski-boots, snowboard boots and cross-country ski footwear 6e39a9ed-f49c-4ddc-8869-7d4c47551bbf
Flow property / unit: Mass / kg
Amount rule: 1 kg accepted net finished footwear mass
Value mode: Fixed value（fixed_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Identity reference（identity_reference）
Sources: unsd-cpc-3-0-29410

Waste flows

Rejected finished ski footwear（`rejected_finished_ski_footwear_output`）

Record Rejected finished ski footwear separately when a finished reject leaves work in progress after final inspection. Retain its measured mass, composition, and treatment destination.

Selected flow: Rejected finished ski footwear
Flow property / unit: Mass / kg
Amount rule: Weighed final-inspection reject mass not returned for rework
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Paper wrapping-tissue scrap（`paper_tissue_scrap_output`）

Record Paper wrapping-tissue scrap separately when paper tissue is damaged, trimmed, or unused during packing. Retain its measured mass, composition, and treatment destination.

Selected flow: Paper wrapping-tissue scrap
Flow property / unit: Mass / kg
Amount rule: Weighed damaged, trimmed, or unused tissue transferred to waste management
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Corrugated fibreboard carton scrap（`corrugated_carton_scrap_output`）

Record Corrugated fibreboard carton scrap separately when a rejected or damaged carton leaves the packaging process. Retain its measured mass, composition, and treatment destination.

Selected flow: Corrugated fibreboard carton scrap
Flow property / unit: Mass / kg
Amount rule: Weighed rejected or damaged carton mass
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Paper label scrap（`paper_label_scrap_output`）

Record Paper product-label scrap separately when rejected or surplus paper labels leave the process. Retain its measured mass, composition, and treatment destination.

Selected flow: Paper product-label scrap
Flow property / unit: Mass / kg
Amount rule: Rejected label count multiplied by unit mass or directly weighed scrap mass
Value mode: Calculated value（calculated_value）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Calculated from collection（calculated_from_collection）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Polypropylene adhesive-tape scrap（`polypropylene_tape_scrap_output`）

Record Polypropylene adhesive-tape scrap separately when discarded tape or roll ends leave the packaging process. Retain its measured mass, composition, and treatment destination.

Selected flow: Polypropylene adhesive-tape scrap
Flow property / unit: Mass / kg
Amount rule: Weighed discarded tape and unusable roll-end mass
Value mode: Foreground record（foreground_record）
Specificity: Product-specific（product_specific）
Normalization basis: per 1 kg accepted reference product
Basis kind: Reference flow（reference_flow）
Evidence kind: Collected record（collected_record）
Collection protocol: cp_packaging_batch_records
Sources: afw-pefcr-v3-1-2025, eu-recommendation-2021-2279

Elementary flows

7. Allocation and Co-product Handling

rule_id	Applies to	Rule	source_ids
`allocation_avoid_where_measured`	shared_foreground_processes	Prefer subdivision, submetering, batch records, and direct mass tracing before allocation.	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`allocation_materials_by_batch`	materials_components_chemicals_packaging	Assign net issues directly to the declared product batch; where direct assignment is impossible, use a documented causal driver and disclose the share.	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`allocation_energy_by_carrier`	electricity_steam_hot_water_and_fuel	Allocate every energy carrier separately using submeter readings, measured equipment demand and operating time, or another documented causal driver; never allocate a combined energy total.	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`allocation_refrigerant`	r134a_equipment	Allocate refrigerant replenishment and release to the serviced equipment and production period before normalizing to accepted component output.	`eu-recommendation-2021-2279`
`allocation_waste_and_emissions`	waste_and_direct_releases	Segregate waste and pollutants by material or substance before allocation; use measured batch mass, verified solvent or refrigerant balance, or the generating process driver.	`eu-recommendation-2021-2279`
`allocation_no_avoided_credit`	waste_sent_to_recovery	Report physical waste output and destination without subtracting avoided-product credit inside this gate-to-gate foreground dataset.	`afw-pefcr-v3-1-2025`

