--- pcr_id: pcr.other-transportable-goods-except-metal-products-machinery-and-equipment.glass-and-glass-products-and-other-non-metallic-products-n-e-c.moulded-assembled-white-porcelain-figurines language: en-US sync_with: pcr.zh-CN.md status: candidate content_maturity: authored_methodology translation_status: canonical --- # Moulded and assembled white hard-porcelain animal figurines ## 1. Scope and Applicability This attributional manufacturing method covers one declared design of an all-ceramic white hard-porcelain animal figurine: receipt of actual unfired mineral ingredients or a compatible whole supplied slip; wet body preparation, screening and deferrisation where performed; design-specific plaster master/working moulds; individual part forming and dewatering; wet-slurry assembly, seam retouching and hand details; drying, biscuit firing, actual underglaze manufacturer marking and transparent glaze preparation/application; glost firing, cooling, foot finishing and first complete quality release. Track each actual firing/refiring and its heat source separately, including failed/zero-output runs, start/stop, idle, cleanup, mould drying, extraction and control/asset service. Post-release packaging, storage, handling, returns and dispatch remain explicit original-cohort services. Exclude tableware/kitchenware, sanitaryware, technical/electrical ceramics, grinding media, tiles, refractory products as outputs, flowerpots/vases, bone china/earthenware/stoneware/red-stoneware, resin/plastic imitation ceramics, metal/lighting/electronic assemblies, attached non-ceramic bases, unfired fragments as final product, cold organic coatings, onglaze/inglaze coloured pictures, decals and precious-metal lustres. Those are not made applicable by sharing a kiln or CPC prefix. Purchasing fired figurines and only wrapping them does not implement this method. Actual extra onglaze decoration requires a method extension with each supplied colour/medium and real additional firing, not a zero entry. The Meissen white Lion product is primary terminal-product evidence; the manufacturer craft pages establish real raw preparation, multipart assembly, spraying/marking and firing operations. The BREF supplies independent ceramic process and adjacent-route context. This is a transparent technical synthesis, not a measured inventory or verified same-SKU bill of materials of that maker. No page establishes the selected supplier, site utility, ingredient recipe, yield, firing schedule, shrinkage, package composition or unit mass for a future dataset. Historical examples and product-page dimensions/weight are not defaults. `meissen-white-lion`; `meissen-raw-preparation`; `meissen-figurine-assembly`; `meissen-glazing`; `meissen-firing`; `jrc-ceramic-bref-2007` ## 2. Product Category Identity | Field | Value | | --- | --- | | canonical_pcr_id | pcr.other-transportable-goods-except-metal-products-machinery-and-equipment.glass-and-glass-products-and-other-non-metallic-products-n-e-c.moulded-assembled-white-porcelain-figurines | | classification_refs | CPC:3.0:37222; narrower | | covered_products | Complete first-released white hard-porcelain animal figurine of one declared design with actual underglaze maker mark only | | excluded_products | Tableware and kitchenware; sanitaryware; technical/electrical ceramics and grinding media; tiles/refractory products; flowerpots/vases; bone china/earthenware/stoneware; resin/plastic imitations; metal/lighting/electronic assemblies or attached non-ceramic bases; unfired fragments; cold organic coatings; onglaze/inglaze pictures and decals and precious-metal lustres; use/end-of-life | | representative_product | One all-ceramic white animal figurine; Meissen Lion 000001-78018-1 establishes a real terminal example, without a SKU-specific route/recipe claim | | production_route | Unfired body and mould preparation; part forming; wet assembly and retouching; drying/biscuit; underglaze mark and spray/dip transparent glaze; glost/refiring; foot finish and QC | | market_state | Complete ceramic-only object at unique first quality release; later observed services separately labelled | ## 3. Reference Flow | Field | Value | | --- | --- | | What | Provide the declared complete white ceramic animal sculpture for indoor ornamental display | | How much | 1 item of one design at unique first quality release | | How well | Actual design/material/glaze/mark identity; complete assembled geometry and surface; actual inspection for cracks, deformation, finish and marking against declared acceptance criteria; no generic test pass | | How long or cycle | One declared production cohort; post-release service horizon H is separate; no assumed decorative use-life | | reference_flow_link | finished_figurine | | Field | Value | | --- | --- | | Reference amount | 1 | | Reference product flow | Decorative art ceramics `7c859ac1-bd93-415d-9754-ae93a2dad8a5` | | Reference flow property | Number of items `01846770-4cfe-4a25-8ad9-919d8d378345` | | Reference unit group | Units of items `5beb6eed-33a9-47b8-9ede-1dfe8f679159` | | Reference unit | item | | Required qualifiers | site and period and compatible actual providers; one complete ceramic-only animal design; hard-porcelain mineral body and transparent glaze and actual mark formulation; supplied raw material form and moisture and preparation boundary; part map and plaster mould and wet assembly route; actual drying and each firing and heat source and operating modes; measured finished geometry and surface quality and unique first-release IDs; Q including closing released FG and unreleased WIP separation; opening and closing raw and WIP and unassigned stores with exchange-specific inherited burden vectors; original FG cohort history and gross dispatch and return IDs; original cohort Qc and observed service horizon H; each packaging configuration and ownership and complete stocks; each asset mould refractory and fluid physical stock and period service; actual species phase origin compartment and measured state; independent carrier mass and heat and supplier water-energy convention; allocation causality and uncertainty and unavailable identities and downstream applicability | Declare every qualifier in the actual reference/process/dataset context. Native Item(s) and item are the same physical count unit with factor 1. This declared production unit is not one kg, an equal display function or an area. Weigh each complete accepted design on a calibrated scale without packaging for the physical ledger; no catalogue mass, bounding-box area, secondary-property coefficient or guessed density supplies a conversion. No per-kg result is defined here. ## 4. Measurement and Unit Rules | rule_id | Applies to | Required property | Required unit | Rule | | --- | --- | --- | --- | --- | | reference_count | reference product | Number of items `01846770-4cfe-4a25-8ad9-919d8d378345` | item | Use 1 item; unique first-release ID counted once including closing released FG; cp_release. Native Item(s) is factor-1 equivalent to item. No item-to-kg conversion is claimed. | | row_units | each inventory exchange | Preserve native extensive property | native unit | Preserve Mass/kg, native electricity energy/MJ, actual heat/MJ and freight/t km separately. kWh becomes MJ by 3.6. Required Mass never applies to energy or transport. A secondary coefficient is not measured density, heating value or piece mass. | | physical_state | mass and species ledgers | Mass `93a60a56-a3c8-11da-a746-0800200b9a66` | kg | Measure gross wet/dry/phase-specific masses and independent relevant elements/species. Free and adsorbed water, structural hydroxyl, hydrate water and actual reaction water differ. One residual cannot determine two unknown releases. | | rates_heat | utilities and emissions | Preserve row property | native unit | Only true rates are integrated over time. Already integrated volumes are not multiplied by time again. Density is independently measured for that substance and state; carrier mass and supply/return enthalpy remain separate beside a single provider purchase. | ## 5. System Boundary ### Boundary Abstraction | Field | Value | | --- | --- | | declared_starting_condition | Whole actually supplied unfired mineral ingredients or compatible whole slip; no purchased fired figurine replacing manufacture | | starting_condition_role | foreground_material_receipt | | product_classification_scope | Narrow white hard-porcelain animal-statuette subset of CPC 37222 | | recursive_input_rule | Bought fired same-category pieces require compatible upstream burden and a new scope assessment; their packing is not this route | | upstream_dataset_requirement | Match whole supply formulation and all actual grade/route/form/geography/unit restrictions; do not duplicate constituent or provider burdens | | disclosure | Receipt-to-first-release manufacture with complete upstream links and separately labelled original-cohort services through stated horizon; consolidation boundary explicit | | rule_id | applies_to | rule | source_ids | | --- | --- | --- | --- | | b_route | manufacture | Include every actual raw preparation, mould preparation/use, part forming, slurry joining/retouching, drying, mark/glaze preparation/application, firing/refiring, finishing, testing, controls and support operation. Record actual heat source per stage; a manufacturer case is not a fixed factory recipe. | `meissen-raw-preparation`; `meissen-figurine-assembly`; `meissen-glazing`; `meissen-firing`; `jrc-ceramic-bref-2007` | | b_whole | supplied formulations | Purchase each complete supplied slip/glaze/mark/tint/fuel/lubricant once, including carrier and additives. Assays and water are subledgers. On-site mixing instead records every real external ingredient, energy and loss; no duplicate internal formulation purchase. A whole purchased kiln/mould and its embodied lining/supports/initial fluids are acquired once; component rows only record independent supply or actual repairs, with disjoint parent/child masses and service burdens. | `meissen-raw-preparation`; `meissen-figurine-assembly`; `meissen-glazing`; `jrc-ceramic-bref-2007` | | b_first_release | manufacturing numerator | Include failed/zero-output/start-stop/idle/cleanup/rework loads and opening/closing raw, unreleased WIP and unassigned non-WIP-store inherited burden vectors per exchange. Closing already-released FG is in Q: never subtract its manufacture from the numerator or add it as another production output. | `jrc-ceramic-bref-2007` | | b_services | original released cohorts | Keep original manufacturing history; post-release actual packing, storage, dispatch, returns, retest, cleanup and rework increments belong to original cohort Qc and observed horizon H. No retest/return/re-shipment creates Q. A service with Qc=0 has no unit result. Cancel internal Q hand-offs on consolidation. | `jrc-ceramic-bref-2007`; `meissen-white-lion` | | b_atomic | all exchanges | Every real additional material, applied colour/medium, fuel, chemical, cooling fluid, waste and elemental species must be added as its own specific row with actual identity and collection. Do not hide actual exchanges as zero, other, a selector or total indicator. Demonstrated absence, missing measurement and measured zero differ. Incompatible new decoration requires scope