8. Foreground Data Collection, Calculation, and Quality Rules

Data Collection Protocols

protocol_id	process_id	flow_role	record_type	raw_fields	collection_method	unit	frequency	temporal_coverage	site_scope	aggregation_rule	quality_evidence
`cp_component_material_records`	`component_manufacturing_and_cutting`	Component materials, accepted components, and segregated offcuts	BOM, issue, return, stock, weighment, transfer, and waste records	batch_id; model; size; material_id; specification; opening_stock; receipts; issued_mass; returned_mass; closing_stock; accepted_transfer_mass; offcut_mass; waste_destination	Reconcile net material issues and weigh every accepted component and segregated waste stream	kg	Each batch; summarized monthly	Representative production period, normally 12 months or the full shorter run	All component suppliers and in-scope component operations	Sum each atomic material, transfer, and waste by batch; normalize to accepted component output	Approved BOM; calibrated scales; stock reconciliation; transfer note; waste ticket
`cp_component_utility_records`	`component_manufacturing_and_cutting`	Electricity, purchased steam, hot water, and natural gas	Utility meters, invoices, temperature and pressure logs, and equipment records	meter_id; carrier; opening_reading; closing_reading; unit; pressure; supply_temperature; return_temperature; enthalpy; equipment_id; operating_time; accepted_output_mass	Use dedicated meters where available; otherwise allocate a documented submeter total using measured equipment demand and operating time	kWh; MJ; kg	Meter interval and each batch	Same period as component output	Component moulding, cutting, conditioning, and extraction equipment only	Keep every carrier separate; convert with documented factors and normalize to accepted output	Meter calibration; invoice reconciliation; equipment log; conversion worksheet
`cp_refrigerant_records`	`component_manufacturing_and_cutting`	R134a replenishment and release	Equipment register and refrigerant service records	equipment_id; refrigerant; opening_charge; recharge_mass; recovered_mass; closing_charge; disposal_mass; service_date; production_period; accepted_output_mass	Reconcile equipment-level refrigerant mass balance from certified service records	kg	Every service event and annual close	Same period as component production	Cooling equipment serving in-scope operations	Allocate verified loss to serviced equipment and period; normalize to accepted component output	Service certificate; cylinder weighment; leak-test record; equipment register
`cp_upper_liner_batch_records`	`upper_liner_fabrication`	Panels, foam, thread, webbing, eyelets, accepted assembly, and solid wastes	BOM, issue, return, count, unit-mass, stock, transfer, quality, and waste records	batch_id; model; size; component_id; issued_mass_or_count; unit_mass; returned_mass_or_count; closing_stock; accepted_output_mass; reject_mass; waste_mass; destination	Reconcile net issues, convert counts with measured unit mass, and weigh accepted and rejected outputs	kg; count	Each batch; summarized monthly	Representative production period	All upper and liner lines in scope	Sum each atomic exchange by batch and normalize to accepted upper-and-liner output	BOM; calibrated scales; count-to-mass sample; inspection disposition; waste ticket
`cp_upper_liner_chemical_records`	`upper_liner_fabrication`	Polyurethane adhesive, ethyl acetate, and chemical wastes	SDS, formulation, container issue, return, stock, wipe, spill, and waste records	batch_id; chemical_id; formulation; purity_or_solids; opening_stock; receipts; issued_mass; returned_mass; closing_stock; waste_mass; retained_solvent; destination	Reconcile each chemical independently and weigh each chemical-bearing waste stream	kg	Each formulation or production batch	Same period as upper and liner production	Adhesive application, cleaning, curing, and local storage in scope	Calculate net issue and chemical-specific waste separately; normalize to accepted output	Approved SDS; container weights; stock reconciliation; hazardous-waste manifest
`cp_upper_liner_utility_records`	`upper_liner_fabrication`	Upper and liner electricity	Electricity submeter and equipment operating records	meter_id; opening_reading; closing_reading; machine_id; measured_demand; operating_time; batch_id; accepted_output_mass	Use submeter readings or allocate measured line electricity using equipment time and demand	kWh	Meter interval and each batch	Same period as upper and liner production	Sewing, skiving, eyelet setting, adhesive, ventilation, and handling equipment	Subtract documented non-production load and normalize causal allocation to accepted output	Meter calibration; machine log; allocation worksheet
`cp_final_assembly_batch_records`	`stockfitting_and_final_assembly`	Uppers, shells, outsoles, midsoles, buckles, accepted footwear, and solid wastes	BOM, issue, return, count, unit-mass, transfer, inspection, rework, and waste records	batch_id; model; size; component_id; issued_mass_or_count; unit_mass; returned_quantity; accepted_output_mass; reject_mass; rework_mass; waste_mass; destination	Reconcile each component, convert counts using unit mass, and weigh accepted, rejected, and reworked footwear	kg; count	Each batch; summarized monthly	Representative production period	All stockfitting and final assembly lines in scope	Sum each atomic exchange by batch and normalize to accepted assembled footwear	BOM; calibrated scales; component sample weights; quality disposition; waste ticket
`cp_final_assembly_chemical_records`	`stockfitting_and_final_assembly`	Polyurethane adhesive and adhesive waste	SDS, formulation, container issue, return, stock, spill, and waste records	batch_id; chemical_id; formulation; solids; opening_stock; receipts; issued_mass; returned_mass; closing_stock; waste_mass; destination	Reconcile adhesive independently and weigh liquid and cured waste	kg	Each production batch	Same period as final assembly	Adhesive application, curing, and local storage in scope	Calculate net adhesive issue and waste separately; normalize to accepted output	Approved SDS; container weights; stock reconciliation; waste manifest
`cp_final_assembly_utility_records`	`stockfitting_and_final_assembly`	Final-assembly electricity and natural gas	Utility meters, oven or press logs, and production records	meter_id; carrier; opening_reading; closing_reading; unit; equipment_id; operating_time; batch_id; accepted_output_mass	Use carrier-specific meters or allocate documented area totals using equipment operation	kWh; MJ	Meter interval and each batch	Same period as assembled footwear	Pressing, stockfitting, curing, testing, ventilation, and handling equipment	Keep electricity and natural gas separate; normalize each to accepted output	Meter calibration; utility invoice; equipment log; allocation worksheet
`cp_direct_emissions_records`	`component_manufacturing_and_cutting`; `upper_liner_fabrication`; `stockfitting_and_final_assembly`	Fuel, solvent, and refrigerant releases	Stack monitoring, solvent balance, permit ledger, and refrigerant records	source_id; substance; compartment; concentration; gas_flow; operating_time; chemical_input; recovered_mass; waste_retention; product_retention; control_efficiency; batch_id	Use substance-specific monitoring or a verified mass balance; do not infer unmeasured species	kg	Monitoring or service interval and reporting batch	Same period as the generating process	Only direct sources inside the declared foreground boundary	Attribute each substance separately using monitored operation or verified balance; normalize to accepted output	Calibration and QA records; permit report; chemical reconciliation; service certificate
`cp_packaging_batch_records`	`inspection_and_sale_packaging`	Accepted footwear, packaging inputs, final rejects, and packaging scraps	Inspection, package issue and return, count-to-mass, packing, reject, and waste records	batch_id; model; size; pair_or_single; accepted_input_mass; reference_output_mass; reject_mass; package_material_id; issued_count_or_mass; unit_mass; returned_quantity; scrap_mass; packed_quantity	Weigh footwear and scraps and convert packaging counts with product-specific unit mass	kg; count	Each packing batch	Representative production period	All final inspection and packing stations in scope	Reconcile accepted input to reference output, rejects, and stock change; normalize packaging to accepted net footwear mass	Calibrated scales; inspection disposition; package specification; packing list; waste ticket
`cp_packaging_utility_records`	`inspection_and_sale_packaging`	Inspection and packaging electricity	Electricity meter and equipment operating records	meter_id; opening_reading; closing_reading; equipment_id; measured_demand; operating_time; batch_id; reference_output_mass	Use a finishing-area submeter or allocate measured electricity by causal equipment activity	kWh	Meter interval and each packing batch	Same period as packed production	Inspection, testing, labelling, sealing, and packing equipment only	Subtract documented non-production load and normalize to accepted reference product	Meter calibration; equipment log; allocation worksheet