extension. | `jrc-ceramic-bref-2007`; `meissen-glazing`; `meissen-figurine-assembly` | | b_gates | physical balances | Close manufacturing, FG-service and combined wet/dry/material/element/species physical gates before allocation; internal transfers cancel once. Gross air species and gross asset/packaging physical masses are not economically scaled. External Product returns, waste transfers and direct environmental emissions differ. | `jrc-ceramic-bref-2007`; `jrc-ilcd-allocation-2010` | ## 6. Process Inventory Structure ### Process Map | process_id | process_name | inclusion | inclusion_condition | role | quantitative_reference | | --- | --- | --- | --- | --- | --- | | manufacture | Raw and mould preparation through first complete release | required | Actual declared all-ceramic white animal figurine route | Aggregated foreground; separate raw/mould/part/assembly/drying/biscuit/glaze/glost/finish/QC/control/asset ledgers; internal transfers cancel | finished_figurine; Q | | service | Original-cohort released-FG and dispatch services | required | Actual observed post-release activity only | Incremental burden only; original manufacturing history and gross physical stocks retained | original Qc; H | The process map is an aggregate reporting structure, not permission to merge physical stages or mixes. Each lot/fragment/mould/cycle retains lineage, wet/dry mass, measured losses and a burden vector for every exchange. Internal drained slip, slurry joins, recoverable trims, glaze return and recovered kiln heat cancel exactly once while actual collection/reprocessing energy and emissions remain. Conditional rows are used only when real; add actual unlisted supplies/species before dataset completion. A complete purchased kiln/mould is acquired once including embodied lining, supports and initial fluids; these composition subledgers are not additional purchases. Separate asset-component rows apply only to genuinely separate supply or repair/replacement. Keep disjoint parent/child physical masses and inherited burdens. Asset cards report only the observed period service share of their compatible upstream asset burden, separately from full physical receipts/retained stocks; current purchase mass is not automatically expensed to current Q. ### Process: Manufacturing (`manufacture`) #### Inputs ##### Product flows ###### Uncalcined ceramic kaolin (`kaolin`) Whole purchased beneficiated kaolin for the actual porcelain body or glaze; record mineralogy, free moisture, particle size and supplier boundary. Structural hydroxyl is not free water. Mine location records and ground-resource rows cannot identify this prepared supply. - Selected flow: Uncalcined ceramic kaolin - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-raw-preparation`; `jrc-ceramic-bref-2007` ###### Ground crystalline quartz (`quartz`) Whole actual crystalline quartz powder with measured grade, size and supplier milling. Do not substitute amorphous silica, fused quartz ware or unextracted quartz sand. - Selected flow: Ground crystalline quartz - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-raw-preparation`; `meissen-glazing`; `jrc-ceramic-bref-2007` ###### Ceramic feldspar powder (`feldspar`) Record each separately supplied feldspar grade and alkali/mineral composition for body or glaze. Electrical-porcelain-only and glass-batch-only records do not establish this supply identity. - Selected flow: Ceramic feldspar powder - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-raw-preparation`; `meissen-glazing`; `jrc-ceramic-bref-2007` ###### Plastic ball clay (`ballclay`) Conditional actual additional plastic clay in the declared recipe; record the entire supplied grade and water. Do not impose the tableware example recipe or assume every hard-porcelain body contains it. - Selected flow: Plastic ball clay - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `jrc-ceramic-bref-2007` ###### Ground calcium carbonate chalk (`chalk`) Actual separate chalk glaze ingredient only; keep whole supplied mass, carbonate assay and moisture independent. Evolved carbonate CO2 requires actual conversion evidence; chalk is not lime or a calcium-element indicator. - Selected flow: Ground calcium carbonate chalk - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-glazing`; `jrc-ceramic-bref-2007` ###### Ground dolomite (`dolomite`) Conditional actual glaze flux; record entire supplied Ca/Mg carbonate mineral with independent carbonate/mineral analysis. No fixed composition, decarbonation fraction or CO2 default. - Selected flow: Ground dolomite - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-glazing`; `jrc-ceramic-bref-2007` ###### Sodium carbonate deflocculant (`soda`) Only actual separate sodium carbonate supply. Record anhydrous/hydrated state, assay, supplier route and full formulation mass. Recovered-metallurgy and fixed-grade candidates cannot silently stand for unspecified ceramic soda. - Selected flow: Sodium carbonate deflocculant - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `jrc-ceramic-bref-2007` ###### Aqueous sodium silicate deflocculant formulation (`silicate`) One whole actual waterglass formulation purchase, including carrier water. Assay, solids and silicate modulus are subledger facts; do not duplicate water/active purchase or substitute a purity-qualified molten silicate solid. - Selected flow: Aqueous sodium silicate deflocculant formulation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `jrc-ceramic-bref-2007` ###### Aqueous porcelain casting-slip formulation (`slip`) Alternative only where a complete unfired slip is actually supplied. Purchase it once; link its preparation upstream. Do not also purchase its included kaolin/quartz/feldspar or water in this boundary. Actual on-site redispersion, conditioning and losses remain. - Selected flow: Aqueous porcelain casting-slip formulation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-raw-preparation`; `jrc-ceramic-bref-2007` ###### Aqueous transparent porcelain-glaze formulation (`glaze`) One complete actual external glaze suspension; include supplied tint, water and binder once. When made on site instead, record every purchased ingredient, milling, mixing, screening, actual tint and loss separately; the internal batch is not another purchase. - Selected flow: Aqueous transparent porcelain-glaze formulation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-glazing`; `jrc-ceramic-bref-2007` ###### Aqueous blue underglaze marking preparation (`mark`) Only the actual independently applied manufacturer mark on otherwise white porcelain. Whole external preparation is purchased once; blue appearance or the manufacturer description does not identify cobalt oxide or any pigment species. In-house preparation uses markpowder plus actual medium and energy, not a second whole-preparation purchase. - Selected flow: Aqueous blue underglaze marking preparation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-figurine-assembly`; `meissen-glazing`; `meissen-firing` ###### Prepared blue underglaze marking colour powder (`markpowder`) Conditional whole externally supplied formulated powder used to make the marking preparation on site. Retain supplier composition, solid/solvent evidence and losses. No invented pigment recipe; included constituent assays are not separate purchases. - Selected flow: Prepared blue underglaze marking colour powder - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Aqueous glaze-coverage tracing-colour formulation (`glazetint`) Conditional independently added tracing preparation for spray-glaze coverage, as described by the maker. Record exact supplied formulation and whether already inside bought glaze; no separate purchase in that case. Colour does not establish chemical species or permanence after firing. - Selected flow: Aqueous glaze-coverage tracing-colour formulation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_material. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_material` - Sources: `meissen-glazing` ###### Tap water (`water`) Actual treated municipal potable water only; native production-supply family is not raw abstraction, deionized water or recycled washwater. Use calibrated mass or independent measured density at recorded state; its secondary volume coefficient is not a measured density. Record mixing, mould making, cleaning and cooling separately. - Selected flow: Tap water `d1e0e36c-07f0-4a75-bdcb-efb5d9e2ac36` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `meissen-raw-preparation`; `meissen-glazing`; `jrc-ceramic-bref-2007` ###### Alternating current (`electricity`) Native interface is CN customer-side grid-average alternating current below 1 kV, expressed through its native energy property in MJ. Only an actually matching supplier/location/voltage may use this binding; the German maker pages do not establish a CN provider. Different sites require their own compatible flow. Record each mixer, mill, compressor, dryer, kiln, extraction and idle circuit; 1 kWh = 3.6 MJ. No hydropower or power-station gate substitution. - Selected flow: Alternating current `50657322-939c-4829-a87b-47c093bfa6a7` - Flow property / unit: Net calorific value `93a60a56-a3c8-11da-a746-0800200c9a66` / MJ - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Supplied pipeline natural-gas fuel formulation (`gas`) Actual pipeline gas for each real dryer or firing; full supplied formulation, composition, pressure, temperature and measured heating value are required. No pure-methane or fixed mass/volume equivalence. - Selected flow: Supplied pipeline natural-gas fuel formulation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Liquefied petroleum gas fuel formulation (`lpg`) Actual LPG fuel mixture only where used. Preserve composition, liquid/gas state, calibrated mass and independent heating value; do not infer propane/butane split or adopt a fixed native calorific grade. - Selected flow: Liquefied petroleum gas fuel formulation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Light fuel oil (`fueloil`) Actual separately supplied light heating oil only; measure mass and heating value independently, preserve receipts/stocks/leaks and each firing. Native catalytic-cracking/fixed-heating-value volume records cannot identify unspecified oil. - Selected flow: Light fuel oil - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Purchased steam heat carrier (`steam`) Conditional actual supplier steam only; retain carrier mass, pressure, temperature, dryness and delivered/return enthalpy plus supplier water/energy convention. Do not install an imaginary boiler or purchase fuel and steam for the same delivered provider burden. - Selected flow: Purchased steam heat carrier - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Purchased hot-water heat carrier (`hotwater`) Only real external hot-water circuit; measure gross supply/return mass and actual thermal states independently. Net heat does not erase water movement. Shared provider heat and carrier records form one purchase accounting interface. - Selected flow: Purchased hot-water heat carrier - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Purchased industrial heat service (`heat`) Only actual external heat not already purchased through the steam/hot-water interface. Record MJ at the measured heat-exchanger boundary and matched provider convention; internal