Calculation Rules

rule_id	Applies to	Formula or rule	Inputs	Output	source_ids
`calc_net_issue`	materials_components_chemicals_packaging	Net issue = opening stock + receipts - returns - closing stock, restricted to the declared product batch and adjusted for documented transfers.	Stock, issue, return, and transfer fields	kg net input per batch	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`calc_count_to_mass`	eyelets_buckles_outsoles_midsoles_and_packaging	Mass = issued or accepted count multiplied by product-specific measured average unit mass; retain sampling basis and uncertainty.	Count and unit-mass record	kg exchange	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`calc_utility_allocation`	shared_utility_meters	Carrier amount = metered total minus documented non-production load, multiplied by the causal share from submeter, measured equipment demand and operating time, or accepted process output. Calculate each carrier separately.	Meter readings, exclusions, and causal driver	kWh, MJ, or kg by carrier	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`calc_refrigerant_balance`	r134a_equipment	R134a release = opening charge + recharge - recovered mass - closing charge - documented disposal, only when the service record closes the equipment balance.	Equipment charge and service fields	kg R134a released	`eu-recommendation-2021-2279`
`calc_process_mass_balance`	each_manufacturing_process	Reconcile material and component inputs with accepted product output, material-specific wastes, measured direct releases, rework, and inventory change; investigate rather than assign unexplained residuals.	Atomic exchanges, rework, and stock fields	Mass-balance residual and completeness finding	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`calc_solvent_release`	ethyl_acetate	Ethyl acetate to air = net ethyl-acetate input - product retention - recovered solvent - liquid waste solvent - solvent retained in solid waste, only when a verified balance is available.	Chemical issue, recovery, retention, and waste fields	kg ethyl acetate to air	`eu-recommendation-2021-2279`
`calc_reference_normalization`	all_inventory_exchanges	Normalized exchange = reporting-period exchange divided by accepted net finished footwear mass; set the reference product output to exactly 1 kg.	Reporting-period exchange and accepted reference output	Exchange per 1 kg reference product	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`

Data Quality Requirements

requirement_id	Applies to	Requirement	Evidence
`dq_product_identity`	reference_product	Document footwear subtype, pair or single-article convention, size, net mass, intended ski discipline, construction, closure, sole system, and CPC 29410 inclusion.	Product specification; BOM; classification review; reference-flow record
`dq_bom_coverage`	materials_and_components	Use product-specific BOM and component specifications; disclose every uncovered mass share and proxy without inventing composition.	BOM coverage calculation; supplier specification; proxy log
`dq_temporal_representativeness`	all_foreground_records	Use records representative of the declared period, normally 12 consecutive months or the full shorter run, and disclose shutdowns, campaigns, and missing intervals.	Dated meter, batch, stock, quality, service, and waste records
`dq_geography_technology`	utilities_and_upstream_datasets	Match manufacturing country, energy supply, component technology, formulation, and material specification as closely as available; disclose every substitution.	Facility address; supplier geography; process technology; dataset metadata
`dq_measurement_control`	measured_quantities	Retain calibration or verification status and document conversions from count, length, area, volume, steam mass, or fuel volume to mass or energy.	Calibration certificates; sample records; conversion worksheets
`dq_atomic_completeness`	inventory	Report every included material, component, chemical, energy carrier, refrigerant, packaging material, waste, and direct emission separately and document route applicability.	Atomic inventory export; route matrix; manifest unresolved-flow review
`dq_mass_balance`	each_process	Investigate unexplained mass-balance residuals and disclose rework, work in progress, internal recycling, and stock treatment.	Process mass-balance worksheet; corrective-action record
`dq_uuid_resolution`	tiangong_linked_flows	Use a UUID only after candidate identity confirmation and public state-100 direct read; keep unresolved non-reference identities blank with row-specific review metadata.	State-100 verification record; manifest review metadata

9. Validation Rules

rule_id	Applies to	Rule	source_ids
`validate_reference_identity`	reference_flow	Require product flow `6e39a9ed-f49c-4ddc-8869-7d4c47551bbf`, Product flow type, exact CPC 29410, Mass property `93a60a56-a3c8-11da-a746-0800200b9a66`, Units of mass `93a60a57-a4c8-11da-a746-0800200c9a66`, and kg reference unit.	`unsd-cpc-3-0-29410`
`validate_required_qualifiers`	foreground_data_package	Fail completeness when footwear subtype, pair or single-article convention, size, net mass, BOM, construction route, facility, production period, or packaging inclusion is missing.	`afw-pefcr-v3-1-2025`, `eu-recommendation-2021-2279`
`validate_atomic_flows`	process_inventory	Reject collection labels and combined exchanges; every material, component, chemical, energy carrier, refrigerant, packaging material, waste, and emission shall remain separate.	`eu-recommendation-2021-2279`, `afw-pefcr-v3-1-2025`
`validate_bom_and_losses`	materials_and_manufacturing_losses	Require product-specific BOM, accepted transfers, material-specific offcuts, rejects, rework, stock change, and step-level loss reconciliation.	`afw-pefcr-v3-1-2025`, `eu-recommendation-2021-2279`
`validate_utilities`	electricity_steam_hot_water_natural_gas	Require carrier-specific meters, conversion records, boundary definitions, and allocation drivers; do not accept a combined energy amount.	`afw-pefcr-v3-1-2025`, `eu-recommendation-2021-2279`
`validate_chemicals_and_emissions`	adhesive_solvent_combustion_and_refrigerant	Require chemical-specific issue and waste records; direct emissions require monitoring or verified balance and cannot be inferred from input presence alone.	`eu-recommendation-2021-2279`
`validate_packaging`	sale_packaging	Require each included packaging material to reconcile with packing records and disclose packaging excluded from the reference product mass.	`afw-pefcr-v3-1-2025`, `eu-recommendation-2021-2279`
`validate_uuid_resolution`	tiangong_references	Reject any non-reference UUID that lacks both candidate identity confirmation and a public state-100 direct read; unresolved identities remain blank with row-specific manifest metadata.
`validate_translation_alignment`	bilingual_pcr	Require identical ordered process_id, row_id, Selected flow, controlled-token, source-id, boundary-rule, allocation-rule, and validation-rule sequences in English and Chinese.

Raw downloads

These files are byte-identical to the canonical files for this revision in the repository.

pcr.en-US.md85 KB · 8289662073c2…
manifest.yaml21 KB · ceee8f5cd3a6…
pcr.zh-CN.md76 KB · 6a18c5614ba5…
structured.yaml100 KB · c5d5a29893b3…

Structured rule index

This index comes from verified structured.yaml and retains the canonical English rule text.

System boundary rules · 5

Rule ID	Applies to	Rule	Source IDs
`boundary_gate_to_gate`	foreground_model	Include component moulding or cutting, upper and liner fabrication, stockfitting and final assembly, final inspection, and sale packaging performed for the declared product; keep upstream material manufacture and downstream distribution, use, and end of life outside this foreground boundary.	afw-pefcr-v3-1-2025, eu-recommendation-2021-2279
`boundary_product_route`	all_product_subtypes	Declare ski-boot, snowboard-boot, or cross-country-ski-footwear subtype and record only the hard-shell, soft-upper, liner, outsole, closure, and curing routes that actually occur.	afw-pefcr-v3-1-2025
`boundary_atomic_inventory`	all_foreground_processes	Record each material, component, adhesive, chemical, energy carrier, refrigerant, packaging material, waste stream, and direct emission as a separate exchange.	eu-recommendation-2021-2279, afw-pefcr-v3-1-2025
`boundary_step_losses`	manufacturing_steps	Reconcile material inputs, accepted transfers, rejects, offcuts, residues, rework, and stock change at each manufacturing step; do not substitute an uncited default loss percentage.	afw-pefcr-v3-1-2025, eu-recommendation-2021-2279
`boundary_direct_releases`	combustion_solvent_and_refrigerant_sources	Record air, water, or soil releases only from monitoring, verified mass balance, or an approved facility emissions ledger and identify the receiving compartment.	eu-recommendation-2021-2279

Allocation rules · 6

Rule ID	Applies to	Rule	Source IDs
`allocation_avoid_where_measured`	shared_foreground_processes	Prefer subdivision, submetering, batch records, and direct mass tracing before allocation.	eu-recommendation-2021-2279, afw-pefcr-v3-1-2025
`allocation_materials_by_batch`	materials_components_chemicals_packaging	Assign net issues directly to the declared product batch; where direct assignment is impossible, use a documented causal driver and disclose the share.	eu-recommendation-2021-2279, afw-pefcr-v3-1-2025
`allocation_energy_by_carrier`	electricity_steam_hot_water_and_fuel	Allocate every energy carrier separately using submeter readings, measured equipment demand and operating time, or another documented causal driver; never allocate a combined energy total.	eu-recommendation-2021-2279, afw-pefcr-v3-1-2025
`allocation_refrigerant`	r134a_equipment	Allocate refrigerant replenishment and release to the serviced equipment and production period before normalizing to accepted component output.	eu-recommendation-2021-2279
`allocation_waste_and_emissions`	waste_and_direct_releases	Segregate waste and pollutants by material or substance before allocation; use measured batch mass, verified solvent or refrigerant balance, or the generating process driver.	eu-recommendation-2021-2279
`allocation_no_avoided_credit`	waste_sent_to_recovery	Report physical waste output and destination without subtracting avoided-product credit inside this gate-to-gate foreground dataset.	afw-pefcr-v3-1-2025