recovered kiln heat is an internal transfer, not bought or credited heat. - Selected flow: Purchased industrial heat service - Flow property / unit: Energy / MJ - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Inbound road freight transport service (`freight`) Actual load, route, vehicle and distance for each material/asset delivery; use t km from documented gross transported load, retaining empty legs and shared-load allocation evidence. No fixed route or generic freight family binding. - Selected flow: Inbound road freight transport service - Flow property / unit: Transport performance / t km - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Calcium sulfate hemihydrate casting plaster (`plaster`) Actual casting-plaster formulation for on-site moulds; record supplied hemihydrate/anhydrite/dihydrate identity, additives and water. Hydration transfers separately measured water into the mould; no dihydrate-powder substitution. - Selected flow: Calcium sulfate hemihydrate casting plaster - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Articles of plaster or of compositions based on plaster (`mould`) One actual purchased complete plaster working or master mould, identified by fragment/design and cavity. Native manufactured plaster-article family is compatible only with that one solid article; no gypsum powder, resin mould or whole statue binding. On-site mould material/water purchases replace this external article purchase, never duplicate it. Record opening/closing dry and absorbed-water stocks and actual use. - Selected flow: Articles of plaster or of compositions based on plaster `bd137e2f-1445-4cf8-815b-e48384d865e3` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Wooden detail-forming mould (`wood`) Only real wooden mould used for hand-formed details; log species, supplied complete piece, absorbed moisture, maintenance and retirement. Artistic model creation is not mass-produced output and no fixed lifetime is assumed. - Selected flow: Wooden detail-forming mould - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Porcelain firing kiln (`kiln`) Identify actual complete installed kiln and inherited manufacturing burden, commissioning, additions, repair and retirement. Physical asset balance is unallocated; period service burden uses observed deployment/cycles and supported causality. Never one complete kiln per figurine or fixed assumed lifetime. - Selected flow: Porcelain firing kiln - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### high alumina refractory brick (`refractory`) Actual individually identified shaped high-alumina aluminosilicate sintered brick only; native Al2O3 content is above 48% and firing route is 1350–1450 C. Match actual supplier grade/route before using this binding. Keep installed/unused/spent bricks and moisture separate; no monolithic castable or silicon-carbide furniture substitution. - Selected flow: high alumina refractory brick `773fbca7-3575-483c-b38d-c017771979b3` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Silicon-carbide kiln support (`furniture`) Only actual separately purchased support plate or post of one identified SiC material/configuration; replicate rows for different supplies. Reuse is internal and actual wear, retained stock, repair and disposal determine service. - Selected flow: Silicon-carbide kiln support - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Mineral lubricating-oil formulation (`oil`) Whole actual lubricant including additives once, with in-machine fluid stock, replenishment, recovered oil, leakage and disposal. Do not equate supplied oil with all machine mass or count it again inside a provider assembly. - Selected flow: Mineral lubricating-oil formulation - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Polyester dust-filter element (`filter`) One actual finished polyester filter element with identified grade and captured-solid/moisture subledgers. Textile feedstock, filter housing and captured process dust are distinct. - Selected flow: Polyester dust-filter element - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Alumina grinding wheel (`abrasive`) Actual complete bonded-alumina abrasive used for foot/unglazed-surface finishing only; record supplier formulation, wear, coolant and scrap. Alumina powder alone is not the complete bonded wheel. - Selected flow: Alumina grinding wheel - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_asset. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_asset` - Sources: `meissen-figurine-assembly`; `jrc-ceramic-bref-2007` ###### Calcium hydroxide gas-cleaning sorbent (`sorbent`) Only actual separately supplied hydrated-lime sorbent for installed gas cleaning. Keep whole supply, assay, independent water, reaction products, retained stock and spent sorbent. No assumed scrubber or automatic acid-gas removal efficiency. - Selected flow: Calcium hydroxide gas-cleaning sorbent - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ##### Elementary flows ###### oxygen (`oxygen_in`) Gross actual molecular O2 drawn from ambient air for combustion/ventilation; CAS 7782-44-7 and renewable-element resource-from-air compartment only. Native aliases for ions/liquid/isotopes are not authorized uses; measure actual gas-state composition. No industrial bottled-oxygen product or aggregate air duplication. - Selected flow: oxygen `e2fb04b0-6555-11dd-ad8b-0800200c9a66` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### dinitrogen (`nitrogen_in`) Gross actual molecular N2 resource from air, CAS 7727-37-9. Native liquefied/isotope aliases do not change the actual gas identity; not total nitrogen excluding N2. Retain inlet composition and full gas balance. - Selected flow: dinitrogen `08a91e70-3ddc-11dd-96e4-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### argon (`argon_in`) Gross actual natural non-radioactive argon gas, CAS 7440-37-1, renewable-element resource from air. Native Ar-41/Ar-40 isotope aliases do not specify an isotope or activity; Ar-40 is stable, not a radioactive default. Independently measure actual composition and state, without fixed air fractions or fitting a residual. Not an industrial purchased-gas Product. - Selected flow: argon `fe0acd60-3ddc-11dd-a354-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### Carbon dioxide entering with ambient air (`co2_in`) Actual ambient CO2 inlet, with origin and concentration separately recorded; no carbon-capture credit or wholesale fossil/biogenic allocation of ambient mixture. Paired gross pass-through outlet is independent of newly generated CO2. - Selected flow: Carbon dioxide entering with ambient air - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### Water vapour entering with ambient air (`humidity_in`) Actual H2O vapour inlet at measured humidity/temperature/pressure. The volume-native humidity candidate is not a mass-native binding; independent state-specific density or humidity analysis is required. - Selected flow: Water vapour entering with ambient air - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` #### Outputs ##### Product flows ###### Decorative art ceramics (`finished_figurine`) One complete quality-released white hard-porcelain animal figurine, with only actual underglaze manufacturer marking, no metal fitting/electronics/base accessory. Native heat-hardened-clay/porcelain decorative-article family has no fixed route, SKU or supply geography; historical Chinese-porcelain commentary does not prove a plant provider. Primary product evidence narrows this family to the declared all-ceramic object; earthenware, flowerpots and unfinished fragments are excluded. Count the first unique release once, including closing released FG; packaging and later retest do not add Q. - Selected flow: Decorative art ceramics `7c859ac1-bd93-415d-9754-ae93a2dad8a5` - Flow property / unit: Number of items `01846770-4cfe-4a25-8ad9-919d8d378345` / item - Amount rule: 1 item - Value mode: Fixed value (`fixed_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Method formula (`method_formula`) - Collection protocol: `cp_release` - Sources: `meissen-white-lion`; `meissen-figurine-assembly`; `meissen-firing`; `jrc-ceramic-bref-2007` ###### Steam condensate returned to supplier (`condensate_return`) Actual external Product return only when steam was supplied; measured mass, contamination and return enthalpy/state with provider water/energy convention. Internal condensate recycle cancels, a waste drain is separately classified. - Selected flow: Steam condensate returned to supplier - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ###### Heat-exchange water returned to supplier (`hotwater_return`) Actual external Product return from the matching hot-water supply; record gross mass and thermal state independent of net MJ. Not an invented return from an absent utility. - Selected flow: Heat-exchange water returned to supplier - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_utility. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_utility` - Sources: `jrc-ceramic-bref-2007` ##### Waste flows ###### Discarded unfired porcelain body (`unfired`) Only the actual individually identified outgoing discarded unfired porcelain body. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Discarded unfired porcelain body - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Broken fired porcelain (`fired`) Only the actual individually identified outgoing broken fired porcelain. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Broken fired porcelain - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Porcelain body-preparation sludge (`body_sludge`) Only the actual individually identified outgoing porcelain body-preparation sludge. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Porcelain body-preparation sludge - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Porcelain glaze-treatment sludge (`glaze_sludge`) Only the actual individually identified outgoing porcelain glaze-treatment sludge. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Porcelain glaze-treatment sludge - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Porcelain foot-grinding sludge (`grind_sludge`) Only the actual individually identified outgoing porcelain foot-grinding sludge. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Porcelain foot-grinding sludge - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Captured porcelain raw-material dust (`dust`) Only the actual individually identified outgoing captured porcelain raw-material dust. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Captured porcelain raw-material dust - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Porcelain process wastewater (`wastewater`) Only the actual individually identified outgoing porcelain process wastewater. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. Off-site wastewater treatment is a waste transfer, not direct water emission. COD/total metals are indicators, not identified molecular flows. - Selected flow: Porcelain process wastewater - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent plaster casting mould (`spent_mould`) Only the actual individually identified outgoing spent plaster casting mould. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. Separate the asset body, captured material and retained fluid/water subledgers without adding them twice. - Selected flow: Spent plaster casting mould - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent wooden detail mould (`spent_wood`) Only the actual individually identified outgoing spent wooden detail mould. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Spent wooden detail mould - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent silicon-carbide kiln support (`spent_furniture`) Only the actual individually identified outgoing spent silicon-carbide kiln support. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. Separate the asset body, captured material and retained fluid/water subledgers without adding them twice. - Selected flow: Spent silicon-carbide kiln support - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent high-alumina refractory brick (`spent_refractory`) Only the actual individually identified outgoing spent high-alumina refractory brick. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. Separate the asset body, captured material and retained fluid/water subledgers without adding them twice. - Selected flow: Spent high-alumina refractory brick - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Retired porcelain firing kiln (`retired_kiln`) Only the actual individually identified outgoing retired porcelain firing kiln. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. Separate the asset body, captured material and retained fluid/water subledgers without adding them twice. - Selected flow: Retired porcelain firing kiln - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent mineral lubricating oil (`spent_oil`) Only the actual individually identified outgoing spent mineral lubricating oil. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Spent mineral lubricating oil - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent polyester filter element (`spent_filter`) Only the actual individually identified outgoing spent polyester filter element. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. Separate the asset body, captured material and retained fluid/water subledgers without adding them twice. - Selected flow: Spent polyester filter element - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent alumina grinding wheel (`spent_abrasive`) Only the actual individually identified outgoing spent alumina grinding wheel. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Spent alumina grinding wheel - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ###### Spent hydrated-lime gas-cleaning sorbent (`spent_sorbent`) Only the actual individually identified outgoing spent hydrated-lime gas-cleaning sorbent. Record wet/dry mass, chemical composition, free/structural water, treatment destination and transfer ticket. Internal recovery is an internal transfer; retain actual reprocessing burdens. Do not substitute a saleable Product or unrelated municipal/manganese-slag waste. - Selected flow: Spent hydrated-lime gas-cleaning sorbent - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_residue. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_residue` - Sources: `jrc-ceramic-bref-2007` ##### Elementary flows ###### carbon dioxide (fossil) (`co2`) Actual newly generated fossil CO2 gas, CAS 124-38-9, air unspecified only. Native dry-ice/ion/isotope aliases do not authorize those forms. Separate fuel and actual fossil organic carbon from mineral carbonate and ambient pass-through; not delayed or long-term emissions. - Selected flow: carbon dioxide (fossil) `08a91e70-3ddc-11dd-923d-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### Carbon dioxide from mineral carbonates (`co2_mineral`) Actual carbonate-derived CO2 by independent carbonate assay and reaction conversion; no single loss-on-ignition residual can also determine water release. Keep this origin separate from fuel CO2. - Selected flow: Carbon dioxide from mineral carbonates - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### carbon monoxide (fossil) (`co`) Molecular fossil CO gas, CAS 630-08-0, emitted to air unspecified; native exhaust/flue-gas labels mean only CO mass, never whole exhaust. Cryogenic synonyms do not authorize liquid release. Independent chemical measurement is required. - Selected flow: carbon monoxide (fossil) `08a91e70-3ddc-11dd-924e-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### nitrogen monoxide (`no`) Actual NO gas, CAS 10102-43-9, air unspecified. Native HNO/nitrosyl-hydride aliases do not identify NO2 or authorize conversion from NOx-as-NO2. Resolve actual species with independent measurement and molar basis. - Selected flow: nitrogen monoxide `08a91e70-3ddc-11dd-96ee-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### Nitrogen dioxide gas (`no2`) Actual molecular NO2 only, distinct from N2O4 and total NOx indicator. The candidate with tetroxide-only synonyms remains unbound; independent speciation is required. - Selected flow: Nitrogen dioxide gas - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### sulfur dioxide (`so2`) Actual SO2 gas, CAS 7446-09-5, air unspecified only. Do not apply SOx total as if all sulfur were SO2; retain sulfur in products, wastes and other actual species. - Selected flow: sulfur dioxide `fe0acd60-3ddc-11dd-ac48-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### hydrogen fluoride (`hf`) Actual HF released to air unspecified, CAS 7664-39-3, measured as HF mass only. Native acid/solution/isotope aliases do not establish fluorine-element, fluoride-salt or whole scrubber-liquid mass; retain real phase and moisture independently. - Selected flow: hydrogen fluoride `08a91e70-3ddc-11dd-9804-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### hydrogen chloride (`hcl`) Actual molecular HCl to air unspecified, CAS 7647-01-0. Native aqueous-acid/cleaner/reagent aliases do not authorize whole formulation mass or chlorine-element totals. Keep gas/aerosol state and independently determined HCl mass; no long-term compartment substitution. - Selected flow: hydrogen chloride `fe0acd60-3ddc-11dd-aab0-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### methane (fossil) (`methane`) Only independently measured molecular fossil CH4 gas, CAS 74-82-8, to air unspecified. Native synonym contamination includes carbon/graphite, methylene compounds, biogas and isotopes; none changes the explicit methane/CAS identity or authorizes those substances, biogenic origin, whole fuel, VOC/TOC totals, indoor or delayed/long-term release. Preserve actual origin and chemical evidence; no emission factor. - Selected flow: methane (fossil) `08a91e70-3ddc-11dd-9610-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### nitrous oxide (`n2o`) Actual N2O gas, CAS 10024-97-2, air unspecified only. Native liquid/compressed/anaesthetic aliases do not mean those supplied products or NOx total. Record measured gas species without adopting an emission factor. - Selected flow: nitrous oxide `08a91e70-3ddc-11dd-94c3-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### dinitrogen (`nitrogen_out`) Gross actual N2 to air unspecified, CAS 7727-37-9; not a purchased air-separation product and not total nitrogen excluding N2. Include pass-through and actual chemical formation only once. - Selected flow: dinitrogen `fe0acd60-3ddc-11dd-aad2-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### oxygen (`oxygen_out`) Gross actual molecular O2 gas, CAS 7782-44-7, to air unspecified. Measure the real contemporary exhaust/ventilation constituent independently; native liquid, ionic and isotope aliases do not authorize those forms. Not the long-term compartment or the inlet-resource UUID. - Selected flow: oxygen `08a91e70-3ddc-11dd-9745-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### argon (`argon_out`) Gross actual natural non-radioactive Ar gas, CAS 7440-37-1, to air unspecified; contemporary pass-through outlet is distinct from its resource inlet. Native Ar-41/Ar-40 aliases do not authorize isotope/activity assumptions or radioactive-noble-gas flows. Measure independently without an aggregate-air duplicate or an allocation-scaled physical mass. - Selected flow: argon `fe0acd60-3ddc-11dd-a350-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### Ambient carbon dioxide passed through to air (`co2_passthrough`) Actual inlet-derived CO2 output only; do not call the full ambient mixture fossil combustion emission, mineral decarbonation or a credit. - Selected flow: Ambient carbon dioxide passed through to air - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### water vapour (`vapour`) Actual H2O vapour, CAS 7732-18-5, air unspecified. Native ice/liquid/heavy-water/ion aliases do not authorize those forms. Keep separate origin subledgers for ambient humidity, free-water drying, structural-water release and actual combustion/reaction water; only the real same-species total is exported, not duplicated. No mass fitted simultaneously with unknown carbonate CO2. - Selected flow: water vapour `fe0acd60-3ddc-11dd-ac04-0050c2490048` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### Crystalline quartz particles to air (`quartz_air`) Only independently identified crystalline-quartz particulate mass and actual size/phase/compartment. PM totals cannot establish quartz, and ground quartz resources are not emissions. - Selected flow: Crystalline quartz particles to air - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ###### Kaolinite particles to air (`kaolinite_air`) Only actual independently speciated kaolinite particulate. Total clay dust, calcined mixed aluminosilicate and silica indicators are not this species. Add each other real particulate species as a separate row. - Selected flow: Kaolinite particles to air - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_air. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_air` - Sources: `jrc-ceramic-bref-2007` ### Process: Original-cohort services (`service`) #### Inputs ##### Product flows ###### Alternating current (`service_electricity`) Actual incremental packing/warehouse/handling/retest electricity assigned to original cohort and observed H, using its original Qc. Binding only CN user-side grid-average below 1 kV and native MJ; other regions/voltages require matching identity. This is not the cited German maker electricity. - Selected flow: Alternating current `50657322-939c-4829-a87b-47c093bfa6a7` - Flow property / unit: Net calorific value `93a60a56-a3c8-11da-a746-0800200c9a66` / MJ - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_service. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_service` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Tap water (`service_water`) Actual incremental municipal potable water for post-release cleanup or return handling; preserve original Qc, H and independent measured water state. Native treated-water supply excludes raw/recycled/deionized water; secondary coefficients do not supply density. - Selected flow: Tap water `d1e0e36c-07f0-4a75-bdcb-efb5d9e2ac36` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_service. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_service` - Sources: `jrc-ceramic-bref-2007` ###### Corrugated shipping carton (`pack_carton_purchase`) One identified corrugated shipping carton, actual new external purchase. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Do not impose the rejected fixed 16.6% virgin/83.4% recycled fibre native composition; actual carton structure, coatings and supplier composition must be measured. - Selected flow: Corrugated shipping carton - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Corrugated shipping carton (`pack_carton_inbound`) One identified corrugated shipping carton, actual attachment arriving with other supplies. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Do not impose the rejected fixed 16.6% virgin/83.4% recycled fibre native composition; actual carton structure, coatings and supplier composition must be measured. - Selected flow: Corrugated shipping carton - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Corrugated shipping carton (`pack_carton_returned`) One identified corrugated shipping carton, actual external return received. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Do not impose the rejected fixed 16.6% virgin/83.4% recycled fibre native composition; actual carton structure, coatings and supplier composition must be measured. - Selected flow: Corrugated shipping carton - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Cellulose tissue wrapping sheet (`pack_paper_purchase`) One identified cellulose tissue wrapping sheet, actual new external purchase. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Cellulose tissue wrapping sheet - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Cellulose tissue wrapping sheet (`pack_paper_inbound`) One identified cellulose tissue wrapping sheet, actual attachment arriving with other supplies. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Cellulose tissue wrapping sheet - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Cellulose tissue wrapping sheet (`pack_paper_returned`) One identified cellulose tissue wrapping sheet, actual external return received. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Cellulose tissue wrapping sheet - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polyethylene film (`pack_pe_purchase`) One identified polyethylene wrapping film, actual new external purchase. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native PE molecular CAS 9002-88-4 and film form are coherent despite an isolated luggage-classification defect; PET comparison in the comment does not authorize PET, multilayer laminates or a polymer blend. Match actual PE film provider. - Selected flow: Polyethylene film `e64eb06c-6dc9-45f1-b003-3dc6c44b27e2` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polyethylene film (`pack_pe_inbound`) One identified polyethylene wrapping film, actual attachment arriving with other supplies. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native PE molecular CAS 9002-88-4 and film form are coherent despite an isolated luggage-classification defect; PET comparison in the comment does not authorize PET, multilayer laminates or a polymer blend. Match actual PE film provider. - Selected flow: Polyethylene film `e64eb06c-6dc9-45f1-b003-3dc6c44b27e2` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polyethylene film (`pack_pe_returned`) One identified polyethylene wrapping film, actual external return received. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native PE molecular CAS 9002-88-4 and film form are coherent despite an isolated luggage-classification defect; PET comparison in the comment does not authorize PET, multilayer laminates or a polymer blend. Match actual PE film provider. - Selected flow: Polyethylene film `e64eb06c-6dc9-45f1-b003-3dc6c44b27e2` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Pallets, box pallets and other load boards, of wood, pallet collars of wood (`pack_pallet_purchase`) One identified wooden load pallet, actual new external purchase. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native complete manufactured wooden load-platform family at plant; use only the actual whole pallet configuration and compatible provider. This is not loose lumber, a fixed EURO design or a photovoltaic-area record. Measure actual wood and moisture, repair additions/removals and independently measured water exchange through cp_pack; gross physical mass remains separate from inherited purchase/service burden. - Selected flow: Pallets, box pallets and other load boards, of wood, pallet collars of wood `4b49871e-95be-4e0c-9223-9902f9eaa763` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Pallets, box pallets and other load boards, of wood, pallet collars of wood (`pack_pallet_inbound`) One identified wooden load pallet, actual attachment arriving with other supplies. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native complete manufactured wooden load-platform family at plant; use only the actual whole pallet configuration and compatible provider. This is not loose lumber, a fixed EURO design or a photovoltaic-area record. Measure actual wood and moisture, repair additions/removals and independently measured water exchange through cp_pack; gross physical mass remains separate from inherited purchase/service burden. - Selected flow: Pallets, box pallets and other load boards, of wood, pallet collars of wood `4b49871e-95be-4e0c-9223-9902f9eaa763` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Pallets, box pallets and other load boards, of wood, pallet collars of wood (`pack_pallet_returned`) One identified wooden load pallet, actual external return received. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native complete manufactured wooden load-platform family at plant; use only the actual whole pallet configuration and compatible provider. This is not loose lumber, a fixed EURO design or a photovoltaic-area record. Measure actual wood and moisture, repair additions/removals and independently measured water exchange through cp_pack; gross physical mass remains separate from inherited purchase/service burden. - Selected flow: Pallets, box pallets and other load boards, of wood, pallet collars of wood `4b49871e-95be-4e0c-9223-9902f9eaa763` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polypropylene packing strap (`pack_strap_purchase`) One identified polypropylene packing strap, actual new external purchase. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Polypropylene packing strap - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polypropylene packing strap (`pack_strap_inbound`) One identified polypropylene packing strap, actual attachment arriving with other supplies. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Polypropylene packing strap - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polypropylene packing strap (`pack_strap_returned`) One identified polypropylene packing strap, actual external return received. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Polypropylene packing strap - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` #### Outputs ##### Product flows ###### Corrugated shipping carton (`pack_carton_shipped`) One identified corrugated shipping carton, actual gross physical dispatch outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Do not impose the rejected fixed 16.6% virgin/83.4% recycled fibre native composition; actual carton structure, coatings and supplier composition must be measured. - Selected flow: Corrugated shipping carton - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Corrugated shipping carton (`pack_carton_return`) One identified corrugated shipping carton, actual external return outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Do not impose the rejected fixed 16.6% virgin/83.4% recycled fibre native composition; actual carton structure, coatings and supplier composition must be measured. - Selected flow: Corrugated shipping carton - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Cellulose tissue wrapping sheet (`pack_paper_shipped`) One identified cellulose tissue wrapping sheet, actual gross physical dispatch outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Cellulose tissue wrapping sheet - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Cellulose tissue wrapping sheet (`pack_paper_return`) One identified cellulose tissue wrapping sheet, actual external return outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Cellulose tissue wrapping sheet - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polyethylene film (`pack_pe_shipped`) One identified polyethylene wrapping film, actual gross physical dispatch outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native PE molecular CAS 9002-88-4 and film form are coherent despite an isolated luggage-classification defect; PET comparison in the comment does not authorize PET, multilayer laminates or a polymer blend. Match actual PE film provider. - Selected flow: Polyethylene film `e64eb06c-6dc9-45f1-b003-3dc6c44b27e2` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polyethylene film (`pack_pe_return`) One identified polyethylene wrapping film, actual external return outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native PE molecular CAS 9002-88-4 and film form are coherent despite an isolated luggage-classification defect; PET comparison in the comment does not authorize PET, multilayer laminates or a polymer blend. Match actual PE film provider. - Selected flow: Polyethylene film `e64eb06c-6dc9-45f1-b003-3dc6c44b27e2` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Pallets, box pallets and other load boards, of wood, pallet collars of wood (`pack_pallet_shipped`) One identified wooden load pallet, actual gross physical dispatch outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native complete manufactured wooden load-platform family at plant; use only the actual whole pallet configuration and compatible provider. This is not loose lumber, a fixed EURO design or a photovoltaic-area record. Measure actual wood and moisture, repair additions/removals and independently measured water exchange through cp_pack; gross physical mass remains separate from inherited purchase/service burden. - Selected flow: Pallets, box pallets and other load boards, of wood, pallet collars of wood `4b49871e-95be-4e0c-9223-9902f9eaa763` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Pallets, box pallets and other load boards, of wood, pallet collars of wood (`pack_pallet_return`) One identified wooden load pallet, actual external return outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native complete manufactured wooden load-platform family at plant; use only the actual whole pallet configuration and compatible provider. This is not loose lumber, a fixed EURO design or a photovoltaic-area record. Measure actual wood and moisture, repair additions/removals and independently measured water exchange through cp_pack; gross physical mass remains separate from inherited purchase/service burden. - Selected flow: Pallets, box pallets and other load boards, of wood, pallet collars of wood `4b49871e-95be-4e0c-9223-9902f9eaa763` - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polypropylene packing strap (`pack_strap_shipped`) One identified polypropylene packing strap, actual gross physical dispatch outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Polypropylene packing strap - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Polypropylene packing strap (`pack_strap_return`) One identified polypropylene packing strap, actual external return outward. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. - Selected flow: Polypropylene packing strap - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ##### Waste flows ###### Post-release broken porcelain figurine (`service_broken`) Actual destruction after first release keeps its original manufacturing burden; count and weigh by original ID and condition. It does not retroactively reduce original Q or create a new manufacturing output. Actual extra repair/cleaning water and emissions require their own rows. - Selected flow: Post-release broken porcelain figurine - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_service. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_service` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Post-release porcelain cleaning wastewater (`service_wastewater`) Actual post-release cleaning wastewater sent to the documented treatment destination; identify contamination and water mass, retain original-cohort service burden and H. Not the full dispatch return or a direct elementary water discharge. - Selected flow: Post-release porcelain cleaning wastewater - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_service. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_service` - Sources: `jrc-ceramic-bref-2007` ###### Discarded corrugated shipping carton (`pack_carton_waste`) One identified corrugated shipping carton, actual discarded material. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Waste status is not established by an incoming Product UUID; retain this specific waste identity unresolved until a compatible waste record is confirmed.Do not impose the rejected fixed 16.6% virgin/83.4% recycled fibre native composition; actual carton structure, coatings and supplier composition must be measured. - Selected flow: Discarded corrugated shipping carton - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Discarded cellulose tissue wrapping sheet (`pack_paper_waste`) One identified cellulose tissue wrapping sheet, actual discarded material. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Waste status is not established by an incoming Product UUID; retain this specific waste identity unresolved until a compatible waste record is confirmed. - Selected flow: Discarded cellulose tissue wrapping sheet - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Discarded polyethylene wrapping film (`pack_pe_waste`) One identified polyethylene wrapping film, actual discarded material. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Native PE molecular CAS 9002-88-4 and film form are coherent despite an isolated luggage-classification defect; PET comparison in the comment does not authorize PET, multilayer laminates or a polymer blend. Match actual PE film provider. Waste status is not established by an incoming Product UUID; retain this specific waste identity unresolved until a compatible waste record is confirmed. - Selected flow: Discarded polyethylene wrapping film - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Discarded wooden load pallet (`pack_pallet_waste`) One identified wooden load pallet, actual discarded material. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Waste status is not established by an incoming Product UUID; retain this specific waste identity unresolved until a compatible waste record is confirmed. - Selected flow: Discarded wooden load pallet - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ###### Discarded polypropylene packing strap (`pack_strap_waste`) One identified polypropylene packing strap, actual discarded material. This pool has its own opening and closing empty/WIP-attached/FG-attached/reusable stocks, purchases, inbound attachment, external returns, gross shipment, outward returns and waste. Physical masses are never reduced by economic allocation. Internal reuse cancels and is not another purchase; do not count package mass in Q. Waste status is not established by an incoming Product UUID; retain this specific waste identity unresolved until a compatible waste record is confirmed. - Selected flow: Discarded polypropylene packing strap - Flow property / unit: Mass `93a60a56-a3c8-11da-a746-0800200b9a66` / kg - Amount rule: Use the single final quotient for this row in Section 8 after retaining raw unnormalised numerator through cp_pack. Do not divide it again. - Value mode: Calculated from collection (`calculated_value`) - Specificity: Site-specific (`site_specific`) - Normalization basis: per reference flow - Basis kind: Reference flow (`reference_flow`) - Evidence kind: Calculated from collection (`calculated_from_collection`) - Collection protocol: `cp_pack` - Sources: `jrc-ceramic-bref-2007`; `meissen-white-lion` ## 7. Allocation and Co-product Handling | rule_id | applies_to | rule | source_ids | | --- | --- | --- | --- | | a_subdivide | shared operations | For an attributional goal that needs allocation, first separate dedicated operations and use supported virtual subdivision: actual fragments/slip/mark/glaze embodied in one design follow that design; document shared meter disaggregation. No allocation just because different products share a site. | `jrc-ilcd-allocation-2010` | | a_physical | remaining individual exchanges | Determine and quantify exchange-specific physical causality for each residual shared exchange, using the property or combined properties actually determining the function. Kiln occupancy/time, heating and support masses are candidates to prove, not automatic keys. A single mass or economic factor cannot govern all flows. | `jrc-ilcd-allocation-2010` | | a_residual | genuinely inseparable residual | Only genuinely unassigned residuals after those steps use contemporaneous market values of actual co-functions in their real condition at the common process gate. Retain quantities, values, time, market and uncertainty and sensitivity. No arbitrary physical/economic choice, fixed shares, automatic substitution or avoided-burden credit. | `jrc-ilcd-allocation-2010` | | a_not_coproduct | internal loops failures packaging assets | Internal slip/trim/glaze/water recirculation, failures, packaging returns, mould reuse, spent supports and retired assets are not automatically coproducts. Retain their actual material/waste/service functions and full physical balances; economic burden allocation never scales gross physical stocks or emissions used for balance. | `jrc-ilcd-allocation-2010` | | asset_manufacture_conservation | existing capital/reusable manufacture attribution | Within the applicable allocation decision context, original manufacture burden attributed across uses of actual capital equipment or reusable articles already included in foreground production, packaging or observed services uses one persistent same-asset ledger across all crops, products, cohorts, manufacturing/postrelease services, owners and observation periods. D is its supported whole installed service: all realized historical service plus supported remaining service in the same units as actual beneficiary use u; D must be finite and positive. Period capacity, remaining-only capacity, the physical asset/article mass alone, or current-period product Q alone is not D; supported whole-service throughput in mass units may be used when it demonstrates the causal service and matches u. This does not amortize the manufactured reference product over downstream life or change its declared reference gate/Q. The fractions u/D and all previously assigned manufacture shares together must never exceed 1. Changes of window, custody, provider or repair never restart the original manufacture balance. Replacements have distinct identities and only their real new manufacture vectors; actual repair and treatment increments remain separately accounted. Revised capacity evidence requires transparent reconciliation of prior shares and sensitivity, not a fresh ledger. Keep full physical mass and stock movements independent of burden shares. Unknown D, prior shares or beneficiary coverage requires review and no final manufacture-attributed amount; no assumed lifetime, utilization, zero or arbitrary division is permitted. For each existing collection protocol that attributes manufacture of included production, packaging or observed-service assets across uses in this route (excluding amortization of the manufactured reference product itself), additionally retain a durable asset identity, its measured full physical mass and acquisition/installation/retirement stock history, original manufacture burden vector, all historical and current beneficiaries, matched-unit service readings, the evidenced whole installed-service denominator D, supported remaining-service basis and uncertainty, prior assigned shares and remaining original manufacture balance. Carry the ledger across reporting windows and custody/provider changes. Collect actual repair, replacement, recovery and treatment separately; these records do not normalize physical movements or create an additional asset purchase. These are added fields and conservation obligations for the existing applicable protocols, not a new assumed capital inventory. | | ## 8. Foreground Data Collection, Calculation, and Quality Rules These are collection requirements for a future real site, not collected factory quantities. Every protocol stores unnormalised raw records; its aggregation label identifies the eventual reporting basis only. Only final_exchange divides once after raw-unit conversion, stock accounting and justified attribution. ### Data Collection Protocols For each existing collection protocol that attributes manufacture of included production, packaging or observed-service assets across uses in this route (excluding amortization of the manufactured reference product itself), additionally retain a durable asset identity, its measured full physical mass and acquisition/installation/retirement stock history, original manufacture burden vector, all historical and current beneficiaries, matched-unit service readings, the evidenced whole installed-service denominator D, supported remaining-service basis and uncertainty, prior assigned shares and remaining original manufacture balance. Carry the ledger across reporting windows and custody/provider changes. Collect actual repair, replacement, recovery and treatment separately; these records do not normalize physical movements or create an additional asset purchase. These are added fields and conservation obligations for the existing applicable protocols, not a new assumed capital inventory. | protocol_id | process_id | flow_role | record_type | raw_fields | collection_method | unit | frequency | temporal_coverage | site_scope | aggregation_rule | quality_evidence | | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | | cp_material | manufacture | Each actual supply and formulation | raw_foreground_record | supplier lot; whole received mass; grade; route; moisture; assay; separate recipe input; preparation stage; waste; internal transfer; opening_raw; closing_raw; opening_WIP; closing_WIP; unassigned_stores; inherited_vector_j; gross_receipt_or_already_net_consumption_basis; stock_adjustments_already_included; independent_opening_closing_raw_WIP_nonWIP_physical_quantities; complete_inherited_exchange_vectors | Calibrated weighing and matched invoices/assays; reconcile each lot through raw preparation and wet/dry part assembly without duplicating whole