Validation rules · 9

Rule ID	Applies to	Rule	Source IDs
`validate_reference_identity`	reference_flow	Require product flow 6e39a9ed-f49c-4ddc-8869-7d4c47551bbf, Product flow type, exact CPC 29410, Mass property 93a60a56-a3c8-11da-a746-0800200b9a66, Units of mass 93a60a57-a4c8-11da-a746-0800200c9a66, and kg reference unit.	unsd-cpc-3-0-29410
`validate_required_qualifiers`	foreground_data_package	Fail completeness when footwear subtype, pair or single-article convention, size, net mass, BOM, construction route, facility, production period, or packaging inclusion is missing.	afw-pefcr-v3-1-2025, eu-recommendation-2021-2279
`validate_atomic_flows`	process_inventory	Reject collection labels and combined exchanges; every material, component, chemical, energy carrier, refrigerant, packaging material, waste, and emission shall remain separate.	eu-recommendation-2021-2279, afw-pefcr-v3-1-2025
`validate_bom_and_losses`	materials_and_manufacturing_losses	Require product-specific BOM, accepted transfers, material-specific offcuts, rejects, rework, stock change, and step-level loss reconciliation.	afw-pefcr-v3-1-2025, eu-recommendation-2021-2279
`validate_utilities`	electricity_steam_hot_water_natural_gas	Require carrier-specific meters, conversion records, boundary definitions, and allocation drivers; do not accept a combined energy amount.	afw-pefcr-v3-1-2025, eu-recommendation-2021-2279
`validate_chemicals_and_emissions`	adhesive_solvent_combustion_and_refrigerant	Require chemical-specific issue and waste records; direct emissions require monitoring or verified balance and cannot be inferred from input presence alone.	eu-recommendation-2021-2279
`validate_packaging`	sale_packaging	Require each included packaging material to reconcile with packing records and disclose packaging excluded from the reference product mass.	afw-pefcr-v3-1-2025, eu-recommendation-2021-2279
`validate_uuid_resolution`	tiangong_references	Reject any non-reference UUID that lacks both candidate identity confirmation and a public state-100 direct read; unresolved identities remain blank with row-specific manifest metadata.
`validate_translation_alignment`	bilingual_pcr	Require identical ordered process_id, row_id, Selected flow, controlled-token, source-id, boundary-rule, allocation-rule, and validation-rule sequences in English and Chinese.

Processes and inputs/outputs · 4

Process ID	Process name	Input flows	Output flows
`component_manufacturing_and_cutting`	Component moulding, cutting, and preparation	9	11
`upper_liner_fabrication`	Upper, liner, and closure fabrication	9	8
`stockfitting_and_final_assembly`	Stockfitting and final assembly	8	7
`inspection_and_sale_packaging`	Final inspection and sale packaging	6	6

Complete field inspector

Loads this record’s complete manifest and structured projection on demand; values are never truncated. Requires JavaScript.

Ski-boots, snowboard boots and cross-country ski footwear

Content languages

Readiness

Classification mapping

Source

1. Scope and Applicability

2. Product Category Identity

3. Reference Flow

4. Measurement and Unit Rules

5. System Boundary

Boundary Abstraction

6. Process Inventory Structure

Process Map

Process: Component moulding, cutting, and preparation (component_manufacturing_and_cutting)

Inputs

Product flows

Thermoplastic polyurethane granulate（thermoplastic_polyurethane_granulate_input）

Ethylene-vinyl acetate foam sheet（eva_foam_sheet_input）

Polyester woven fabric（polyester_woven_fabric_input）

Finished bovine leather（finished_bovine_leather_input）

Electricity for component manufacturing（electricity_component_manufacturing_input）

Purchased steam for component heating（purchased_steam_component_heating_input）

Hot water for component heating（hot_water_component_heating_input）

Natural gas for component heating（natural_gas_component_heating_input）

R134a refrigerant replenishment（r134a_refrigerant_replenishment_input）

Waste flows

Elementary flows

Outputs

Product flows

Moulded thermoplastic polyurethane shell component（moulded_tpu_shell_component_output）

Cut EVA foam liner component（cut_eva_liner_component_output）

Cut polyester upper panel（cut_polyester_upper_panel_output）

Cut bovine-leather upper panel（cut_leather_upper_panel_output）

Waste flows

TPU moulding scrap（tpu_moulding_scrap_output）

EVA foam offcut（eva_foam_offcut_output）

Polyester fabric offcut（polyester_fabric_offcut_output）

Bovine-leather offcut（bovine_leather_offcut_output）

Elementary flows

Fossil carbon dioxide from component heat（fossil_co2_component_heat_output）

Nitrogen oxides from component heat（nitrogen_oxides_component_heat_output）

R134a released to air（r134a_to_air_output）

Process: Upper, liner, and closure fabrication (upper_liner_fabrication)

Inputs

Product flows

Cut EVA foam liner component（cut_eva_liner_component_input）

Cut polyester upper panel（cut_polyester_upper_panel_input）

Cut bovine-leather upper panel（cut_leather_upper_panel_input）

Polyester sewing thread（polyester_sewing_thread_input）

Polyester closure webbing（polyester_webbing_input）

Stainless steel eyelet（stainless_steel_eyelet_input）

Polyurethane adhesive for upper fabrication（polyurethane_adhesive_upper_input）

Ethyl acetate for upper fabrication（ethyl_acetate_upper_input）

Electricity for upper and liner fabrication（electricity_upper_liner_input）

Waste flows

Elementary flows

Outputs

Product flows

Prepared ski-footwear upper and liner assembly（prepared_upper_liner_output）

Waste flows

Polyester sewing-thread waste（polyester_sewing_thread_waste_output）

Polyester webbing offcut（polyester_webbing_offcut_output）

Stainless steel eyelet scrap（stainless_steel_eyelet_scrap_output）

Polyurethane adhesive waste from upper fabrication（polyurethane_adhesive_waste_upper_output）

Ethyl-acetate-contaminated cleaning wipe（ethyl_acetate_contaminated_wipe_output）

Rejected upper and liner assembly（rejected_upper_liner_output）

Elementary flows

Ethyl acetate released to air（ethyl_acetate_to_air_output）

Process: Stockfitting and final assembly (stockfitting_and_final_assembly)

Inputs

Product flows

Prepared ski-footwear upper and liner assembly（prepared_upper_liner_input）

Moulded thermoplastic polyurethane shell component（moulded_tpu_shell_component_input）

Synthetic rubber outsole（synthetic_rubber_outsole_input）

EVA midsole component（eva_midsole_component_input）

Stainless steel buckle（stainless_steel_buckle_input）

Polyurethane adhesive for final assembly（polyurethane_adhesive_assembly_input）

Electricity for final assembly（electricity_final_assembly_input）

Natural gas for final-assembly heating（natural_gas_final_assembly_input）

Waste flows

Process: Component moulding, cutting, and preparation (`component_manufacturing_and_cutting`)

Thermoplastic polyurethane granulate（`thermoplastic_polyurethane_granulate_input`）

Ethylene-vinyl acetate foam sheet（`eva_foam_sheet_input`）

Polyester woven fabric（`polyester_woven_fabric_input`）

Finished bovine leather（`finished_bovine_leather_input`）

Electricity for component manufacturing（`electricity_component_manufacturing_input`）

Purchased steam for component heating（`purchased_steam_component_heating_input`）

Hot water for component heating（`hot_water_component_heating_input`）

Natural gas for component heating（`natural_gas_component_heating_input`）

R134a refrigerant replenishment（`r134a_refrigerant_replenishment_input`）

Moulded thermoplastic polyurethane shell component（`moulded_tpu_shell_component_output`）