formulations or carriers. Record gross versus already-net consumption explicitly and preserve adjustments already included, independently measuring all disjoint opening/closing raw/WIP/non-WIP physical quantities and every inherited exchange vector. Do not apply the same stock correction twice. | kg | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | | cp_utility | manufacture | Each meter fuel heat carrier and inbound freight | raw_foreground_record | stage; firing_ID; operating_mode; raw_reading; unit; start; end; totalised_or_rate; fuel_supply; stock; temperature; pressure; density_evidence; heating_value; enthalpy_supply; enthalpy_return; carrier_mass; provider_convention; actual_load; distance | Read calibrated stage/cycle meters and real provider/transport records including failed, hot-hold, idle, mould drying and cleanup; keep each energy/volume/mass stream native and unnormalised. | row native units | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | | cp_asset | manufacture | Each mould kiln refractory support and fluid | raw_foreground_record | asset_ID; design; cavity; material; opening_unused; opening_installed; additions; actual_water; in_machine_fluid; maintenance; closing_unused; closing_installed; retired; actual_cycles; observed_use; inherited_vector_j | Weigh or use traceable calibrated component records for each complete asset/material and actual fluid/water; reconcile physical movements separately from empirically supported period service burden. | kg | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | | cp_air | manufacture | Each individual inlet and outlet species | raw_foreground_record | species; CAS; origin; phase; compartment; concentration_basis; dry_wet_basis; inlet_composition; gas_total_or_rate; time_interval; temperature; pressure; humidity; particle_phase; calibration; detection_limit; blanks; independent_elements; conversion_evidence | Use actual speciated monitoring with matched gas basis or independent validated reaction/material data; integrate true rates only. Keep PM/VOC/COD/NOx/total-element indicators separate from identified molecular masses. Unknown species remain unknown. | kg | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | | cp_residue | manufacture | Each separate waste and actual treatment | raw_foreground_record | stream_ID; stage; wet_mass; dry_mass; free_water; structural_water; composition; dissolved_species; waste_status; transfer_ticket; destination; retained_stock; internal_recovery; reagent_receipt | Weigh each waste and sample independently; retain off-site treatment tickets and actual in-site cleaning reagent/effluent records. Dissolved species are subledgers of outgoing wastewater unless directly emitted, not a duplicate mass. | kg | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | | cp_release | manufacture | Only first completed-figurine release | raw_foreground_record | design; fragment_lineage; unique_ID; first_release_time; Q; net_complete_mass; scale_calibration; moisture_state; geometry; surface_test; crack_test; deformation_test; mark_check; failure; unreleased_WIP; closing_released_FG | Count each complete accepted object once; reconcile physical IDs and actual acceptance results including held released FG. Weigh the same complete design on a calibrated scale without packaging; preserve test failures and unproduced burdens. | item; kg | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | | cp_service | service | Each original released cohort and observed service | raw_foreground_record | cohort_ID; original_Qc; H; opening_FG; first_release_transfer; gross_dispatch_G; return_R; original_dispatch_ID; actual_return_mass; moisture_change; repair_input; loss; closing_FG; destruction; raw_meter; inherited_manufacturing_vector_j; manufacturer_permission; actual_rework_route; material_glaze_compatibility; reacceptance_results; measured_added_material; measured_added_water; measured_removed_old_material; independently_measured_water_loss; actual_destinations | Use gross ID-linked receipt/dispatch/return records and actual incremental service meters, repair and waste. Retain original cohort count and inherited history; a return is not assumed to match original mass or contain no new water/loss. Any actual post-release rework requires documented manufacturer-compatible permission for the particular body/glaze/mark and restoration of the original complete ceramic-only terminal, followed by actual reacceptance of geometry, cracks, surface and marking. Do not assume repairability, a pass, extra refiring or cold organic restoration; incompatible adhesive/coating/component repair requires a separately reviewed scope. Identify every added material/water and removed old material/loss as an actual specific exchange, retain their destinations and avoid duplicating water carried in another measured stream. | row native units | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | | cp_pack | service | Each single package material/configuration | raw_foreground_record | package_ID; material; provider; ownership; opening_empty; opening_WIP_attached; opening_FG_attached; opening_reusable; purchase_P; inbound_attachment_I; external_return_received_ER; closing_empty; closing_WIP_attached; closing_FG_attached; closing_reusable; gross_shipped_S; outward_return_EO; waste_W; internal_reuse; inherited_vector_j; dry_material; moisture_state; repair_material_added_Radd; repair_material_removed_Rremove; independent_water_uptake_H2Oin; independent_water_release_H2Oout; repair_input_identity; removed_material_destination | Calibrated separate packaging masses and matched gross movement tickets including raw-material arrival packs; disjoint empty/attached/reusable pools per configuration. Each new material gets its own rows and balance; no economic scaling of mass. Independently record actual repair material addition/removal and water uptake/release outside existing whole-package streams, without double counting. Every real wood/adhesive/fastener/water or removed-material outlet requires its own specific atomic row and supplier/destination; missing measurement is not zero. | kg | each lot/cycle/movement | declared representative period plus opening history and actual H | actual site and original design/cohort | per reference flow | calibration original records lineage and unknowns | ### Calculation Rules | rule_id | Applies to | Formula or rule | Inputs | Output | source_ids | | --- | --- | --- | --- | --- | --- | | raw_conversion | all inventory rows | Convert raw measurements to each native extensive numerator unit before stocks/attribution. Integrate genuine rates over recorded intervals once; retain totalised volumes as totals; convert kWh to MJ by 3.6. Density/enthalpy/heating value require independent actual substance/state evidence; no secondary-coefficient inference. | raw_reading; state_evidence; unit_factor | raw_extensive_amount | `jrc-ceramic-bref-2007` | | manufacturing_stock | manufacture | For each exchange j use A_j = Bopen_j + P_j - Bclose_j - Tother_j after internal cancellation and justified attribution. Bopen/Bclose hold inherited raw, unreleased WIP and unassigned non-WIP-store vectors only. P includes every real operating mode and losses. Tother is separately justified burden assigned outside the target cohort. Already-released closing FG is not in Bclose. Unknown history is not zero. Declare whether each raw basis is a gross receipt/occurrence or an issue/consumption amount already adjusted for stock. Apply only stock adjustments not already included in that basis, never the same raw-stock correction twice. Independently record every raw/WIP/unassigned non-WIP opening and closing physical quantity and its full inherited per-exchange vector, including the upstream history of consumed opening material. Ordinary waste, rejects, failed loads or a sale alone do not establish Tother burden export or credit; any transfer needs a real distinct cohort/function and justified attribution once. | Bopen_j; P_j; Bclose_j; Tother_j; cp_material; cp_asset; cp_release | A_j | `jrc-ceramic-bref-2007`; `jrc-ilcd-allocation-2010` | | first_release | finished_figurine | Q is the count of unique complete objects first quality-released in the declared design/cohort, including those held in closing FG. Unreleased fragments/WIP and failures do not enter Q; their attributable burdens remain. Retest, return, repair and re-dispatch never create another first release. | cp_release; unique_first_release_IDs | Q | `jrc-ceramic-bref-2007`; `meissen-white-lion` | | cohort_services | service | For each original cohort retain its manufacturing vector and original Qc. Assemble Aservice_j from actual incremental services through observed H after justified assignment; do not transfer old manufacture into a new production Q. Count/ID bridge: opening FG + first-release receipts + actual returns = closing FG + gross dispatch + actual destruction + separately evidenced other physical exit. Independently reconcile actual physical mass: opening + first-release receipts + returns + separately measured added material/water = closing + gross dispatch + destruction + removed old material + separately measured water loss + other actual exits. All terms are disjoint; water/material already carried by a measured stream is not added again. Record actual returned condition, actual maker-permitted compatible rework and reacceptance, every incremental input and outlet; no blind reversal or net-delivery denominator. Actual performed service for held closing FG retains its burden; holding the goods does not justify a service deduction. For FG and packaging physical movement cards, Aservice_j is the full measured gross quantity of that particular leg, not a burden vector, a second stock correction or an economically scaled amount. Keep these ledger-only results distinct from actual attributed supplier/operation burdens; a physical shipment, supplier-included receipt or return creates neither another purchase nor coproduct credit. Preserve the independently matched original delivery record; a changed wet return is not an assumed reversal of the original delivery quantity. | cp_service; Qc; H | Aservice_j | `jrc-ceramic-bref-2007` | | final_exchange | all inventory rows | The sole unit-result operation is a_j = A_j / Q for manufacture and aservice_j = Aservice_j / Qc for separately labelled original-cohort services over H. Apply only after raw conversion, stocks and attribution; cards reuse this result and protocols retain raw totals without another division. Q=0 or Qc=0 retains actual burdens and produces no unit result. The reference output is 1 item. Consolidation combines corresponding original-cohort results while cancelling the internal Q hand-off exactly once. For ledger-only physical FG/package movements use their full actual gross numerators defined in cohort_services after native-unit conversion, without burden-vector additions, stock correction or allocation scaling. Report those normalized physical legs separately from attributed manufacturing/service burdens; normalization itself creates no provider purchase or credit. | A_j; Q; Aservice_j; Qc; cp_release; cp_service | a_j; aservice_j | `jrc-ceramic-bref-2007` | | package_bridge | cp_pack | For each material/configuration: opening empty + opening WIP-attached + opening FG-attached + opening reusable + P + I + ER + Radd + H2Oin = closing empty + closing WIP-attached + closing FG-attached + closing reusable + S + EO + W + Rremove + H2Oout. Pools and gross directions are disjoint. Radd/Rremove are independently measured actual repair material added/removed outside the already recorded whole-package directions; H2Oin/H2Oout are actual water uptake/release outside water already carried in those measured streams. Keep dry wood/material and free/absorbed water subledgers; never infer either from one wet residual. Add a specifically identified atomic exchange for every real repair wood, adhesive, fastener, cleaning water and removed material/water outlet with correct supply/waste/emission status, ownership and original-cohort history; cancel internal component transfers once. Internal reuse cancels, gross physical terms are unallocated, package mass never enters Q. Assign purchase/service and inherited packaging burden once to actual original cohorts; stock changes cannot erase inherited vectors. | cp_pack; P; I; ER; S; EO; W; Radd; Rremove; H2Oin; H2Oout | packaging_residual | `jrc-ceramic-bref-2007` | | assets_physical_service | cp_asset | Reconcile each mould, kiln, refractory, support, repair part and installed fluid by actual opening + new and returned receipts + independently measured water/material addition = closing + outward return + retirement/waste + actual loss. Separately assign its observed period service burden with inherited vectors using documented deployment/cycles/causality; no fixed life, one asset per item, or economic fraction of gross asset mass. | cp_asset; inherited_vector_j; observed_use | asset_balance; period_asset_service | `jrc-ceramic-bref-2007`; `jrc-ilcd-allocation-2010` | | species_gates | manufacture and service | Independently close total physical mass and relevant C/H/O/Si/Al/Ca/Mg and actual other elements at manufacture, FG-service and combined gates with actual air inlet/outlet species, wet/dry states, rejected material and carrier returns. Use measured mineral composition and independent reaction/phase-water evidence; do not equate firing loss with water, fit carbonate CO2 and water from one residual, or convert a COD/VOC/NOx/total-element indicator to a guessed species. Keep unidentified residuals explicit. | cp_air; cp_material; cp_residue; cp_asset; cp_release; cp_service | mass_element_species_residuals | `jrc-ceramic-bref-2007` | | asset_manufacture_share | existing capital/reusable manufacture attribution | For each included original asset manufacture vector B, f_current = u_current / D only after the persistent ledger verifies the supported whole installed-service denominator, all beneficiaries and prior assigned shares. Attribute f_current * B once to the actual beneficiary before the existing single reference normalization. Check prior_shares + all current/new beneficiary shares <= 1; carry the remaining original balance. Capacity revisions reconcile the historical ledger. Full physical asset/packaging mass and actual gross stocks/returns never receive f_current. Unknown D or history leaves the final attributed result unavailable, without suppressing actual repair/replacement/service burdens. | asset_id; original_B; u_current; D; historical_beneficiaries; prior_shares; capacity_evidence | conserved attributed manufacture vector | | ### Data Quality Requirements | requirement_id | Applies to | Requirement | Evidence | | --- | --- | --- | --- | | dq_identity | each flow | Apply every native material, form, grade, route, geography, medium, type and property restriction in the full card context. Ordinary unbound auxiliary/provider data remains a disclosed gap; never substitute incompatible core identity. | Full native records and actual supply specification | | dq_coverage | all actual stages | Retain failures, zero output, start/stop, idle, cleaning, repairs and each firing; map every ID to raw records and inherited exchange vectors. Missing history/speciation is unknown and cannot be labelled pass. | Representative-period raw logs stock and cycle history | | dq_measure | each raw observation | Use calibrated instruments and independent density/moisture/chemistry/enthalpy evidence, stated detection limits and raw units. No illustrative manufacturer’s quantity or native secondary coefficient is a foreground measurement. | Calibration samples analytical basis and uncertainty | | dq_cohort | manufacture and services | Keep design, part assembly, first release, original FG cohorts, H, Q/Qc, packaging and asset physical balances separately traceable before consolidation. | Unique IDs gross movements and inherited vectors | ## 9. Validation Rules | rule_id | applies_to | rule | source_ids | | --- | --- | --- | --- | | v_reference | reference and output | Verify one complete qualified ceramic-only figurine and exact count/property/unit; finished_figurine uniquely selects the Product output. Qualifiers and actual first-release tests must all be supplied; no unknown core identity may be treated as usable. | `meissen-white-lion`; `meissen-figurine-assembly`; `meissen-firing` | | v_complete | actual route | Check complete raw-to-release operations and each real heat source/firing plus whole-formulation purchase once. Actual extra inputs/waste/species need atomic rows; no apparently absent zero can conceal an unmeasured exchange. | `meissen-raw-preparation`; `meissen-figurine-assembly`; `meissen-glazing`; `meissen-firing`; `jrc-ceramic-bref-2007` | | v_denominator | all exchanges | Check raw numerator conversion and justified attribution precede the sole final_exchange division. Q includes already-released closing FG without deducting its manufacturing vector. Services use original Qc and H; no Q+closingFG double output, current-period service denominator or Q0 unit result. | `jrc-ceramic-bref-2007`; `jrc-ilcd-allocation-2010` | | v_physical | manufacture FG combined | Check independent mass and relevant element/species closure, free/structural/reaction water, carbonate gas, air constituents and actual heat-carrier returns. All gross packaging and asset bridges must close before economic allocation. Residual or unknowns require investigation, not an invented species or zero. | `jrc-ceramic-bref-2007`; `jrc-ilcd-allocation-2010` | | v_allocation | shared burdens | Verify dedicated/virtual subdivision, exchange-specific determining physical causality and only then documented genuine residual market value at the same actual process gate/state/period. Do not infer approval from a numerical schema or engineering pass. | `jrc-ilcd-allocation-2010` | | validate_asset_manufacture_conservation | existing capital/reusable manufacture attribution | For every included capital/reusable manufacture attribution verify same-asset continuity, whole installed service in matched units, all historical/current beneficiaries, prior assigned manufacture shares and cumulative share <= 1. Reject a reset by period, cohort, provider, owner or repair. Check distinct real replacement and incremental repair/treatment vectors separately and preserve gross physical mass. A missing denominator, unexplained previous allocation or incomplete beneficiary ledger requires explicit review and an unavailable final attributed amount; structural inspection cannot claim empirical completeness. | | ## 10. Published Dataset Profile | Field | Value | | --- | --- | | dataset_role | secondary_dataset; background_dataset | | downstream_use | Only compatible complete white-porcelain-figurine manufacturing inventory and separately labelled observed services | | allowed_use | Site/design/route-specific attributional production accounting with complete upstream links and stated Q/Qc/H; screening with uncertainty explicitly disclosed | | excluded_use | Automatic CPC coverage or methodology approval; equal decorative-service comparison; tableware/sanitary/electrical ceramics; resin/metal/electronic assemblies; unsupported use life or net-delivery accounting; per-kg or area claims without a separately evidenced conversion | | required_metadata | All Section 3 qualifiers plus original records protocol IDs upstream provenance and full normative context | | required_quality_disclosure | Measurement and identity/provider gaps; inherited raw/WIP/FG/asset vectors; service horizon completeness; species/density/heat uncertainty; physical residuals and actual allocation decisions | | update_trigger | Changed body/glaze/mark formulation or mould/assembly/firing route; actual extra decoration/component; supplier/native restriction change; quality gate or cohort/stock boundary change | ## 11. Data Sources | Source id | Type | Reference | Used for | | --- | --- | --- | --- | | jrc-ceramic-bref-2007 | official_guidance | European Commission, Ceramic Manufacturing Industry BREF, August 2007, §2.3.6 pp.64–70; figures 2.22–2.23 and tables 2.15–2.20. https://bureau-industrial-transformation.jrc.ec.europa.eu/sites/default/files/2019-11/cer_bref_0807.pdf | Independent ceramic material preparation, forming, drying, actual firing/decoration alternatives, subsequent finishing/QC/packaging and environmental streams. Qualitative context only; not measured figurine recipe, yield, kiln demand or allocation authority. | | meissen-raw-preparation | literature | MEISSEN, Kaolin & the Mine; https://www.meissen.com/en/craft/kaolin | Primary washing/settling and blending of kaolin with ground feldspar/quartz to actual paste/slip; upstream preparation boundary. No proportions or future site quantities. | | meissen-figurine-assembly | literature | MEISSEN, Demonstration Workshop; https://www.erlebniswelt-meissen.com/en/experience/demonstration-workshop | Primary multipart figurine moulding and slurry assembly/retouching, hand details and underglaze marking; onglaze turpentine/extra-firing and round tableware context are adjacent excluded routes. Not one SKU bill of materials. | | meissen-glazing | literature | MEISSEN, Glazing; https://www.meissen.com/net/craft/glazing | Primary transparent glaze raw-material family and delicate-figurine spray mist/tracing tint versus tableware dipping; actual formulation/medium must be independently collected. | | meissen-firing | literature | MEISSEN, Bisque & Glaze Firing; https://www.meissen.com/int/craft/firing | Primary drying/biscuit then mark/glaze/glost sequence and final fired surface; not an adopted kiln temperature, time, fuel or shrinkage default. | | meissen-white-lion | literature | MEISSEN, Meissen Atelier Lion, Art.-No. 000001-78018-1; https://www.meissen.com/en/000001-78018-1.html | Primary real white porcelain animal-sculpture terminal and gift-box context. Product-specific listed mass/dimensions and adjacent coloured/stoneware recommendations are not conversions or scope expansion. | | jrc-ilcd-allocation-2010 | official_guidance | JRC ILCD Handbook, General guide for LCA — Detailed guidance, first edition March 2010, §7.9.3 pp.257–258 and referenced subdivision context; https://eplca.jrc.ec.europa.eu/uploads/ILCD-Handbook-General-guide-for-LCA-DETAILED-GUIDANCE-12March2010-ISBN-fin-v1.0-EN.pdf | Attributional allocation only when required: dedicated/virtual subdivision and exchange-specific determining physical causality before genuine residual actual-gate/state market value. Not industrial manufacturing data or automatic recycling credit. |