Cut EVA foam liner component（`cut_eva_liner_component_output`）

Cut polyester upper panel（`cut_polyester_upper_panel_output`）

Cut bovine-leather upper panel（`cut_leather_upper_panel_output`）

TPU moulding scrap（`tpu_moulding_scrap_output`）

EVA foam offcut（`eva_foam_offcut_output`）

Polyester fabric offcut（`polyester_fabric_offcut_output`）

Bovine-leather offcut（`bovine_leather_offcut_output`）

Fossil carbon dioxide from component heat（`fossil_co2_component_heat_output`）

Nitrogen oxides from component heat（`nitrogen_oxides_component_heat_output`）

R134a released to air（`r134a_to_air_output`）

Process: Upper, liner, and closure fabrication (`upper_liner_fabrication`)

Cut EVA foam liner component（`cut_eva_liner_component_input`）

Cut polyester upper panel（`cut_polyester_upper_panel_input`）

Cut bovine-leather upper panel（`cut_leather_upper_panel_input`）

Polyester sewing thread（`polyester_sewing_thread_input`）

Polyester closure webbing（`polyester_webbing_input`）

Stainless steel eyelet（`stainless_steel_eyelet_input`）

Polyurethane adhesive for upper fabrication（`polyurethane_adhesive_upper_input`）

Ethyl acetate for upper fabrication（`ethyl_acetate_upper_input`）

Electricity for upper and liner fabrication（`electricity_upper_liner_input`）

Prepared ski-footwear upper and liner assembly（`prepared_upper_liner_output`）

Polyester sewing-thread waste（`polyester_sewing_thread_waste_output`）

Polyester webbing offcut（`polyester_webbing_offcut_output`）

Stainless steel eyelet scrap（`stainless_steel_eyelet_scrap_output`）

Polyurethane adhesive waste from upper fabrication（`polyurethane_adhesive_waste_upper_output`）

Ethyl-acetate-contaminated cleaning wipe（`ethyl_acetate_contaminated_wipe_output`）

Rejected upper and liner assembly（`rejected_upper_liner_output`）

Ethyl acetate released to air（`ethyl_acetate_to_air_output`）

Process: Stockfitting and final assembly (`stockfitting_and_final_assembly`)

Prepared ski-footwear upper and liner assembly（`prepared_upper_liner_input`）

Moulded thermoplastic polyurethane shell component（`moulded_tpu_shell_component_input`）

Synthetic rubber outsole（`synthetic_rubber_outsole_input`）

EVA midsole component（`eva_midsole_component_input`）

Stainless steel buckle（`stainless_steel_buckle_input`）

Polyurethane adhesive for final assembly（`polyurethane_adhesive_assembly_input`）

Electricity for final assembly（`electricity_final_assembly_input`）

Natural gas for final-assembly heating（`natural_gas_final_assembly_input`）

Assembled ski footwear before packaging（`assembled_ski_footwear_output`）

Synthetic rubber outsole trim waste（`synthetic_rubber_trim_waste_output`）

Polyurethane adhesive waste from final assembly（`polyurethane_adhesive_waste_assembly_output`）

Stainless steel buckle scrap（`stainless_steel_buckle_scrap_output`）

Rejected assembled ski footwear（`rejected_footwear_assembly_output`）

Fossil carbon dioxide from assembly heat（`fossil_co2_assembly_heat_output`）

Nitrogen oxides from assembly heat（`nitrogen_oxides_assembly_heat_output`）

Process: Final inspection and sale packaging (`inspection_and_sale_packaging`)

Assembled ski footwear before packaging（`assembled_ski_footwear_input`）

Electricity for inspection and packaging（`electricity_inspection_packaging_input`）

Paper wrapping tissue（`paper_tissue_input`）

Corrugated fibreboard footwear carton（`corrugated_carton_input`）

Paper product label（`paper_label_input`）

Polypropylene adhesive tape（`polypropylene_tape_input`）

Accepted ski-boots, snowboard boots and cross-country ski footwear（`accepted_reference_product_output`）

Rejected finished ski footwear（`rejected_finished_ski_footwear_output`）

Paper wrapping-tissue scrap（`paper_tissue_scrap_output`）

Corrugated fibreboard carton scrap（`corrugated_carton_scrap_output`）

Paper label scrap（`paper_label_scrap_output`）

Polypropylene adhesive-tape scrap（`polypropylene_tape_scrap_output`）